bsdunbar1
4 of a Kind
Love the table, and that cloth design is FIRE
-
PCF is an Amazon Associate and an eBay Partner. If you make a purchase through one of our links, we may earn a commission at no extra cost to you. Thank you for your support!
Table Showcase (pics) (28 Viewers)
- Thread starter RowdyRawhide
- Start date
Thanks! I was worried about it translating to green but it worked. Got a black one too as back up. Maybe for the next build.Love the table, and that cloth design is FIRE
Thoraxe
High Hand
RocAFella1
Royal Flush
Do you deliver?
BPTDirector
Full House
If you could pass on caster mods that would be awesome! Thanks!!I actually have about 60 of them. Bought out a country club. If anyone wants to buy one of my other tables they can take some too.
Experimenting with some of them a bit
Took some trial and error, but managed to get casters to work
No problem. Took a lot of trial and error.
Eventually found this as a solution.
Use these inserts in the legs. The old inserts already on the gassers just pop off
https://amzn.to/4lLbzIE
And I used these casters but any 5/16-18 will work. I tried out many different options and found the ball casters to work and look best
https://amzn.to/4nLD86v
I only started looking to do this because the raised rail made my table a smidge taller than I preferred. Didn’t want to modify the table legs. So the casters do add some height compared to before, but I think it’s better that way. No one likes being too short at the table. And it’s not a huge difference, but was just enough for what I needed.
DO NOT try to use the black plastic looking inserts. Tried those first and thought I had it solved. Went to sit down and the wheels flew out of the legs and I landed flat on my ass.
Green was 100% the right call. I’m planning on going with a similar felt/rail colour combo on my next build (which reminds me, I really need to wrap that up… )Thanks! I was worried about it translating to green but it worked. Got a black one too as back up. Maybe for the next build.
jamesjkim
Flush
Where’d you get the felt made?
I’ve used Tony in the past for my tables and couldn’t be happier with them. Since this is a round and dealing is generally much easier I didn’t want much glide so I decided to try casino supply. I ordered their “PRO microsuede” which is their lowest tier.
Cloth is nice and print quality is good. I don’t think it’s quite as sharp and deep as Tony’s colors, but it is good. More nap than I’m used to. We’ll see how it holds up and cleans.
The glide isn’t very good, but that’s what I was going for on a round. Have to toss pretty hard to even reach the rail. I wouldn’t recommend for a standard shaped table.
jamesjkim
Flush
Thanks for the details! I suspected it wasn’t Tony’s but it makes sense that you don’t need to pitch far since it’s a round table. Love how the table came out!
BPTDirector
Full House
Here and installation complete. Built like a tank. Shuffle up and Deal! Gorilla FTW!!
Freeroll
Two Pair
Just finished this table for my buddy, for his house he just bought (in the garage actually)
danopoker
Pair
I don't think I've posted a shot of the whole completed table, so here goes.
Super clean and classy John, nice setup
Bloo_Design
Sitting Out
Good to see it installed!
danopoker
Pair
It runs like a dream!What a beautiful table!
Oh nice deckmate shuffler too!
danopoker
Pair
Indeed, it came out great!
Is the rail texuede from YAT?
I’ve been interested in this shape with a dealer cutout lately. How do you like it so far? Did you have a standard/traditional oval in the past before?
A while ago, you launched a thread looking at pub vs round. I thought you went pub? Did you build it? What changed your mind?
I did go pub previously. I still think it’s a great shape and an excellent option… if that’s what fits the room best. I switched rooms and round was able to work in the new room. All things equal a round wins in every way for me. I just didn’t do it before because the size I wanted would have made the room extremely crammed.
https://www.pokerchipforum.com/threads/pub-72”-vs-58”-round.88441/page-5#post-1935977
Bloo_Design
Sitting Out
Glad to see the printed cloth turn out well.
digster05
High Hand
Repurposed dining room table for the legs ftw
Diy top and rjdev topper
TheDirtMerchant
Two Pair
44x96
DIY table, 10 Jumbo Cupholders, LED raised rail
Chanman Custom Felt
DIY table, 10 Jumbo Cupholders, LED raised rail
Chanman Custom Felt
Last edited:
Thanks. I went back to that thread and noticed you switched because of the room size- I was curious here if, over time, you came to hate the pub so much (in the same space) that you went to round or if something else changed.
Looks great, and your outer track design - the use of fading to indicate zones for each player - is incredible.
Create an account or login to comment
You must be a member in order to leave a comment
Create account
Create an account and join our community. It's easy!
Log in
Already have an account? Log in here.
Similar threads
