Custom Table Toppers (1 Viewer)

rjdev7

Flush
Site Vendor
Joined
Jul 22, 2015
Messages
2,324
Reaction score
5,362
Location
New York, NY
I'm really excited to announce that I'll be producing a number of custom table toppers for PCF in 2022, in rectangle and oval patterns initially. The oval pattern will be the same dimensions (73.75" x 31.5" x 5mm thick with sewn edges) as the Super Poker World table topper group buy that I ran in 2021, so that they'll fit perfectly in Barrington/ESPN tables. For me, I've found it really fun to swap out the table topper depending on the chip set "theme" that I'm playing with on a given night, which is what really inspired me to make more of these for the community.

The rectangle mats will be (74" x 32" x 5mm with sewn edges). I hope to be able to entertain custom size orders in the future, but it'll be a learning curve to figure out the logistics behind that.

So far I have four distinct designs that I'm really excited about, including Super Poker World (mentioned above). I plan to share those and more in the coming weeks to get some initial community feedback, and tailor future designs around interest. I hope to be able to start taking orders sometime in May-June if all goes according to plans.

Looking forward to getting this project going, and hearing some feedback on initial designs from all of you in the near future!
 

rjdev7

Flush
Site Vendor
Joined
Jul 22, 2015
Messages
2,324
Reaction score
5,362
Location
New York, NY
Interested to see the new designs. Considering something on the WSOP theme?
Not currently.

Could potentially do something with a WSOP vibe / look and feel, but wouldn't be able to have the exact name be WSOP due to trademark (much like I couldn't name the Super Poker World mats Super Mario Poker or something). I don't know how many folks would be interested in something WSOP-like with a different name.
 

mcguiles

3 of a Kind
Supporting Member
Joined
Apr 25, 2018
Messages
503
Reaction score
406
Location
Denver, CO
i have a large table that i’ve always want to have covered. im out of town and don’t have the measurements but it’s maybe 8 or 9’ long
 

DeusEx

Flush
Supporting Member
Joined
May 11, 2021
Messages
2,310
Reaction score
2,964
Location
Indy
I love just about every movie except one by Guy Ritchie. The scene from Lock Stock and 2 smoking barrels where they are playing poker in the boxing ring, and the music and the camera movement / angles like being drunk, I always thought the symbolism of a boxing ring was soo good for a poker game.
 

rjdev7

Flush
Site Vendor
Joined
Jul 22, 2015
Messages
2,324
Reaction score
5,362
Location
New York, NY
Love the ideas. Thanks for sharing! I'll start a backlog and think about how we can keep the most sought after ones towards the top of the list (e.g. some upvoting or polling system)

Definitely had intended to do a Jacks themed one at some point.

I'm finalizing my fourth design this weekend and will then share the first four that I have to see what people think about them. Unfortunately these take a decent amount of time to design with my rudimentary (but quickly approaching mediocre!) design skillz.

-Ryan
 

RedRider52

Pair
Joined
Jun 27, 2021
Messages
224
Reaction score
162
Location
Dallas
I too could be interest in a larger size. Dining room tables are bigger, certainly wider, than poker tables it seems.
 

rjdev7

Flush
Site Vendor
Joined
Jul 22, 2015
Messages
2,324
Reaction score
5,362
Location
New York, NY
Someone measure their dining room table and give me a number lol

I'll see what can be done :)
 

inapinch

Straight
Supporting Member
Joined
Dec 27, 2021
Messages
785
Reaction score
1,359
Location
Colorado
i have a large table that i’ve always want to have covered. im out of town and don’t have the measurements but it’s maybe 8 or 9’ long
I'd love to tag along here as well. I have a 90" table that I could use a topper for.
 
Last edited:

aggie

Flush
Supporting Member
Joined
Jan 6, 2021
Messages
1,627
Reaction score
6,028
Location
SATX
82” x 38” and a solid, simple design and I would pay $$.
 

inapinch

Straight
Supporting Member
Joined
Dec 27, 2021
Messages
785
Reaction score
1,359
Location
Colorado
update - I'd take 1 of the regular sizes above, as well as another one that's 90" x 35" if that's possible (give or take couple inches). I'd like to buy both the regular and custom size together, but we'll see how things go. Thank you!

Edit: oval for regular, rectangle for custom size
 
Last edited:

rjdev7

Flush
Site Vendor
Joined
Jul 22, 2015
Messages
2,324
Reaction score
5,362
Location
New York, NY
No guarantees on these sizes, but I’ll see what I can do.

