Buge
Flush
The rail is so much nicer on these new ones vs the old ones. Great pickup!
I’m glad I made the upgrade to the LED, I love it.$180 was too good of a deal to pass up. Finally ordered the LED version and now my other table will be just for transporting to other games and if I ever need a second table
$180 was too good of a deal to pass up. Finally ordered the LED version and now my other table will be just for transporting to other games and if I ever need a second table
Finally.$180 was too good of a deal to pass up. Finally ordered the LED version and now my other table will be just for transporting to other games and if I ever need a second table
I grabbed two new Barringtons yesterday but went with the non-LED ones. $149 each and Walmart is delivering them today within 24 hours. Solid!
Stocking stuffer prices.@jamesjkim just spotted they were down to $119 at Walmart. Insane!
Good looking out. I’ve been following here and that specific product page for about a month and a half now. It just keeps dropping!@jamesjkim just spotted they were down to $119 at Walmart. Insane!
I assume in person?@jamesjkim just spotted they were down to $119 at Walmart. Insane!
Nope! Just grabbed one online. Free shipping.I assume in person?
I checked right when I saw the post for 119 and it still said 169. I'm assuming it's regional. I'm in Wisconsin.Nope! Just grabbed one online. Free shipping.
I could use a back up to my backup![]()
Good, use this time to UPGRADE YOUR CUPHOLDERS.Hope that you made her pay twice over.
Mine came today too.
soooo.. any suggestions?Good, use this time to UPGRADE YOUR CUPHOLDERS.
I second this...any good info on how to upgrade the cupholders?soooo.. any suggestions?
I second this...any good info on how to upgrade the cupholders?
I just purchased 2 and they arrived this week. My next Event is on Jan 9 so I have a bit of time.
soooo.. any suggestions?
Standard cup holders are definitely too shallow and the upgrades are a really nice improvement for the cost/time.
View attachment 1228738
Pro tip: drill your pilot hole from the top side of the table, then flip the table over and use the hole saw from the bottom side. It saves you from ripping the pleather on the rail.
Cup Holders
https://www.amazon.com/gp/product/B0789HG6NW/
Hole Saw
https://www.amazon.com/gp/product/B08YJFNQR7/
My upgrade
https://www.pokerchipforum.com/threads/barrington-poker-table-thread.30910/post-2192321
Hey everyone! This is a guide on how to install a drawer to a barrington foldable poker table (or any foldable table) for under $75. With this mod you can still fold the table as usual for storage. You only need a screwdriver (electric preferred) and these things from amazon:
1) this specific 16in drawer (Amazon Drawer) (the pwr one isn't necessary)
2) 40lbs Neodymium Magnets 10pcs(Amazon Magnets)
It’s super simple as all you really need to do is screw the magnets under the table like this. Just make sure that the magnets align with the drawer sliders by marking it with a sharpie:
View attachment 1375848
The magnets are super strong and should be able to hold 4 racks of chips easily. If you want stronger magnets there are stronger options but I found the 40lbs is more than enough. After the magnets are installed, just attach the sliders for the drawer to the magnets and you’re done! For a better and more flush look, push the sliding part of the drawer all the way to the end and have the actual drawer be on the outside of the wall like this:
View attachment 1376316View attachment 1375849
The drawer itself can hold up to 4 racks of chips and still have some wiggle room. This is super convenient as I can take chips out from this drawer for rebuys, store cash, etc. The best part of this is that it really only takes away about two inches of space between your legs and table (i have a friend who’s 6’4 230lbs and he can sit under the table fine with our chairs).
After you’re done having a good poker session, you can just pull off the drawer (with the sliders connected) and set it aside. This way you can fold up your table like normal. You’ll find that taking the actual drawer off from the table will take some force as the magnets work very well.
Hopefully this is helpful for anyone looking to install a drawer for cheap without having to lose the best part about the table! Here are some more pictures of what it looks like if anyone needs:
View attachment 1376317View attachment 1376318View attachment 1376591
NOTE: It helps wonders if you have a low-profile chip tray bc it's slightly difficult to access the last row of chips. Not necessary just annoying.
Yeah they didn't discount the LED table any more (still $169) but I wouldn't ever need lighting around the rail on a table, just seems too mush of a pain that I don't need, although the rails are a tad better on those newer table. The basic table when priced right (below $100-$120) is just an excellent deal.I checked right when I saw the post for 119 and it still said 169. I'm assuming it's regional. I'm in Wisconsin.
EDIT: Oooooh, I see - the standard table is $119! Great deal. I prefer the LED table though since the armrests sit a little higher and if you put a topper on it sits a little nicer.
You might not plan to use the LEDs, but I highly recommend it. Getting the warm white COB LEDs and dimmer is a game changer.
LEDs off:
View attachment 1299681
Warm white COB LEDs at about 30%:
View attachment 1299683
This is a great cup holder tutorial as well:I second this...any good info on how to upgrade the cupholders?
I just purchased 2 and they arrived this week. My next Event is on Jan 9 so I have a bit of time.
That's cool..I skipped upgrading cupholders and bought 4 side carts with wheels off Amazon for $25 each. They have 3 levels. Drinks up top, cell phones mid level, The Bank and extra chips on bottom beside the bourbon. Took me 15 mins to put together. I only have to get up to pee now.
That's cool..
WHERES THE LINK!