Mesnik44
3 of a Kind
Both are physically a part of the Bell Centre. The only reason why I mentioned those 2.
-
PCF is an eBay Partner. If you make a purchase through one of our links, we may earn a commission at no extra cost to you. Thank you for your support!
NHL Hockey Rink with Seating (1 Viewer)
- Thread starter 4SUMERZ
- Start date
OP
OP
4SUMERZ
Flush
That rink looks fantastic. Bossy was a great player. His career was cut short by a bad back. They had a great team from 80-84 I watched him on TVA sports analyst until he passed away.
OP
OP
4SUMERZ
Flush
Now you got me thinking that I should have purchased that last one at the one I frequent approx 1 month ago...I may look at the others in the area...they are everywhere lol
OP
OP
4SUMERZ
Flush
Although they were supposedly sold out, I reached out to the regional manager of Tim Horton's and he had 2 shipped to my nearest store. I removed the stick on decals and added decals that will match my new rink cloth. The Zamboni will hold 5 decks of poker sized cards with the top lid closed. I'll grab a pic of the Zamboni on the table once I install the cloth
Last edited:
OP
OP
4SUMERZ
Flush
The final hockey rink design stage to the actual printed poker cloth installed on my table.
It turned out just as I had imagined.
It turned out just as I had imagined.
GamingWithChips
Two Pair
OP
OP
4SUMERZ
Flush
Thanks. That is a printed felt on a 80" × 42" polyester gaming suede. My table is 4 pieces for the top portion. 1) The base or top of the table is 84"x42. 2) The center portion that the felt sits on is 1/4" plywood, with 1/8" foam glued to the plywood. 3) The outer portion from the center is also 1/4" plywood just a bit wider than the rail, which sits down over and secures the felt tightly in place, but the felt is trimmed and stappled under that plywood piece every foot or so around the perimeter. The outer portion has a 1/8" routered groove all around to fit the lighted diffuser. This section is secured by using a few drywall screws to force the outer portion to be even with the top center area. 4) The rail is 6" wide, and is notched on the front to sit on top of the diffuser/light track and then bolted from under the table using 8 bolts. Trimming the cloth is to clear the bolts so they can attach the rail.
It is very easy to change the cloth. My Mirage cloth is in storage for now, but I may bring it back in play sometime in the future.
sleepyhead
Pair
Can we see it with the Zamboni?
OP
OP
4SUMERZ
Flush
Lol...I forgot to put the zamboni on it. I'll grab a pic of it on the table tomorrow.
AlbinoDragon
Flush
You really should have a Zamboni dealer button. 
It travels around the table much like a Zamboni does on the ice, just without refreshing the surface as it goes.
It travels around the table much like a Zamboni does on the ice, just without refreshing the surface as it goes.
OP
OP
4SUMERZ
Flush
Now there is an idea for a custom dealer button...lolYou really should have a Zamboni dealer button.
OP
OP
4SUMERZ
Flush
OP
OP
4SUMERZ
Flush
sleepyhead
Pair
You should definitely do thatThis is a mini zamboni that could be used as a dealer button I suppose.View attachment 1668185
Go Bolts !!
Last edited:
Create an account or login to comment
You must be a member in order to leave a comment
Create account
Create an account and join our community. It's easy!
Log in
Already have an account? Log in here.
