GB *Interest* for High Quality Injection Molded Chips - 2020 (3 Viewers)

Status
Not open for further replies.
I think we have good options to work with in the above pic, go for some type of spot progression, but start with the 100 and work down, the frac doesn't need to be simple, just simpler
 
Busy but not too busy IMO and better than the matsui issue where the spot was the same ratio as the base.
 
I'm having a hard time getting a 5 denom cash set with these mold options. Definitely open to suggestions.

Why not go 6 denom?
25¢ - 5.04.011 (white sample)
$1 - 5.04.012 (teal sample)
$5 - 5.04.013 (lt blue sample)
$25 - 5.14.011 (green sample)
$100 - 5.14.012 (yellow sample)
$500 - 5.14.013 (grey sample)
Workhorse and blind chips are 2-color and value chips are 3-color.
 
Why not go 6 denom?
25¢ - 5.04.011 (white sample)
$1 - 5.04.012 (teal sample)
$5 - 5.04.013 (lt blue sample)
$25 - 5.14.011 (green sample)
$100 - 5.14.012 (yellow sample)
$500 - 5.14.013 (grey sample)
Workhorse and blind chips are 2-color and value chips are 3-color.

There is a 775 € setup fee for denoms that do not meet the 1000 chip minimum. How many use $500 in their cash games. @Changster ;)
 
Is the focus going to be on a cash set then and not tournament?
 
2019-11-12_13-50-23.png
2019-11-12_13-50-38.png
2019-11-12_13-50-57.png
2019-11-12_13-51-16.png
2019-11-12_13-51-31.png
2019-11-12_13-51-44.png
 
  • Like
Reactions: ovo
Is the solid only 11g vs. 12g on the others (looking through the catalog)

I'm not sure about the published weights. I weighed a few chips (pics in FP) and the 39mm chips were under 11g.
 
Are blanks available from this vendor? If so, will we be ordering them in addition to whatever label design is used? Sorry if this has been asked/answered already.
 
Are blanks available from this vendor? If so, will we be ordering them in addition to whatever label design is used? Sorry if this has been asked/answered already.

No option to order blanks.
 
Will the final designs have denominations on the actual chip ring, or just on the inserts? .... or is that still being decided?
 
I wanna see tourney chips! I have money to burn! :whistle: :whistling::dead:

How much do have to burn? :unsure: A custom inner ring with the set name and a design would be over the top. It would add about 19 cent per chip for a 20K chip order.
 
How much do have to burn? :unsure: A custom inner ring with the set name and a design would be over the top. It would add about 19 cent per chip for a 20K chip order.
600-1000 chips, Hopefully under/at $2/ea? I’d really like a 2 table set. Hoping to find more stuff to sell off by the time ordering is ready! :tup:
 
Status
Not open for further replies.
Back
Top Bottom