TheDuke
Full House
Man, I really dig this.
View attachment 503457
I'd order a set with this mold design in a heartbeat.
Amazing!
Man, I really dig this.
View attachment 503457
There was an old trident done years ago, but there have been plenty of pitchforks here on PCF in modern times
Ceramics are very hard, and wear very slowly even with heavy non-stop casino usage. It takes years of casino use to wear down ceramics, and the dye-sub printed ink will wear off long before the base chip itself shows any significant wear, especially to a debossed image. They should easily hold up to decades of home use conditions.
Both would likely apply to debossed hybrids -- base chips randomly printed (in relation to the debossed images), and printed labels aligned with the printed elements as the defaults.
Like THC mold chips, the mold markings are usually not a dominate part of the 'look' unless the chips are solid colors. Once you start adding other design features and colors, the eye is typically pulled in other directionsI'm interested if the appeal changes with a relatively symmetrical and what to my mind is simple and clean design if the molds are not symmetrical.
I'm in, but only if it goes sideways.Unless this goes sideways, count me in.
Ya know... that could make a great story, if not a great chip...I'm in, but only if it goes sideways.
Original Four Suits logo, owned by @MoscowRadio who has made it public for everyone to use:
View attachment 503261
Mock-up of a printed ceramic version of the Four Suits logo on the rim, courtesy of @CdnBeerLover and @p5woody:
Abstract four suits logo courtesy of @RiffRaffRandy:
I don't think it would.Not to distract from the possible GB, but do you know if the free use by the original artists extends to the art done by @RiffRaffRandy who hasn't posted in 2 years?
Shoot me a drawing via PM.If the detail is possible maybe a tri-star? stars in a triangle array at each embossed.
Will the centers of the triangles be molded, or the outlines?
The lines would be debossed.Will the centers of the triangles be molded, or the outlines?
Then I’d probably make the lines slightly thicker, and make the distance from the edges of the “mold” to the edge of the recess and the edge of the chip equal, because it feels asymmetrical right now.The lines would be debossed.
Here is an old mock-up of the Four Suits logo as a custom polyclay mold:
View attachment 503279
And a mock-up as a custom polyclay mold with outer ring (which would be similar if making it a hybrid mold, with a slightly smaller recessed center):
And below are the existing 39mm polyclay designs produced by Sun-Fly -- I think the four suits logo and diamond image are similar in complexity. On a 43mm hybrid mold, the Four Suits logo would be larger than the diamond and cards images:
View attachment 503281
FYPSorry, but all I can visualize is these with labels. It’s like the poopingpenguinparrot Sorry
The crossed scimitars would look soooooo good on a set of Tangiers. Silo and two hay bales, anyone?