Assuming these are all rectangle? Or oval?
 

RedRider52

Pair
Joined
Jun 27, 2021
Messages
224
Reaction score
162
Location
Dallas
I could go as big as 90” and at least 38”, if not several inches wider. Anything a size up from 70 x 35 in a rectangle is a win though. Poker tables are better as a racetrack, but I don’t know how many dining tables are out there are an oval shape. I guess it depends on how one will use the topper.
 

Littleluck55

Flush
Supporting Member
Joined
Aug 3, 2019
Messages
1,081
Reaction score
2,006
Location
Kentucky
I think one design of interest is some type of bourbon theme. Many people are bourbon collectors and many have some type of bourbon/drinking themed chips. I would think a basic bourbon/drinking themed topper would be a hit.
 

Eaglefang

Sitting Out
Joined
Feb 4, 2022
Messages
41
Reaction score
33
Location
Florida
How about considering a rectangular size 70L X 30W. That would fit the popular lifetime folding tables. Budget friendly.
 

rjdev7

Flush
Site Vendor
Joined
Jul 22, 2015
Messages
2,324
Reaction score
5,362
Location
New York, NY
I'll see what sizes I can offer at first. I think if I do offer custom sizes I'm going to likely have to post some interest threads first, so I can ensure I have somewhat accurate quantities in-demand at various sizes. Thanks for the additional feedback!
 

Marius L

Full House
Supporting Member
Joined
Oct 23, 2015
Messages
4,737
Reaction score
7,379
Location
Oslo, Norway
Rectangular and same size as the pcf topper would be nice, but with a clean, simple design without a specific theme. Something generic.
 
Last edited:

rjdev7

Flush
Site Vendor
Joined
Jul 22, 2015
Messages
2,324
Reaction score
5,362
Location
New York, NY
Everything I'm working on right now are themed, but I do intend to work on something more generic as well. I hope to be able to share some designs for feedback in the next couple of weeks, likely in a separate thread. Thanks!
 

upNdown

Royal Flush
Joined
Aug 8, 2016
Messages
17,502
Reaction score
26,465
Location
boston
Rectangular and same size as the pcf topper would be nice, bit with a clean, simple design without a specific theme. Something generic.
Right. If I were ever to buy a mat like this, to have as an extra table, it would be a generic, unthemed design.
I’m not sure if you’re looking to start a business or to fill a niche, or what. But this project is interesting to me because there aren’t any mats of this thickness available - if I go to Amazon looking for a generic mat, all I can find is 2 or 3 mm.
 

TonZaga

Two Pair
Joined
Jun 23, 2019
Messages
393
Reaction score
437
Location
Louisville, KY
Saw the pictures in the Barrington mod thread and was wondering if the topper was under the armrest or just super snug against the edge? Looking to probably get a custom one for mine in the future
 

rjdev7

Flush
Site Vendor
Joined
Jul 22, 2015
Messages
2,324
Reaction score
5,362
Location
New York, NY
Saw the pictures in the Barrington mod thread and was wondering if the topper was under the armrest or just super snug against the edge? Looking to probably get a custom one for mine in the future
It’s snug against the edge
B6EB1DCB-159B-4360-8191-02BBA79693F9.jpeg
 

TheBigTater

4 of a Kind
Supporting Member
Joined
Nov 5, 2014
Messages
6,173
Reaction score
10,457
Location
Deep In The Bible Belt
Everything I'm working on right now are themed, but I do intend to work on something more generic as well. I hope to be able to share some designs for feedback in the next couple of weeks, likely in a separate thread. Thanks!

Very interested in oval (Barrington size) with a more generic (non themed) design. :)
 

TheMadIrishman

Sitting Out
Joined
Jul 15, 2021
Messages
21
Reaction score
10
Location
Springdale, AR
Would I be the only one who would be interested in a blackjack topper mat that would fit my folding Texas Hold 'Em table? I think it's 60"x35" on the felt. I'd love to have that and a matching Hold 'Em mat in an old school classic Vegas theme. The Rat Pack, jet age, nuclear bombshell babes, cars with fins, old Freemont and Welcome to Fabulous Las Vegas sign. I love The King, but pre-Elvis era Vegas.

Anyone?
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account and join our community. It's easy!

Log in

Already have an account? Log in here.

Top Bottom