HeresyReznor
Pair
Rollers on the used shuffle tech that came with my table are worn and letting multiple cards feed at the same time, jamming the unit. Last night my poor 5 of clubs was brutally crushed underneath the carriage as the extra cards occasionally bounce around and either flip over the side covers or pop up in the middle and flick over the top of the tray.
Anyone else have one of these and interested in replacement parts? Getting multiple vendors to send me samples of the white rubber washers, kicker washers and the drive o- rings, will try and get a whole maitenance/replacement kit together if I can.
For now have used 1/8 and 1/16 wide elastic bands with a few dabs of crazy glue put overtop of the washers as they are barely above the tray height now.
Works better but still getting occasional misdeals every 5 or so shuffles. Surprisingly lighter thinner cards shuffle without incident compared to the copags and bicycle prestige.
Anyone else have one of these and interested in replacement parts? Getting multiple vendors to send me samples of the white rubber washers, kicker washers and the drive o- rings, will try and get a whole maitenance/replacement kit together if I can.
For now have used 1/8 and 1/16 wide elastic bands with a few dabs of crazy glue put overtop of the washers as they are barely above the tray height now.
Works better but still getting occasional misdeals every 5 or so shuffles. Surprisingly lighter thinner cards shuffle without incident compared to the copags and bicycle prestige.
