Post mockups for fun/science? (16 Viewers)

[WedgeRock]

But the Bellagio says "Ten Dollars" twice.

Yours says "$5 Dollars"

 

[Kid_Eastwood]

View attachment 1594585

The design is very nice and original but in not so good lighting conditions, it could lead to issues with colors.

At home, I used to have a solid set and from the other side of the table, a chocolate chip could go unnoticed in a purple stack.

With this design, I'd add more contrast (not on a same chip but between different chips).

Just my 2 cents.

 

[SeanGecko]

 

[Jeff]

@SeanGecko Is it supposed to be hardwell or handwell? Type sorta looks like handwell?

 

[chipinla]

@SeanGecko Is it supposed to be hardwell or handwell? Type sorta looks like handwell?

 

[SeanGecko]

@SeanGecko Is it supposed to be hardwell or handwell? Type sorta looks like handwell?

Ohhh good eye. The N has two humps but it could look more like an upper case N but small. Now I am going to be looking at it annoyed unitl I get it fixed.

 

[MD Mike]

I’ve been doing my cursive Z wrong for four decades.

 

[cpac54]

I’ve been doing my cursive Z wrong for four decades.

I've honestly never seen a cursive z written that way. To me it's missing the bottom loop - that's how we were taught way back when, at least.

 

[SeanGecko]

Got it fixed

 

[that_guy]

Hey guys, not sure if this is kosher for this sub-forum or not, but I thought it would be fun to post any random sets you have in your design tool that you think are good enough to share with the world... I'm sure you all have a few

If we contained them to this (or a weekly/monthly thread or something) it wouldn't clutter up the rest of the board, and it might help others come up with ideas for their own sets.

Anyway, this is just something I threw together and have no real intentions of turning into a set, just wanted to see how you guys would improve it. I think I was repressing all my dayglo desire while thinking about the Mayfair set... so this set is pretty bright and busy...

First impressions are maybe too much blue/purp-ish

View attachment 21016

I really like the look of yellow and peach!!

View attachment 21047

Your blue and dayglo chip really pops. I’m a fan!

 

[DrunkleWade]

Toying around with a Golden Nugget inspired Tina limit set.

Calling it Sainte Claire (in French because it’s fancy ) for the new St. Clair apartment building I’m moving into next year.

Am I fairly close on the colours?

 

[danopoker]

I've honestly never seen a cursive z written that way. To me it's missing the bottom loop - that's how we were taught way back when, at least.

View attachment 1595632

Pretty sure the image from SeanGecko is cropped at the bottom -- look at the 'y' right next to it, no descenders.

 

[beaver]

I've been having a blast playing around with @QuietMaple Chipmatic Studio. Its incredible how easy it is to throw together mockups on this tool. Dreaming of a tournament set one day...

 

[tommytwoguns]

Here's my first stab at any of this. Very neat tool that QuietMaple put together. Thinking about a Tina set once I get this fleshed out better.

 

[MC_CPA]

Was killing time the other day and did my best to import the tiger colors over, for fun.

My question is do I have any other spot or color options for the $5k? I want to make it look like the Primary $2. I also want to make a T25k in blue, what options do I have available?

For what its worth I think they would cost the same if not more than the actual tiger chips.

 

[ApeRice]

Hello everyone! I could use some advice on a mockup I have at the moment. On the $1 chip for this design idea that I have, I would like to keep the base color white, but also have the middle color in the spot pattern be a lighter shade of white so that it stands out against the chip. I am assuming that this is wishful thinking, but does anyone have experience with trying something similar with Tina chips and if it can be done successfully? If it helps, I have enabled soft proofing on Chipmatic, and here's a link to the gallery.

https://chipmaticstudio.com/share/uNCvlvJnARBoptVPCDlg7

 

[QuietMaple]

