Vendor Sale Made-to-order Custom Table Toppers (11 Viewers)

rjdev7

Full House
Site Vendor
Joined
Jul 22, 2015
Messages
2,706
Reaction score
8,284
Location
Scarsdale, NY
I'm excited to announce a partnership with a new vendor who will be able to supply made-to-order table toppers to the US and Europe.

All existing stock designs and sizes (including those compatible with the Barrington / ESPN oval tables) that have been previously offered are available, and will arrive within a time period of approximately 3-4 weeks from the time of purchase.

These can be ordered in any shape or size up to a max length of 114” and a max width of 48".

A few considerations:
  1. Thickness: The thickness of these toppers is 2mm.
    If you're using these directly on a dining table, it is advised to get some closed cell foam or other method of padding (read through the thread for examples of what folks have used successfully) to put under the toppers.
    Possible Solution: "Blank" toppers (empty / no print) can be purchased as the same size as your topper for 30% discount. This would allow you to use it as padding underneath your topper if you feel 2mm is not thick enough. You could also buy two printed toppers and put one under the other.
  2. Quality: The print quality and quality control (e.g. dimension accuracy to 1/2") are better than the vendor I was using in China for the bulk orders. The colors are very vibrant, with little bleed, and the dimensions are more precise.
  3. Sewn Edges: It's possible to have sewn edges for a small added fee. Take this for what it's worth, but if you're using these toppers to fit within an existing table like a Barrington, an ESPN table, or some other existing table, I would recommend NOT doing edge stitching as the look is much cleaner than having the edges showing around the inside of the rails on the table
  4. Shape: There's no restriction on shapes. For instance, you can do round / circle toppers, rectangle toppers, octagon, ellipse, oval toppers, etc.
  5. Size: The new vendor supports any topper up to a maximum length of 114" and maximum width of 48"
  6. Price
    Un-sewn Edges: $125 shipped for standard sizes**
    Sewn Edges: $135 shipped for standard sizes**
    ** Size Premium: There will be a $2.50 per square foot premium for toppers that exceed the standard Barrington dimensions (73.5 x 31.5) which I will calculate at the time of order.
    Custom Art: Custom designs will come at a $10-50 premium depending on the extent of customization required. Payment for the topper + custom designs will be required before designs take place. If there is a change of heart and you do not look to purchase the topper after seeing the designs, I will refund you the amount minus my design fee.
    Here is a
    blank template in Adobe Illustrator if anyone would like to design your own art and send to me.
To place an order, please PM me with the description of the design & the dimensions of the topper you would like.

If you have questions, feel free to respond here so my answers are seen by all. Thank you!

Here’s a video showing how well cards slide on the toppers:
 
Last edited:
Super excited for this!

I'll likely be taking your recommendation and buying multiples to stack on top of each other, but then also have the ability to host extra tables or just switch up what topper I'm using.

Do you have an AI template or something we can use if we want to submit custom artwork?
 
Just brainstorming... and I definitely would if something like this was designed.
Dunes Hotel Casino.jpg
 
Yes, I can provide a template! Will update the OP once I have something ready.
It would also be awesome if the template included some of the more generic patterns to use already like the speed-cloth-ish pattern
 
Full size table options? 96x42 (might be 44 wide I'll have to measure). How do you think it would do over a dealer tray?
 
Full size table options? 96x42 (might be 44 wide I'll have to measure). How do you think it would do over a dealer tray?
Custom sizes are ok, but I'm not sure if there's a max size that they can do. Let me follow-up and respond here with an answer once I hear back.
 
Do we have to stick to the oval? I have a BBO Helmsley that I’d love to coordinate with my barrington
 
I’m interested in a custom size to fit my table. Guess you just need dimensions? Is there a markup for custom?
Yeah just PM me the details and what you want. No upcharge for custom size, only for unique custom design.
 
Any info on the feel and glide on these? Custom sizes is awesome. I can change felts like I do sets now
That’s how I do it. I match the felt to the chipset. I love it. My wife is still coming around to losing half of a closet but it’s fiiiine.

Someone else who’s bought toppers from me should probably weigh in, bc I’m sure I’m coming off as biased, but the feel is great. The cards slide easily and there’s enough padding to make picking cards up easy. I’ll post a video later.
 
Super excited for this!

I'll likely be taking your recommendation and buying multiples to stack on top of each other, but then also have the ability to host extra tables or just switch up what topper I'm using.

Do you have an AI template or something we can use if we want to submit custom artwork?
I've uploaded a template to the OP: https://drive.google.com/file/d/1EjpmpoUdPuBu1fLKfumHei2boH0kuhGL/view?usp=share_link

I can add some of the generic backgrounds (e.g. suits grid) very easily but this gives you a sense for the dimensions.
 
I’m on an ipad and the spreadsheet is giving me fits. Do you have a smaller rectangle size similar to the smaller PCF topper? And a mouse pad size?
 
I’m on an ipad and the spreadsheet is giving me fits. Do you have a smaller rectangle size similar to the smaller PCF topper? And a mouse pad size?
I don’t, but it’s something we could look into.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account and join our community. It's easy!

Log in

Already have an account? Log in here.

Back
Top Bottom