Canceled CPC/ASM Blanks - 1500 Chips, $1200 or Make an Offer / Trade offer (1 Viewer)

Status
Not open for further replies.
$1200 or make me an offer, would trade for right Fantasy Paulson Tourney set, obviously I know not chip for chip. But 3-1 maybe depending on the set.

They are all 312 (3 edge spots - 1/2"), plain, circle square mold. The edges are sharp, with little to no wear. I really will not be disappointed if they dont go...! This said moving this will allow me to save faster for my custom project in the future. I do not want any solids, or hot stamps atm. GREAT SET FOR STAMPING, or IF YOU HAVE A MILLING SET UP!!

300 white chips with dayglo peach edge spots
300 red chips with dayglo arc yellow edge spots
300 green chips with dayglo yellow edge spots
300 black chips with dayglo green edge spots
300 purple chips with dayglo pink edge spots

Racks not included. Pay Pal F&F Shipping at Buyers Expense.
 

Attachments

  • Chips 1 - Copy.jpg
    Chips 1 - Copy.jpg
    237.5 KB · Views: 376
  • Chips 3 - Copy.jpg
    Chips 3 - Copy.jpg
    266.8 KB · Views: 400
  • Chips 4 - Copy.jpg
    Chips 4 - Copy.jpg
    276 KB · Views: 376
  • Chips 5 - Copy.jpg
    Chips 5 - Copy.jpg
    234.4 KB · Views: 400
  • Chips 6 - Copy.jpg
    Chips 6 - Copy.jpg
    161 KB · Views: 408
  • Chips 7 - Copy.jpg
    Chips 7 - Copy.jpg
    219.7 KB · Views: 393
  • Chips 8 - Copy.jpg
    Chips 8 - Copy.jpg
    173.3 KB · Views: 376
  • Chips 9 - Copy.jpg
    Chips 9 - Copy.jpg
    118.9 KB · Views: 365
  • Chips 10 - Copy.jpg
    Chips 10 - Copy.jpg
    126.3 KB · Views: 329
  • Chips 11.jpg
    Chips 11.jpg
    137 KB · Views: 307
  • Chips 12.jpg
    Chips 12.jpg
    131.5 KB · Views: 321
  • Chips 13.jpg
    Chips 13.jpg
    144.3 KB · Views: 412
  • Chips 14.jpg
    Chips 14.jpg
    171 KB · Views: 414
  • Chips 15.jpg
    Chips 15.jpg
    194.4 KB · Views: 405
  • Chips 16.jpg
    Chips 16.jpg
    179.7 KB · Views: 299
  • Chips 17.jpg
    Chips 17.jpg
    143.3 KB · Views: 254
Last edited:
I probably would have thought they had a recess also. The pictures of the face look like they do.

They could still be milled, but probably not cost effective on this type of set unless you can do it yourself.

Could always use them as is.

In any case good luck with the sale man. If the had the recess I'd be interested in them myself.
 
I probably would have thought they had a recess also. The pictures of the face look like they do.

They could still be milled, but probably not cost effective on this type of set unless you can do it yourself.

Could always use them as is.

In any case good luck with the sale man. If the had the recess I'd be interested in them myself.
Colter, that was exactly what happened to me, I was like OH these are perfect, the ebay pic looked like they could... I did talk to Gear before they arrived and apparently its a very common mistake chippers make with CPC Blanks... and Milling them puts it at cost to order customs, or close to it... I'm thinking maybe I should just auction them for a few days vs make me an offer. I was kind more curious on the trade value vs cash value, but either or is good. I thought I liked the CPS set I was building, but they dont compare to these really, and you are 100s percent on use as is, cause for 15 years we have used the "cough" dice chips, and these are like Ferrari'S compared to those!
 
[QUOTE="MC Poker, post: Hence the wife buying all the purses and making me move some!!
[/QUOTE]

LOL this had me on the floor laughing because I was waiting all day for the package to arrive kind of like a High School kid or College Student waiting at home to intercept a report card. I was waiting all day as I work from home a lot and I went up stairs to take care of something at 5:30. Wouldn’t you know a second postman rings the doorbell at that time. Says the packages were heavy and he didn’t want to leave it outside. I start getting the questions about what I bought. I bring up that she bought a few new Jackets and a few designer purses in the last few months. That did not go over well. Jackets and Purses are necessities and Poker Chips are luxuries. Luckily for me I don’t need to sell anything. She’s more worried that I’m going to get the Dodge Challenger V8 Scat Pack that I’ve been wanting and just show up in it one day. She says I can get it next year though. So maybe I’ll wait.
 
Would be perfect for a custom hot stamp set (either tourney or cash). Had these in my watch list until they were posted to the forum, they went quiclkly after that. GLWS!
I honestly didn't see them on the forum till after I bought them. When I saw them on EBAY I figured by time I researched and asked Gear about relabeling them they'd be gone. The green, black and purple are the perfect chips for what I was thinking for a relabel set. Sadly can't. And I don't have buyers remorse. I'm leaning towards dumping the CPS chips once the last box arrives and just using these till I have the bank roll to customize a Fantasy Paulson Set
 
I bought the sets I wanted before it was posted on Saturday morning. I think MC bought his before that also. By the time the link was posted only a set of red and a set of white were left and MC snatched those up shortly after. I know a bunch of people were eyeing them before that.
 
You’re going to try to mill them yourself?
Ive been researching, right now I have a call into a machine shop (old buddy owns one) but they are slammed, but he said he'd look into it. But yea, Ive watched countless videos and read all the threads, and I have a buddy who does construction who said he'd help, it'll take forever to do hence sell or trade for a good price. Ive had one cash offer for 450 (did have one guy message saying if I decide to let it go for what I got into it he'd probably take em) and two chip set offers, both were fair offers, one was 600 Matsui's and other for little more the 300 Paulson Fantasy chips, problem was each set left me short of a 2 table start for what my guys play. I did bribe the wife so I dont have pressure to sell, and I dont care for the white/peach chips, so I figure, set up a Jig on a drill press and try a barrel of whites, if they look nice then Ill take a few hours a week and over a month or two Ill have a set ready for custom labels, shoot I have enough chips I would have a nice cash set and tourney set and if I wanted to stretch it could do two sets of either and one of the other. I was really hoping for great trade offer with some Paulsons, even if it meant putting in some more cash. But at last nothing. SO Ill leave this go for a day or so, and then I will look into labels/themes/and start my journey to the custom set!! Was the whole goal when I bought them, minus the 20 hours of milling and risk of ruining some chips!
 
Status
Not open for further replies.

Seller

Joined
Messages
821
Location
Green Bay WI

More ads from MC Poker

Back
Top Bottom