All chips become "problematic" the moment you start playing with themWell if the whites are known to be problematic, then I might go with a gray instead.
All chips become "problematic" the moment you start playing with themWell if the whites are known to be problematic, then I might go with a gray instead.
All chips become "problematic" the moment you start playing with them
Well if the whites are known to be problematic, then I might go with a gray instead.
Where did you get an idea that whites are
Problematic? And what problems are you worried about?
If you cant' stand any (suspicion of) imperfection, don't get any white chips.
What pics are you referring to? If it's the gone but not forgotten thread I don't recall comparison pics of chips over time about colour transfer nor anything mentioned in that thread in regards to bright white known to being problematic. Is this the pic you're referring to?I looked at some pictures from the old custom chips thread and saw some white chips that over time had gotten transfer from their spot colors (darker colors like brown/black, etc).
Needless to say you should get some samples of all candidate types of chips, and if you go the CPC way, definitely get their full color-chart sample before any attempt at ordering.
Let me add that true clay chips (ie CPCs and Paulsons) are NOT characterised by industrial precision. If you 're looking for immaculate edge spots (which I suspect you are) you 'd better search for high-end plastics (be it Matsuis, or Bud Jones or similar).
What pics are you referring to? If it's the gone but not forgotten thread I don't recall comparison pics of chips over time about colour transfer nor anything mentioned in that thread in regards to bright white known to being problematic. Is this the pic you're referring to?
View attachment 302923
I think your fears are unfounded. Play with any color clay chip long enough (by any manufacturer) and it will eventually need to be cleaned. It's just part of the clay chip ownership process, and certainly not a reason to pick or avoid specific colors.I'm referring to several of the pictures in the "Gone but not forgotten" thread. There's one in particular of a white chip with chocolate spots and the chocolate transferred to onto the white after being in play for awhile. The chip looked really dirty, but it was just color transfer. Maybe I'm using the wrong term, as I'm not talking about color transfer from the production process, but rather color transfer from the friction with other chips.
That got me spooked when going with white on my $1 chips. I can see a little transfer on your white chips, so I just wondered how long they had been used and if that's standard for all white chips over time.
That isn't colour transfer... it's not even the same colour as the brown spots... that's good old fashioned dirt.Yes, this is the picture. It's also the exact mold that I would like too. Is this typical or am I mis-reading the picture?
Yes, lol, that's what I'm trying to work through ahead of timeand don't sweat the small stuff.
I can see a little transfer on your white chips, so I just wondered how long they had been used and if that's standard for all white chips over time.
Obviously I misinterpreted that then... I had no idea the point of the closeup picture was to highlight the "dirt", lol.That isn't colour transfer... it's not even the same colour as the brown spots... that's good old fashioned dirt.
I’m excited for you in taking this customs journey. But dont get too hung up on perfection.. it only leads to suffering, suffering leads to hate, hate leads to... the dark side....
No... the close up was to highlight the missing brown spot at the top.Obviously I misinterpreted that then... I had no idea the point of the closeup picture was to highlight the "dirt", lol.
I don’t see a lot of imperfections. But maybe there’s something that seems off to you?
Ahhhh, I see... I was scrolling through the pictures at a furious pace, so I really didn't have any context for the picture. Missed the obvious. Thanks for the clarification =)No... the close up was to highlight the missing brown spot at the top.
Therein lies the problem... take your assumptions out of the process and you'll be better off.I was just making assumptions and trying to gather info.
CPC does this by default, unless you ask otherwise. They will match your mock-up.the inlays are all rotated the same in relation to the chip spots
I'd guess that those are manufacturing imperfections.As for the flecks of black/red on your zoomed in picture of the white chip, I assumed that those were not there when you received the chip, but they were put there over time by other chips coming into contact with it.
Do you know what color these edge spots are or how we could do the comparison?My favorite bright white CPC chip:
View attachment 302939View attachment 302940View attachment 302941
I'll guess:Do you know what color these edge spots are or how we could do the comparison?