• PCF is an eBay Partner. If you make a purchase through one of our links, we may earn a commission at no extra cost to you. Thank you for your support!

Wanted Anyone got a few left over @Gear labels going spare? (1 Viewer)

11 0 0
Status
Not open for further replies.
54 0 0
phcjpp said:
Hi There,

I have now invested in a milling setup (first in the UK? Probably not :) ) and wondered if anyone has a couple of labels going spare to help me set my milling depth? Anything will do (I have a 7/8" bit) happy to cover cost / postage of course.

Ta
Chris
Click to expand...

Chris, I think I got some stuff I can send you.
 
118 0 0
Similarly I have an entire extra sheet or two of Gear 7/8” labels if you need. I would just need to know by end of day as I will be out of town tomorrow for an extended period.
 
11 0 0
Eloe2000 said:
Similarly I have an entire extra sheet or two of Gear 7/8” labels if you need. I would just need to know by end of day as I will be out of town tomorrow for an extended period.
Click to expand...
Will let you know - sounds like @PocketAces might have some and as they are in the UK thats very easy.

Chris
 
47 0 0
I just measured a murdered chip with a micrometer and came up with .0225mm on one chip and .0235 on another. Might be a good depth to start.
 
11 0 0
joeyshin said:
I have a mirage cash set laminated texture labels I’m not going to use.
Click to expand...
Thanks for the offer! I have a couple of offers from the UK now so hopefully one of those pans out and its obviously really easy on postage. Will certainly ping you if that falls through.

Also looking to train my daughters (17/16) to do this as a summer holiday job!

Chris
 
47 0 0
phcjpp said:
Thanks for the offer! I have a couple of offers from the UK now so hopefully one of those pans out and its obviously really easy on postage. Will certainly ping you if that falls through.

Also looking to train my daughters (17/16) to do this as a summer holiday job!

Chris
Click to expand...
There you go!!! Get the kids working, work smarter, not harder. :cool ;)
 
138 0 0
JesterTX said:
I just measured a murdered chip with a micrometer and came up with .0225mm on one chip and .0235 on another. Might be a good depth to start.
Click to expand...
I think you have messed up the units in some way. 0.0225 mm == less than a thousandth of an inch, 0.000885" ??

Maybe you meant 0.0225 inch = 22.5 thousandths aka 22.5 mils, which is pretty deep ... perhaps the decimal point is in the wrong place, 0.225 mm == 0.008 inch?
 
Last edited:
47 0 0
Gear said:
I think you have messed up the units in some way. 0.0225 mm == less than a thousandth of an inch, 0.000885" ??

Maybe you meant 0.0225 inch = 22.5 thousandths aka 22.5 mils, which is pretty deep ... perhaps the decimal point is in the wrong place, 0.225 mm == 0.008 inch?
Click to expand...
Yup was in inches. .0225 inch sorry, just measured my murdered THC chip and that is what is coming out too. Which is .58mm on my digital micrometer.
 
11 0 0
Apparently exactly the same - just the UK name for it! 'Mineral Oil' in the UK means something very different I think.

From a quick google ""Mineral oil", sold widely and cheaply in the US, is not sold as such in Britain. Instead, British pharmacologists use the terms "paraffinum perliquidum" for light mineral oil and "paraffinum liquidum" or "paraffinum subliquidum" for somewhat more viscous varieties."

Best
Chris
 
56 0 0
Gear said:
I think you have messed up the units in some way. 0.0225 mm == less than a thousandth of an inch, 0.000885" ??

Maybe you meant 0.0225 inch = 22.5 thousandths aka 22.5 mils, which is pretty deep ... perhaps the decimal point is in the wrong place, 0.225 mm == 0.008 inch?
Click to expand...
So how many mils thick are your thickest, laminated labels?
 
11 0 0
JesterTX said:
Yup was in inches. .0225 inch sorry, just measured my murdered THC chip and that is what is coming out too. Which is .58mm on my digital micrometer.
Click to expand...
Hey Jester - sorry old thread but now milling and just want to sanity check my work!!!

Old practice roulette THC coming in at 3.228 mm thick pre milling. And 2.147mm once milled at thinnest point so 1.081mm chip removed so 0.5405mm depth on each side created for the label. Is that what you were measuring when you said 0.58?

Very Best
Chris

IMG_0481.jpg


@JesterTX
 
118 0 0
A beautiful site.

I have lots of extras but I am away from home where they are for two and a half weeks. If you don’t find any by then, let me know.
 
47 0 0
phcjpp said:
Hey Jester - sorry old thread but now milling and just want to sanity check my work!!!

Old practice roulette THC coming in at 3.228 mm thick pre milling. And 2.147mm once milled at thinnest point so 1.081mm chip removed so 0.5405mm depth on each side created for the label. Is that what you were measuring when you said 0.58?

Very Best
Chris

View attachment 741678

@JesterTX
Click to expand...
.58mm using my micrometer
 
47 0 0
After I murdered the chips, I was measuring .58 mm on a Paulson THC and on a murdered WTHC T500I got .59-.60mm avg. depth. I was able to pull off a whole WTHC label and that was measuring .43mm.
 
Status
Not open for further replies.

Similar threads

Wifey
  • Locked
  • Sticky
Services 2026 - Goods and Services Gear Labels provides
Replies
0
Views
736
Wifey
Wifey
cpac54
  • Locked
  • Trade Trade
Canceled Ri0 WS0P or Ojibwa tournament set for a Cash Set, anyone?
2
Replies
31
Views
2K
Josh Kifer
Josh Kifer
mdt11
Lessons from a first-year host
2
Replies
34
Views
2K
TheYeti
TheYeti
Gubbins
  • Locked
  • Wanted Wanted
Wanted Has anyone got some spare labels for THC mould
Replies
2
Views
416
dmoney
dmoney
Nuhockey
  • Locked
Giveaway 2025 Dealer Button Madness Tournament.
4 5 6
Replies
177
Views
9K
krafticus
krafticus

Buyer

phcjpp

phcjpp

Joined
Messages
419
Location
(London) + Shipping to Portland, Oregon, USA

More ads from phcjpp

Back
Top Bottom