Sold 3d3P flattening rack and BRPro ceramics for 39mm flat chips (1 Viewer)

[Cheroczech]

Auction Details (Archived)

---

Auction ends at: 7:00 PM Eastern Time
Auction ends on: Nov 10, 2024
Starting bid: $1
Minimum bid increment: $1
Payments accepted: PayPal F&F, Venmo, Zelle
Shipping terms: Free to US, International at cost.
Ships via: USPS Small Flat Rate Box

---

This is for flattening 39mm chips. If you are trying to flatten 43mm chips, you should look at the other auction.

I accept Venmo, Zelle, PayPal friends, and PayPal G&S (if you pay the premium). Free shipping for USA. Other destinations, buyer pays shipping.

Auction items:

• Orange rack from 3d3P designed for setting up twenty 39mm chips to be flattened at a time.
• Twenty-two 43mm blank ceramic spacers from BR Pro Poker. The ceramics are oversized and recommended for flattening your 39mm chips.
• Pink shuffle stack rack from 3d3P.

Flattening is easy if you've never done it. Just treat it like barbecue -- low and slow.

1. Buy a heating pad with a thermostat. This one is recommended.
2. Preheat your heating pad to 140°.
3. Fold the heating pad in half. Heat 20 chips inside at 140° and 22 spacers on top for 10 minutes.
4. Place warm chips and spacers in the 3d3P rack and lightly clamp with something like this one which has a hand screw. Only clamp hard enough to keep the barrels together.
5. Heat 45 minutes while clamped in the 140° heating pad folded in half.
6. During the 45 minute heat, tighten the clamp every 15 minutes. Only use two fingers to lightly tighten just enough to hold the barrel together. Do not crank it down.
7. No more heat. Remove barrels from the heating pad and lightly tighten.
8. Cool for an hour, tighten the clamp one last time, cool for another hour.
9. Unclamp and leave your flattened barrel stacked vertically for 24 hours.

 

[jamesjkim]

1

 

[ekricket]

6

 

[twocannons]

8

 

[PUN26802]

9

 

[jamesjkim]

10

 

[Nitterdonker]

12

 

[jamesjkim]

13