CPC Move Updates (7 Viewers)

[Mudfever]

Excerpt from the email sent today by Mike to people waiting for an old order to be produced in the new factory:

I wanted to give you and update on where we are with the move and getting your order out. All of the equipment has been shipped out to Woodinville and has arrived (in one piece even!). The Maine factory is now completely shutdown as of yesterday.
The plan is still to get all of your orders complete before we start producing any new orders.

I hate giving out updates and guesstimates while too much of it is out of my control. But we're getting close now. My best guess is that we'll be operational in around 30 days. Once we're up and I'm done with permits, contractors and inspectors then things will be completely under my control.

On the positive side, while we're waiting on contractors we've had the opportunity to do much needed maintenance on all of the machinery and things should run much, much smoother going forward.

I came here to post this. He also included some photos. New CPC Yellow is FIRE!

Mud

 

[Eriks]

I came here to post this. He also included some photos. New CPC Yellow is FIRE!

Mud

You mind sharing with the class?

 

[cpac54]

I came here to post this. He also included some photos. New CPC Yellow is FIRE!

Mud

Personally, I’m more excited about the fact that CPC is now going to be offering Tiger Claw and V-spot edge spots! (Am I doing it right? )

 

[Mudfever]

He must have locked the new color palette pic’s. Can’t get them to copy….

Mud

P.S. @CPC_Mike let me know if you want these pulled.

 

[Eriks]

View attachment 1615159View attachment 1615160View attachment 1615161

He must have locked the new color palette pic’s. Can’t get them to copy….

Mud

P.S. @CPC_Mike let me know if you want these pulled.

I didn’t even realize you were kidding about the yellow, I’ve clearly had enough wine over the holidays now

 

[suchj0sh]

Lotta damn work I bet. Courage too.

 

[Tonysquander]

Nice. Looking forward to seeing him get back into production

 

[chippitydoodah]

I knew this looked familiar!

 

[Jmanguy09]

Looking good, cant wait !!!!

 

[chipinla]

When I can I send you money??

 

[mr11]

Just saw an update was posted on their website yesterday

 

[streetthrowback]

sub'ed

 

[Kid_Eastwood]

When I can I send you money??
View attachment 1619344

Nice !

My order will be also on that mold. Always loved it.

 

[Kid_Eastwood]

Recently (last weekend), I tried to reach out to Mike via e-mail in order to update my order (add more quantities).
For those who have been reaching out to him recently, do you know if he uses to reply as fast as David used to ?

-- asking this as I am wondering if my e-mail might have been considered as spam and Mike might not have seen it --

 

[Pippa]

Recently (last weekend), I tried to reach out to Mike via e-mail in order to update my order (add more quantities).
For those who have been reaching out to him recently, do you know if he uses to reply as fast as David used to ?

-- asking this as I am wondering if my e-mail might have been considered as spam and Mike might not have seen it --

He replied me last February after 2 months on my previous message here in PCF ( no email)

 

[Kid_Eastwood]

OK - I'm not in a hurry but just hope with addon request can be considered before my order goes to prod.

 

[NotRealNameNoSir]

OK - I'm not in a hurry but just hope with addon request can be considered before my order goes to prod.

Are orders currently in production?

 

[Kid_Eastwood]

Are orders currently in production?

I don't know but according to the last timings that have been provided, I guess it should be starting soon.

 

[Fran]

He did not respond to any of my emails (three), the first of which was sent… five months ago...

 

[Baxit]

If nothing else, they can easily pivot to bourbon distillery

 

[Gavin]

Recently (last weekend), I tried to reach out to Mike via e-mail in order to update my order (add more quantities).
For those who have been reaching out to him recently, do you know if he uses to reply as fast as David used to ?

-- asking this as I am wondering if my e-mail might have been considered as spam and Mike might not have seen it --

I'm trying the same thing (adjust / add-on). Mike replied to my email request back in October saying to follow up when CPC opened back up to get the add-on/changes.

Received Mike's mass email update on 1/1/26 and saw his latest update on the website (Jan 15th). I sent another email at the end of January (thinking CPC was about to open up), but no response as of yet.

I have two orders in the CPC Scroll queue (placed & paid Dec'24 and Mar'25)...

I'll email again when CPC opens back up. It's really not dire or urgent at all - just hoping for a new update sooner than later.

 

[Pippa]

I'm trying the same thing (adjust / add-on). Mike replied to my email request back in October saying to follow up when CPC opened back up to get the add-on/changes.

Received Mike's mass email update on 1/1/26 and saw his latest updated on the website (Jan 15th). I sent another email at the end of January (thinking CPC was about to open up), but no response as of yet.

I have two orders in the CPC Scroll queue (placed & paid Dec'24 and Mar'25)...

I'll email again when CPC opens back up. It's really not dire or urgent at all - just hoping for a new update sooner than later.

That’s all we need
UPDATES!!!!

 

[ChipMonster]

Cut card group buy 2.0

 

[UniLover]

Received Mike's mass email update on 1/1/26 and saw his latest update on the website (Jan 15th). I sent another email at the end of January (thinking CPC was about to open up), but no response as of yet.

Hum, should I be worried I did not get the mass email update? I had paid Dave thinking my add on was going to be one of the last batches made in Maine but apparently I had missed the deadline or something so Mike would have to make it.

 

[Pippa]

Hum, should I be worried I did not get the mass email update? I had paid Dave thinking my add on was going to be one of the last batches made in Maine but apparently I had missed the deadline or something so Mike would have to make it.

no
it's just don't finished the old orders in Maine
my order was paid in february 2025 and suppose made in old factory ................ nothing

 

[LionPaladin88]

i am thrilled the move is completed! i can't wait to see the new edge spots and colors!!

 

[ChipMonster]

Has anyone heard any new updates given we are into March now? Anyone know what order they’ll start running molds when up and running as well?

 

[BigGrizz]

i am thrilled the move is completed! i can't wait to see the new edge spots and colors!!

 

[Felt_Lizard]

i am thrilled the move is completed! i can't wait to see the new edge spots and colors!!

While your optimism *is* admirable, many of us are simply hoping for a successful re-open, along with continuing product that does not harken back to the ~dark days~ of Chapter Vegas...

 

[BigGrizz]

"Chapter Vegas"

Well I'm lost again...