Hello everyone! I could use some advice on a mockup I have at the moment. On the $1 chip for this design idea that I have, I would like to keep the base color white, but also have the middle color in the spot pattern be a lighter shade of white so that it stands out against the chip. I am assuming that this is wishful thinking, but does anyone have experience with trying something similar with Tina chips and if it can be done successfully? If it helps, I have enabled soft proofing on Chipmatic, and here's a link to the gallery.

https://chipmaticstudio.com/share/uNCvlvJnARBoptVPCDlg7

Definitely can't say for sure if that white will stand out, even with the soft proofing. But I think even if it doesn't stand out, it would still look like a nice chip. You could also consider making the chip base color like a really light shade of blue or more of a tan/beige. That might make it stand out a bit more.
https://chipmaticstudio.com/share/vjr569I2hGDlmYEUWIbFX

(I really like your $25 chip, btw)

 

[DrunkleWade]

A couple of weeks ago @BKisback put out a call for a Monopoly chip designer and that sent me down a path to create my own chips.

I think this is the final product but I'm open to any critiques. I'll be putting these on the Tina textured no molds.

Reference paper money from my set. The photo doesn’t reflect the actual colours very well so colour matching has been a bit of a challenge.

Colours have been brightened up / saturated a little for better chip differentiation.

 

[GamingWithChips]

I think this is the final product but I'm open to any critiques. I'll be putting these on the Tina textured no molds.

Looks amazing!

I haven't played monopoly in a while so I don't remember how large "stacks" get, but I love when edges that have denoms have alternating right side up and upside down denoms so that chips will always have a rightside up edge.

 

[DrunkleWade]

Looks amazing!

I haven't played monopoly in a while so I don't remember how large "stacks" get, but I love when edges that have denoms have alternating right side up and upside down denoms so that chips will always have a rightside up edge.

Yep, good call. I was thinking about doing that but was on the fence. I’ll update.

 

[chipinla]

A couple of weeks ago @BKisback put out a call for a Monopoly chip designer and that sent me down a path to create my own chips.

I think this is the final product but I'm open to any critiques. I'll be putting these on the Tina textured no molds.

Reference paper money from my set. The photo doesn’t reflect the actual colours very well so colour matching has been a bit of a challenge.

View attachment 1625686

Colours have been brightened up / saturated a little for better chip differentiation.

View attachment 1625702

Short Line isn’t real so had to make it up with the next best thing.

 

[DrunkleWade]

I'm not sure whether to go with a "mustard" or "peach" 100. Any thoughts gamers? It's a very subtle difference. Pretty happy with the rest of the colours.

 

[Cratty]

Mustard, would be concerned with peach coming out too close to the $5 (especially with pink spectrum colors printing more magenta than provided CMYKs).

 

[Smokey]

My first attempt designing chip set I kinda like it.

 

[Himewad]

My first attempt designing chip set I kinda like it. View attachment 1627717

I would lose the wood background and make the "maverick card club" a rustic brown color instead. You will see everything much more clearly if you do that.
Love the longhorn.

 

[Smokey]

I would lose the wood background and make the "maverick card club" a rustic brown color instead. You will see everything much more clearly if you do that.
Love the longhorn.

Thank you for the feedback. It looked a lot better before i had to shrink it down to fit the chip LOL Any suggestions for a background color? I don’t know if i could just get rid if it and it just be the color of the chip

 

[chipinla]

My first attempt designing chip set I kinda like it. View attachment 1627717

I personally think the colors are too flashy for this theme. Seems like it should feel more old school. And agree with @Himewad I would lose the background. I would make the background a weathered off white to give it an aged feel. Something like this.

 

[Smokey]

I personally think the colors are too flashy for this theme. Seems like it should feel more old school. And agree with @Himewad I would lose the background. I would make the background a weathered off white to give it an aged feel. Something like this.
View attachment 1627738

I guess that looks ok. Fine man show me up like that lol. Jk i do like that background i didnt even think about that. That looks good man. Thanks for the guidance it is much appreciated.

 

[Gunnar]

My first attempt designing chip set I kinda like it. View attachment 1627717

That hundo is sick!

 

[dizzyChipper]

Do sticker mule samples count as a mock up?