Large Foam Sheets (1 Viewer)

MoscowRadio

Flush
Joined
Jan 2, 2014
Messages
2,464
Reaction score
1,688
Location
Phoenix, AZ
Hey guys. I’m getting ready to build a 54” octagon table for a friend and the only 1” rail foam that YAT sells maxes out at 54”. I just wanted to ask if there was a place where I could order a larger sheet of good foam?

Thanks!
 
I'd make 4 cuts from corner to opposite corner for each side... Cut length should be as small as you think will work. Test stretch and cut more if you need to.
 
I'd make 4 cuts from corner to opposite corner for each side... Cut length should be as small as you think will work. Test stretch and cut more if you need to.

Do you staple the foam to the rail? It seems like it would be necessary in this instance. For all of my builds I use spray adhesive to attach the foam and then just staple the vinyl to keep it in place.
 
Do you staple the foam to the rail? It seems like it would be necessary in this instance. For all of my builds I use spray adhesive to attach the foam and then just staple the vinyl to keep it in place.

No. Spray adhesive to tack in place, staple the vinyl to hold in place.

I've never cut foam like I'm proposing, but seems like it should work...
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account and join our community. It's easy!

Log in

Already have an account? Log in here.

Back
Top Bottom