CPC General discussion thread (2 Viewers)

[Sprouty]

One inch.

 

[Rhodeman77]

One inch.

that’s what she said!

 

[Sprouty]

that’s what she said!

One inch....
From the floor...

 

[Rhodeman77]

One inch....
From the floor *while laying on your stomach

View attachment 679752

Fixed that for you.

 

[Poker Zombie]

1 1/8 would be my buy point

Or a hotstamp - that would be a slam dunk.

 

[khp]

For custom chips: the inlays are directly printed on the chip right? It’s not a sticker? And, can colours not offered in the chip colour chart be used in the inlay?

 

[Eloe2000]

For custom chips: the inlays are directly printed on the chip right? It’s not a sticker? And, can colours not offered in the chip colour chart be used in the inlay?

The inlay is a piece of laminate that is pressed into the chip. So not a sticker but also not printed on the chip.

Yes you can use all CMYK colors.

 

[khp]

The inlay is a piece of laminate that is pressed into the chip. So not a sticker but also not printed on the chip.

Yes you can use all CMYK colors.

Thank you!

 

[Eloe2000]

Where can I find the best fit racks for CSQ?

 

[Marhault]

Is the standing guidance still to grab racks for CPCs (CSQ/non-Scrown) from Dennis @ Key West?

That's what I did for my rounders and most likely what I'm going to do for my custom cash set. They're nice racks. I was looking at some different storage options but I keep coming back to those.

 

[RainmanTrail]

Is the standing guidance still to grab racks for CPCs (CSQ/non-Scrown) from Dennis @ Key West?

Depends who you ask I guess. I refuse to give that guy a penny. I just use the cheap China racks for CPCs. They work great. Once you get them in play a few times though, they should fit snug in chipco racks. Also wood racks from chanman or alecnet, or custom 3d printed racks are nice options too.

 

[Irish]

Is the standing guidance still to grab racks for CPCs (CSQ/non-Scrown) from Dennis @ Key West?

For most new CPCs (including CSQ), yes these are the best fit.

 

[jbomb1018]

Are the racks that key west sells the same as the ones from CPC?

 

[Eloe2000]

Depends who you ask I guess. I refuse to give that guy a penny. I just use the cheap China racks for CPCs. They work great. Once you get them in play a few times though, they should fit snug in chipco racks. Also wood racks from chanman or alecnet, or custom 3d printed racks are nice options too.

I won’t open that Pandora’s box here, but I will say that I am looking for plastic racks for a bird cage. The cheap-o racks are fine but I really hate the flimsy feel. I have plenty of those as is taking up space. I really like the sturdy feel of my Paulson and Chipco racks but I want a nice snug fit.

 

[Marhault]

Are the racks that key west sells the same as the ones from CPC?

No they're different

 

[Eloe2000]

Are the racks that key west sells the same as the ones from CPC?

Apparently not.

 

[AK Chip]

CPC's $5 racks fit CPC chips perfectly. I haven't owned all molds but the ones that I have all fit nice and snug.

 

[jbomb1018]

So for CSQ, the recommendation would be to get the key west racks?

 

[TKEUofM]

So for CSQ, the recommendation would be to get the key west racks?

I just got 10 racks from Key West for my CPC Rounders CSQ mold chips and they fit perfectly.

 

[Quicksilver-75]

I usually buy the chipco racks from BRPro. Work perfectly for HHR, FDL and Scrown. Just need a bit sanding to remove any mold nubs.

 

[Justin Olson]

I totally missed this but what was the best racks for scrowns?

 

[madforpancakes]

Where can I find the best fit racks for CSQ?

I use cheapo Made In China racks. CPCs are a little taller than Paulsons, so you'll never get 20 in a barrel in Paulson racks, so the extra room in the cheap racks fits them perfectly. It helps that I had a pile of them sitting around, the fit is good enough that I didn't see much of a reason to spend $40 on new racks.

 

[jbomb1018]

I use cheapo Made In China racks. CPCs are a little taller than Paulsons, so you'll never get 20 in a barrel in Paulson racks, so the extra room in the cheap racks fits them perfectly. It helps that I had a pile of them sitting around, the fit is good enough that I didn't see much of a reason to spend $40 on new racks.

Would you mind taking a few pictures to show them in the racks?

 

[krafticus]

I've always purchased the 67.7 racks from @dennis63 for any CPC/ASM chip, and they work perfectly. Paulson and Chipco (66.7) racks tend to be a tad too snug, and I can't always get 20 chips in.

 

[Eloe2000]

I've always purchased the 67.7 racks from @dennis63 for any CPC/ASM chip, and they work perfectly. Paulson and Chipco (66.7) racks tend to be a tad too snug, and I can't always get 20 chips in.

I have Chipco and the numbered Paulson racks at home and I couldn’t get 20 chips (Amold color samples) in either.

 

[madforpancakes]

Would you mind taking a few pictures to show them in the racks?

https://www.pokerchipforum.com/threads/the-definitive-poker-chip-rack-thread.65035/post-1292043 (MIC) and https://www.pokerchipforum.com/threads/the-definitive-poker-chip-rack-thread.65035/post-1293172 (67.7)

 

[raynmanas]

I won’t open that Pandora’s box here, but I will say that I am looking for plastic racks for a bird cage. The cheap-o racks are fine but I really hate the flimsy feel. I have plenty of those as is taking up space. I really like the sturdy feel of my Paulson and Chipco racks but I want a nice snug fit.

I'm a sucker - I have my CPCs in Matsui racks in 2x 600 chip bird cages. Double dust protection! Obviously the 39mm CPCs are not snug in Matsui racks though.

 

[liftapint]

It's been pretty darn quiet in here, regarding shipping notifications! Come on, we know CPC is busy pumping out chips. Who's getting them? Let's see 'em??

 

[JMC9389]

It's been pretty darn quiet in here, regarding shipping notifications! Come on, we know CPC is busy pumping out chips. Who's getting them? Let's see 'em??

Nothing on my end, sadly, hoping soon!

 

[Sprouty]

Where are the scrowns?!