Sale Sparkynutz Storage Solutions and 3d printing (1 Viewer)

[Sparkynutz]

Spring Sale! Ends June 9th 2024
All current inventory buy any 3 items get the 4th item of equal or lesser value free. (ceramics not included)

New Item Flattening Rack
Made from PETG plastic for higher temp resistance allows short contact with 225-250* chips without warping rack while clamping.

3943 $6 and 3943-11 $9.50 includes 11x 43mm blank ceramics.

80mm dealer button storage
8005-2L Available in Red, Blue lighted $140
Unlighted and any color outer box $125


Some examples of items offered and what they look like.
Much more inventory on hand than pictured here.

Current Price List as of 4-19-24
To place order PM this info please-
1. Requested part number(s)
2. Color or other requested features
3. What specific chips will be used with each product to verify fit due to varying thickness and diameters.
4. Name and shipping address

If you'd like to leave feedback please post in this thread for that ability.
Shipping prices TBD after order submitted.

Item​	Model​	Price​
39mm 10 stack​	3910​	$5​
39mm 12 stack​	3912​	$6​
39mm 15 stack​	3915​	$8​
39mm 20 stack​	3920​	$10​
39mm twin 10 stack​	3910-2​	$10​
39mm triple 10 stack​	3910-3​	$15​
39mm quad 10 stack​	3910-4​	$20​
39mm twin 20 stack​	3920-2​	$20​
43mm 10 stack​	4310​	$5​
43mm 12 stack​	4312​	$6​
43mm 15 stack​	4315​	$8​
43mm 20 stack​	4320​	$10​
43mm twin 10 stack​	4310-2​	$12​
43mm triple 10 stack​	4310-3​	$20​
43mm quad 10 stack​	4310-4​	$25​
43mm twin 20 stack​	4320-2​	$25​
47mm 10 stack​	4710​	$6​
47mm twin 10 stack​	4710-2​	$12​
47mm triple 10 stack​	4710-3​	$18​
47mm quad 10 stack​	4710-4​	$25​
49mm 5 stack​	4905​	$6​
49mm 10 stack​	4910​	$8​
49mm x5 single slot​	4905-1​	$10​
49mm x10 single slot​	4910-1​	$18​
49mm x15 single slot​	4915-1​	$25​
49mm x20 single slot​	4920-1​	$30​
60mm 5 stack​	6005​	$7​
60mm 10 stack​	6010​	$10​
60mm twin 10 stack​	6010-2​	$20​
60mm x5 single slot​	6005-1​	$10​
60mm x6 single slot​	6006-1​	$12​
60mm x10 single slot​	6010-1​	$20​
60mm twin x10 single slot​	6010-1x2​	$35​
60mm x15 single slot​	6015-1​	$25​
60mm x20 single slot​	6020-1​	$35​
60mm x75 single slot in a wooden box​	60-175​	$140​
65mm x5 single slot​	6505-1​	$50​
65mm twin row 5 single slot​	6505-2​	$95​
65mm x12 single slot (wood box)​	6512-1​	$90​
80mm x5 single slot​	8005-1​	$65​
80mm twin row 5 single slot​	8005-2​	$125​
80mm twin row 5 single slot USB Lighted​	8005-2L​	$140​
80mm x12 single slot (wood box)​	8012-1​	$115​
39-39.5mm Sparky Stacker Pair​	39100​	$30​
39.5-40mm Sparky Stacker Pair​	40100​	$30​
43mm Sparky Stacker Pair​	43100​	$35​
Triple Stacker X-Tall Pair​	39108​	$25​
Triple Stacker X-Tall Pair​	40108​	$25​
Card Tray​	52-2​	$30​
USB LED Card Tray​	208​	$65​
Cut Card storage w/lid P=poker, B=Bridge	50-P or 50-B	$20
Gold Coin Seating Chips​	$​	.50​
Chip Flattening Rack (fits 10x 39mm chips plus 11x 43mm ceramics)​	3943​	$6​
Chip Flattening Rack Kit includes 11x 43mm ceramics​	3943-11​	$9.50​

Every item above available in any color except noted (wood box)
I most likely have it.
Custom printing figures, trays etc ~ $5.00 per Print hour
Custom Design work $20 per hour
Shipping from zip 53963 TBD​

FYI Part# 40100 (39.5-40mm) Sparky stackers are required for Emerald Bay and many other chips larger in diameter.

See here for some info on chip diameters-
https://www.pokerchipforum.com/threads/poker-chip-size-variance.112702/

 

[GreekRedEye]

I have never been to this corner of PCF before. So glad you are offering these 3d printed products.

I own a set of racker stackers and I love them. Well done. Work perfectly. I recommend to anyone considering.

I am considering the 8012-1...I will wait till I receive my new dealer buttons from Justin's group buy to decide.

the 208 light up? Is that what LED means? Would love to see a pic with it lit up if that is the case.

 

[DontKnowWhen]

Would love one of the 8012-1 racks.
Not sure if this is a sales or dibs thread or what so if I’m out of line please forgive.

