Upcoming molds......... (18 Viewers)

David Spragg

Flush
Site Vendor
Joined
Mar 9, 2014
Messages
1,756
Reaction score
4,572
Location
UK
The order of the molds below is still to be finalised but as it looks right now with FDL & 44mm currently in progress......

Anyone with an H-mold order ready to go in the next 48 hours might just make it subject to clay availability. :)
HHR & CSQ I can only guarantee getting in if you get me orders within about 2 weeks (excluding anyone that has already contacted me)
DSQ & E&C will probably be the next in line after that. Anyone wanting to guarantee getting in then the cutoff is provisionally 6 weeks time.

Small & Large Crown. I am anticipating there will be sufficient demand to install these after the molds listed above. That would mean - very estimated :) - we could be looking at pressing starting late January. If it is a substantial run then I don't need to set the cutoff earlier than 12/31. However, if everyone places their orders on 12/29, 12/30, 12/31 that doesn't help us.
Currently only one customer has placed a definite order. I would appreciate if anyone who is planning to make this run can email me at sales@classicpokerchips.com with an idea of what they are doing just so I can keep some rough tally of the sort of numbers we are looking at.

Two things to remember...............
1. You don't need final artwork to place an order (although you DO need to pay). At the earliest I don't need art files for 2-4 weeks after the cutoff dates.
2. Any payments made before 12/31 safeguard you against the 2019 price increases even if you don't finalise the order until after 1/1.

For those that don't fully understand how/why dates can be variable... If for example 10 people place HHR or CSQ orders in the next two weeks then that will push back the other dates etc, etc.
 
Last edited:
So cirsqu will run in the next two weeks? Cool!

Where does it say that? It says I need paid orders within 2 weeks. Then allow the 4-6 weeks to make and assemble the parts, and then however long we are pressing for (which can vary from a week to 2 months depending on the volume of orders) :)
 
David will we know about the tri Moon by then or is that still to be determined?
 
I should say when the small and large crown mold go in?

By the time they go in I would say yes, but not sure if it will be too late for making parts. That said I do have 2 months to sort it. :)
 
Hi David, I was wondering if there was any updates on which molds you are currently running and which ones you're planning in the future. You said the dates can be variable, and I just wanted to know if your plans have solidified since you originally posted this. I'm very interested in placing an order before the end of the year.

Thanks for you time and happy holidays!
 
Hi David, I was wondering if there was any updates on which molds you are currently running and which ones you're planning in the future. You said the dates can be variable, and I just wanted to know if your plans have solidified since you originally posted this. I'm very interested in placing an order before the end of the year.

Thanks for you time and happy holidays!

It's slipped by a couple of weeks. A lot of last minute HHR's.
I'd still like to cutoff on the crowns mid Jan for production starting mid Feb.
FDL will be the next after that.
I could still squeeze in DSQ or E&C if anyone is ready to go now.
I have single orders for Cards & Dice & Scroll. If I get any more either of those could be the next after FDL.
 
It's slipped by a couple of weeks. A lot of last minute HHR's.
I'd still like to cutoff on the crowns mid Jan for production starting mid Feb.
FDL will be the next after that.
I could still squeeze in DSQ or E&C if anyone is ready to go now.
I have single orders for Cards & Dice & Scroll. If I get any more either of those could be the next after FDL.

Okay, I'll be submitting an order for the Large Crown mold. My artwork is halfway done, just need to work out the reverse inlay art. I will probably need help with that artwork.

I do have a question about the Large Crown and hot stamping. I originally wanted to hot stamp a fractional, but I remember reading you were still testing the Large Crown for hot stamping. Have you had any encouraging results? In your estimation, what are the chances of this becoming a reality? Again, thank you for your time and happy holidays!
 
Okay, I'll be submitting an order for the Large Crown mold. My artwork is halfway done, just need to work out the reverse inlay art. I will probably need help with that artwork.

I do have a question about the Large Crown and hot stamping. I originally wanted to hot stamp a fractional, but I remember reading you were still testing the Large Crown for hot stamping. Have you had any encouraging results? In your estimation, what are the chances of this becoming a reality? Again, thank you for your time and happy holidays!

I said that the testing will take place when the mold is installed for the first production run. Impossible to test it before then. If it works it will be available for the next run after that but that could be 6,9,12 months later.
 
I said that the testing will take place when the mold is installed for the first production run. Impossible to test it before then. If it works it will be available for the next run after that but that could be 6,9,12 months later.

Oh, I see. Thank you for the clearing that up for me. Cheers!
 
David, a while ago I read FDL is supposed to run around April or maybe a bit later. Is that still correct, and if yes, what's the order cutoff date?
 
David, a while ago I read FDL is supposed to run around April or maybe a bit later. Is that still correct, and if yes, what's the order cutoff date?

That's still about right at the moment. Provisional cut-off end of Feb.
 
  • Like
Reactions: Nex
Anyone with HHR sets receive shipping notices?

Not yet but I spoke with David just after new year's and he said they had started pressing them. There are a bunch of current orders on HHR.
 
Not yet but I spoke with David just after new year's and he said they had started pressing them. There are a bunch of current orders on HHR.
Should be anytime now just waiting to see them start rolling out!
 
HHR
FBD8B0D1-EC7F-41CF-BBD6-0035FC714685.jpeg
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account and join our community. It's easy!

Log in

Already have an account? Log in here.

Back
Top Bottom