CPC Chip Racks (1 Viewer)

[manamongkids]

http://www.pokerchipsonline.com/storage/storage.htm

As you see noted here,CPC offers 2 variations of chip racks. I am only interested in what fits HHR mold, my current racks are a bit lose and im looking for something with no wobble to it.

Anyone use either of these racks, and if so anyone specifically used them with HHR mold?

 

[Trihonda]

It'd be nice if those ordering custom chips got some sort of discount...

Can anyone explain the size of the barrels on these racks? Is there a comparable rack? I have 20-30 racks sitting unused right now (mostly Chipco 66.7) racks. and it'd be nice to be able to use those. However, if I need to get CPC racks, then so be it... $5.50 each isn't cheap, but I also know that compared to the chips, it's a small drop in the bucket.

 

[Robert P]

any update on this?

 

[Robert P]

fwiw, i'm curious what racks are best/most affordable for 39mm circle square CPC chips

 

[Wick125]

I have no experience with the CPC racks but FWIW both of my custom sets (ASM from 10+years ago) fit great in the old flexible Chipco racks.

 

[k9dr]

I use racks I purchased from @dennis63 at Key West Resort & Casino for my Suicide Queen MD-50's.

 

[BNM]

I use racks I purchased from @dennis63 at Key West Resort & Casino for my Suicide Queen MD-50's.

^^^This for my CirSqs.^^^ They work fantastic - a good, snug fit with no wobble.

 

[DJ Mack]

KeyWest racks work perfectly with my Circle Square and A Molds. Never had a barrel of HHR to test with.

 

[Shaggy]

@chipjoker

 

[AK Chip]

All of my chips are Burt Co. ASM CPC chips HHR,A-mold and Dice and card all fit snug in the higher priced ones at CPC. If you have these chips the racks are perfect.

 

[Robert P]

Would Brybelly racks work?

https://www.amazon.com/Brybelly-Cle...&srs=2586441011&ie=UTF8&qid=1481949907&sr=1-2

 

[BGinGA]

Depends on the barrel dimensions. Most ASM/CPC chips require 67.7mm racks, although some will fit in smaller Chipco racks (see @k9dr post above), and some are too tight for 67.7 racks..

Pretty sure that the Key West racks are 67.7mm, but @dennis63 can verify. Cheap racks (like Brybelly) are usually 68mm or larger, up to 70mm.

 

[dennis63]

Depends on the barrel dimensions. Most ASM/CPC chips require 67.7mm racks, although some will fit in smaller Chipco racks (see @k9dr post above), and some are too tight for 67.7 racks..

Pretty sure that the Key West racks are 67.7mm, but @dennis63 can verify. Cheap racks (like Brybelly) are usually 68mm or larger, up to 70mm.

You are correct, sir. The Key West rack is 67.7 mm.

We also stock a wider rack, too.

 

[Robert P]

Im ordering 39mm circle square mold