 

[Sparkynutz]

I have never been to this corner of PCF before. So glad you are offering these 3d printed products.

I own a set of racker stackers and I love them. Well done. Work perfectly. I recommend to anyone considering.

I am considering the 8012-1...I will wait till I receive my new dealer buttons from Justin's group buy to decide.

the 208 light up? Is that what LED means? Would love to see a pic with it lit up if that is the case.

usb powered led light.

There should be a few new versions for acrylic dbs soon as well that I'm working on.

 

[Sparkynutz]

Would love one of the 8012-1 racks.
Not sure if this is a sales or dibs thread or what so if I’m out of line please forgive.

I'm new to this. Hoping it's similar to classified section where a post is needed in order to leave feedback.
Rest of details via pm.
I should have a few done with pics added to this listing later in the week.

 

[harrysallout]

I'll take one of these.

39-39.5mm Sparky Stacker Pair

39100

$30

 

[harrysallout]

And one of these too.

39mm 12 stack

3912

$6

 

[Sparkynutz]

 

[London24]

I’ll take a 39100 when available.

Any plans for chip flattening racks?

 

[Sparkynutz]

I’ll take a 39100 when available.

Any plans for chip flattening racks?

Not at this time. Possibly in the future tho.

 

[Sparkynutz]

2 new items added

 

[Bacon Dad]

Have you devised anything that holds a deck of cards in compression?

You could call it the Kem-Kompressor.
Or the Kempressor.
All naming rights reserved in perpetuity. Available for use for a small fee.

 

[Sparkynutz]

Have you devised anything that holds a deck of cards in compression?

You could call it the Kem-Kompressor.
Or the Kempressor.
All naming rights reserved in perpetuity. Available for use for a small fee.

Nope.
To flatten?

 

[MrRossKeys]

Put me down for 1x 8012-1. Is that the correct size for 3.18 inch acrylic dealer buttons?

 

[Sparkynutz]

Put me down for 1x 8012-1. Is that the correct size for 3.18 inch acrylic dealer buttons?

80mm yes.
Slight delay on the boxes for those but hoping to have a few done soon.

 

[twocannons]

Have you devised anything that holds a deck of cards in compression?

You could call it the Kem-Kompressor.
Or the Kempressor.
All naming rights reserved in perpetuity. Available for use for a small fee.

I would take one of those! Kem cards are my fav

 

[Sparkynutz]

I would take one of those! Kem cards are my fav

Hmm. Willing to try.
Any suggestions on design?

 

[Bacon Dad]

Hmm. Willing to try.
Any suggestions on design?

I’m my mind I was picturing a card well with a hinged lid with a catch-type closure. You close the lid and can press the top down to apply pressure to the cards inside the well. So the lid fits inside the well. I attached a crude drawing.

 

[Bacon Dad]

If the hinge is a problem, use a slot and tab on the back of the lid to hold the back of the lid down. Multiple slots to adjust for amount of pressure and thickness of deck. Filler cards can be used to fill the gap if there is one.

 

[twocannons]

What if it had like slots/rails on the side and you could slide the top in at multi able depths? Kinda like this box

 

[Bacon Dad]

What if it had like slots/rails on the side and you could slide the top in at multi able depths? Kinda like this box

You might push the top card backwards and crinkle it up.

 

[Sparkynutz]

This is for one deck only?
Getting decks in and out may be a challenge or keeping them lined up.

In my head I picture a regular card rack extra deep then a top with that protrudes exactly where the cards are and a few wing nuts around outside to tighten to desired pressure.

 

[Bacon Dad]

I was thinking one deck per device.

In my head I picture a regular card rack extra deep then a top with that protrudes exactly where the cards are and a few wing nuts around outside to tighten to desired pressure.

This sounds like a good way too.

 

[Sparkynutz]

I was thinking one deck per device.

This sounds like a good way too.

This is what I came up with.
May need inserts to overbend. Maybe different amounts of curve depending how bowed the cards are?

Bolts and wing nuts could be used or just embedded nuts and whichever type of screw is preferred. I modeled for 1/4-20 nuts and Philips head machine screws since that's what I had handy.
10-32 or a metric size could be used for final design if preferred.

Thoughts?

Inventory pic also updated.
43mm Sparky Stackers now available.
43mm, 40mm, 39mm

 

[Sparkynutz]

Spring Sale going on now!

 

[MrRossKeys]

Put me down for 1x 8012-1. Is that the correct size for 3.18 inch acrylic dealer buttons?

I would also like a stacker for 43mm chips... 5 stacks of 20. Which product ID is that?

 

[ekricket]

I was thinking one deck per device.

This sounds like a good way too.

Or you could just buy this one. Playing card presses have been around since the 1800’s

 

[ekricket]

There is also a wooden version

 

[Sparkynutz]

There is also a wooden version

View attachment 1293598

Guess no reason for me to reinvent the wheel. Thanks @ekricket

 

[grandmeme]

I'll take one of these when available. I'd assume these'll fit ASM/Paulson chips just fine?

39-39.5mm Sparky Stacker Pair

39100

$30