I'm sure they're fine. It's just a personal preference.
-
PCF is an eBay Partner. If you make a purchase through one of our links, we may earn a commission at no extra cost to you. Thank you for your support!
Sun-Fly Mountain Top Casino GB interest? (13 Viewers)
- Thread starter p5woody
- Start date
- Status
seyff45
Two Pair
I love the feel of these chips... i just like the smaller size for a cash set.
love the idea of 1, 5, 25 small and then 100 at 43mm.
That's what my buddy has on his boardwalk cash set.
love the idea of 1, 5, 25 small and then 100 at 43mm.
That's what my buddy has on his boardwalk cash set.
Seriously, ^this^. I had similar misgivings about an all-oversize set, until I actually handled the 43mm/25mm label hybrids from Sun-Fly. At 10g, they are near-perfect weight, and just don't feel over-sized or odd to handle or shuffle, unlike heavier Paulson 43mm chips. And unfortunately, the smalller 39mm hybrids just seem lightweight and unsubstantial, especially in comparison to the 43mm hybrids or even to standard 39mm solid ceramics.
Throw in the low price point when purchased as part of a group buy, and I think the 43mm hybrids are the best value on the chip market, and easily the best non-clay chip available, period. I have three different sets already, and am going to find it hard to turn down geting in on this one, as well.
seyff45
Two Pair
Tourney set we use is mostly 43mm... I guess I just never really thought of 43mm singles or 5s...
Lemonzest
4 of a Kind
1,20, and 100 chip are the absolute stone cold nuts.
I don't like the look of the 25c chip. Brown seems bland to me...but I could change my mind after seeing samples.
Also as a micro player I would like to see a 10c chip too. If you added a 10c chip I would be in for a playable cash set.
I don't like the look of the 25c chip. Brown seems bland to me...but I could change my mind after seeing samples.
Also as a micro player I would like to see a 10c chip too. If you added a 10c chip I would be in for a playable cash set.
Already have a couple of 43mm hybrid tournament sets. Very tempted to take the 6D18 tournament chips and make a 43mm cash set out of them -or- a mixture of both sets for a 43mm cash set. 
FDLmold
Royal Flush
That's what she said!
RichMahogany
Straight Flush
Like the design a lot. Think they’re looking good but have already committed to other 44mm hybrids. None for me at this time.
bsdunbar1
4 of a Kind
I agree with this, remove them from the tournament chips
hdgeno
Full House
I’d be very interested in a small set off these, very interested. Love the colours and the inlays
Likely in for at least a heads-up set.
sorry, im not sure, where is cd?
OP
OP
If the GB moves forward it will be hosted here, no need to worry about CD it is just another forum.
ok, i would be in for a 600 cash set
The two stock 39mm Sun-Fly hybrid offerings are made on the two different 39mm Polyinno blanks -- the Violet Dawning chips use the HB002 blank with the larger 28.5mm recess, and the Ascona uses the HB001 blank with the smaller 25.4mm recess (same as the 39mm versions of the AC Boardwalk, Tangiers, Havana Room, and Mayfair Club chips).
I don't think there are currently plans to produce the Mountain Top chips in 39mm. But if so, I suspect they would use the HB001 blank with smaller recess.
slisk250
Straight Flush
I'd likely be in for blanks using the chips below (sleeves of 25 I presume?) 200/250/250/225/200/100
I see where you're going with that Mike. I swear, I love every chip set you put together. Yum.
Yep, if blanks are OK, I'm in for a set too. -- not because I don't love the inlay -- I do LOVE it. But I want to mix and match denoms.
When Sal ran the OWPS group buy, he was able to mix/match any label with any chip style (that was one of the available options). I'm not sure what the situation was, but it seemed like labels weren't an issue in regards to QTY. Not sure if Woody is able to do the same on this one, but it might be an option.
That would be very cool!
OP
OP
I have questions into Sun-Fly, nothing is set in stone yet. I know blank chips are an option, but checking to see if we can mix and match labels. I am also hoping to offer with and without the $. At this time I was not planning on offering 39mm option. Since they are different chips, I am assuming we would have to hit 5000 to get the discount on those. If 39 mm is really desired and we have the demand, I suggest we do a 2nd GB after this one is done.
For mix and match labels, I can only think of two ways:
Option 1 – Place each order as requested. Would need to work with Sun-fly if we would need to combine similar orders or if we could give them a spreadsheet with the details for each order. I think this option would be a pain in the ass for Sun-Fly and the shipper. Here is a sample order where they are using the $5000 chip as their quarter and a standard order no changes.
Order 1
Orange/Black/yellow chip - 25¢ label - 200
Blue/White chip - $1 label - 200
Red/orange/darkred chip - $5 - 200
Yellow/green/orange chip - $20 - 100
Option 2 – Place an order for inlay chips as is or blank chips and a label. (labels would need to be applied for only non-standard chips once they are received). So a sample order would look like this, where somebody is using the $5000 chip as their 25¢ chip and standard order no changes.
