Rounders Replica Chips , CPC Scroll Mold , sample sets and small orders (2 Viewers)

Status
Not open for further replies.

Racer96

Flush
Joined
Aug 12, 2013
Messages
1,763
Reaction score
3,659
Location
Canada
Ok everyone, we're trying to get final numbers to make sure that there is enough commitment to bring the two molds to life.

David has posted here for anyone that is looking to put together a full order (minimum 300 chips).

http://www.pokerchipforum.com/showthread.php/4082-Rounders-on-the-Scroll-Molds


PattheCat put together this awesome mockup of the chips!

ZusammenRoundersScroll_zps7f41d5a6.png


Check out those oversized pieces of perfection. (Although I'm going to go with a slightly different colour on the 5k :P )

Now, anyone that is interested but in just sample sets or heads up sets, please post what you are committing to in this thread. I will collect funds and add it in to my order, and will re-ship to anyone that is a member of the forum in good standing.

Pricing on 39mm 414 and 614 spots (as per the movie's $5,$25,$100 and $500 chips) is a level 2 chip @ $1.92
I am planning on doing some of the $25 chips as a 314 level 1 chip @ $1.71
The 44mm chips I am hoping to do would be a 514 level 2 @ $2.89

There are already people working on doing fractional chips (quarters and fifty cents). The lineup of chips used in the movies go from $1 to $500 . (I believe the $1 was made, but I don't recall seeing them. Most movie sample sets consist of the $5 to $500)

Thanks!
Mike

edited Feb 13, 2015
Here is the list of all the participants:
I have sent out invoices to everyone that I was able to include in this order, please check your spam folder, because I have been sending a TON of emails.

72o
Abby99
AlbinoDragon
Azmatticus
Ben
beerlightbroker
BGinGA
Big Jilm
bmontana33
BNM
cdnbeerlover
ChaosRock
chicken rob
Dr Lecterr
eglide73
ellased
Forty4
gc
Godzilla28
jbutler
jfcj
johnnycnote
Junior24xx
Krony
LabMonkey
Lucky Dog
Mr Cheese
Mental Nomad
naked_eskimo
NorCalChip
oldman
psypher1000
pug
Quicksilver75
redbelly
Shaggy
solidsnake
spikeithard
suckoutking
tenpercenter
texasrambler
Tiltedfish
Tommy
tommythecat

Now, if you are not on the list (And you're supposed to be) PLEASE CONTACT ME IMMEDIATELY!!!

If you're not on the list (but wish you were!) please stay tuned. I did order extras, but I don't want to commit them to anyone until everyone has their orders in hand.

In the emails that I have sent out, I've asked everyone to pay their total amounts now , but I have not included any shipping yet to the final destination (I took the total shipping and handling charged by CPC to me and divided that by the number of total chips, then added that back in per everyone's orders) Once I have the chips in hand and have them packaged up and ready to ship, I will send out a second invoice for shipping. This was the easiest way I could think of.

Thanks again everyone!

Mike

PS For reference the chips are:
25c blue 124 white
$1 white 414 dg pink
$5 red 414 dg yellow
$25 green 414 dg peach
$100 black 414 dg green
$500 purple 614 dg arc yellow

44mm
$1000 canary yellow 514 blue
$5000 light chocolate 514 white
 
Last edited:
Definitely in for at least a sample of any chip that gets made - likely for a 100-ish HU set if the oversize chips are actually getting made. I keep trying to find a way to justify jumping in for a full set of these; unfortunately any set that I would anticipate being really useful going forward really needs to be mega-sized, and I just can't do that right now. :(
 
Mike, I'd like at least a sample set of these. I'll wait to see what chips are actually going to be made (colors, spots, sizes) before deciding which version(s) I'd like, if that's okay.

A 100-pc heads-up set is not out of the question, either.
 
One sample set of all denominations.

... Must reduce order to one sample set due to another expenditure.
 
Last edited:
Mike, put me down for 5 sample sets. Let me know where to send payment.

Thanks!
 
As I mentioned before.

I have playable sets on the following molds:
A mold, B mold, Circle Square, Diamond Square, Elephant and Crown, Fleur de Lis, H mold, Hourglass, Horsehead Right, Roman, and 44mm A mold

I have a small sample set of scroll mold chips, as well as chips from some european casinos on the mold.

It is hands down my favourite mold. Both for feel and for looks.

A few things. It used to be reserved solely for casino use (mostly in europe).
It is one of the few molds available with an oversize mold to match.

When I spoke with JimB in June, he mentioned it was one of his favorite molds as well.

I really want to see chips made again on this mold, and to also get the actual artwork from the movie is amazing.

Mike
 
As I mentioned before.

I have playable sets on the following molds:
A mold, B mold, Circle Square, Diamond Square, Elephant and Crown, Fleur de Lis, H mold, Hourglass, Horsehead Right, Roman, and 44mm A mold

I have a small sample set of scroll mold chips, as well as chips from some european casinos on the mold.

It is hands down my favourite mold. Both for feel and for looks.

A few things. It used to be reserved solely for casino use (mostly in europe).
It is one of the few molds available with an oversize mold to match.

When I spoke with JimB in June, he mentioned it was one of his favorite molds as well.

I really want to see chips made again on this mold, and to also get the actual artwork from the movie is amazing.

Mike


Were there over sized chips in the movie? I think the largest demon was the $500. I could be wrong. Haven't seen the movie in years.
 
Does anyone know if the TRK Rounders replica set have a $5000 chip? I cant find any info or pics of a $5k chip. I want to add to my set of 300 so I may want a rack of the oversized chips. Any help would be appreciated. Thanks.
 
Does anyone know if the TRK Rounders replica set have a $5000 chip? I cant find any info or pics of a $5k chip. I want to add to my set of 300 so I may want a rack of the oversized chips. Any help would be appreciated. Thanks.

My sample set doesn't include a $5000. Wait, was this a hidden brag-post about you having a set of TRK Rounders? :) Just kidding, I'm jealous.
 
I would like to order 2 sample sets (just as pictured in OP). Thank you for organizing this.
 
My sample set doesn't include a $5000. Wait, was this a hidden brag-post about you having a set of TRK Rounders? :) Just kidding, I'm jealous.

No, no...not a brag-post. :o It's a 1 table T1k tournament set w/ rebuys right now and I would like to add to it to make it more versatile for deeper stack tournaments or more than a single table tournament set. But I dont know if I should wait for more TRK Rounders to come on the market (which is almost non-existent in the secondary market) or add these beautiful 44mm's as high denoms.
 
Add the 44mms now. Can always buy the TRKs later. MOAR chips. I want to see those TRKs!
 
Status
Not open for further replies.
Back
Top Bottom