Order 1
labelled chips:
$1 chip - 200
$5 chip - 200
$20 chip - 100
Blank chips
Orange/Black/yellow chip - 200
Labels:
25¢ - 400
My thought is option 2 would be the easiest to coordinate and less chance of error, Thoughts? I have this question out to Sun-Fly to see what options we have.
For mix and match labels, I can only think of two ways:
Option 1 – Place each order as requested. Would need to work with Sun-fly if we would need to combine similar orders or if we could give them a spreadsheet with the details for each order. I think this option would be a pain in the ass for Sun-Fly and the shipper. Here is a sample order where they are using the $5000 chip as their quarter and a standard order no changes.
Order 1
Orange/Black/yellow chip - 25¢ label - 200
Blue/White chip - $1 label - 200
Red/orange/darkred chip - $5 - 200
Yellow/green/orange chip - $20 - 100
Order 2
Brown/Black chip - 25¢ label - 200
Blue/White chip - $1 label - 200
Red/orange/darkred chip - $5 - 200
Yellow/green/orange chip - $20 - 100
Brown/Black chip - 25¢ label - 200
Blue/White chip - $1 label - 200
Red/orange/darkred chip - $5 - 200
Yellow/green/orange chip - $20 - 100
Option 2 – Place an order for inlay chips as is or blank chips and a label. (labels would need to be applied for only non-standard chips once they are received). So a sample order would look like this, where somebody is using the $5000 chip as their 25¢ chip and standard order no changes.
Order 1
labelled chips:
$1 chip - 200
$5 chip - 200
$20 chip - 100
Blank chips
Orange/Black/yellow chip - 200
Labels:
25¢ - 400
Order 2
labelled chips:
25¢ chip - 200
$1 chip - 200
$5 chip - 200
$20 chip - 100
labelled chips:
25¢ chip - 200
$1 chip - 200
$5 chip - 200
$20 chip - 100
My thought is option 2 would be the easiest to coordinate and less chance of error, Thoughts? I have this question out to Sun-Fly to see what options we have.
Last edited:
brains613
Flush
I'm probably in for 600 or so.
pokerpig
Flush
Dammit!
I don't have a 43mm set and I don't have a hybrid set, and as I always liked the sound and feel of my Ascona 39mm hybrids sample set, this GB would be VERY tempting 
I love the colors and spots and the inlay design, but regarding the 25c chip I have to agree. Especially as all the other denoms are very colorful, such a brown chip looks bland and doesn't fit the rest of the set very well. Did you consider pink as an alternative? Pink would also go together very well with the white 5c chip and the blue $1 chip.
I love the colors and spots and the inlay design, but regarding the 25c chip I have to agree. Especially as all the other denoms are very colorful, such a brown chip looks bland and doesn't fit the rest of the set very well. Did you consider pink as an alternative? Pink would also go together very well with the white 5c chip and the blue $1 chip.
ParrotheadMZ
Flush
I'd likely be in for 500-600 blanks.
Great inlays though, just would want to customize them.
If you did 39mm I'd consider a cash set as well.
Great inlays though, just would want to customize them.
If you did 39mm I'd consider a cash set as well.
OP
OP
A couple of updates:
Looks like we will be able to offer option 2. Right now it looks like I am going to offer labels with and without the dollar signs and you can mix and match any label with any chip being offered. The only catch, if you do not order a standard chip then you will have to apply the label yourself.
A few people have expressed interest in 39mm chips, Please respond with how many chips you would be interested in if 39mm were to be offered. I am thinking we would need to order at least 5000 39mm chips to make it worth while.
I want to make this clear. I am calling this a GB but I will be charging a design fee for this order - 2¢/chip. I know this goes against the normal GB rules, if anybody has any issues or concerns with this please speak up now. I was not going to run the GB, however so far nobody has stepped forward. The design fee covers all the work I have done up until this point and I will be working with Sun-Fly to get the chips created.
Looks like we will be able to offer option 2. Right now it looks like I am going to offer labels with and without the dollar signs and you can mix and match any label with any chip being offered. The only catch, if you do not order a standard chip then you will have to apply the label yourself.
A few people have expressed interest in 39mm chips, Please respond with how many chips you would be interested in if 39mm were to be offered. I am thinking we would need to order at least 5000 39mm chips to make it worth while.
I want to make this clear. I am calling this a GB but I will be charging a design fee for this order - 2¢/chip. I know this goes against the normal GB rules, if anybody has any issues or concerns with this please speak up now. I was not going to run the GB, however so far nobody has stepped forward. The design fee covers all the work I have done up until this point and I will be working with Sun-Fly to get the chips created.
- Status
Similar threads
- Locked
