ALL SOLD / PENDING!
These were destined for the scrap metal pile so I thought I'd see if there was any interest in them here before returning them there.
Two styles of metal trays that fit 60mm (OWPS-style) dealer buttons pretty nicely. Each style will hold 90 buttons per tray in three rows of 30. I'm keeping a couple and plan to line them with felt to better protect the buttons, and would definitely recommend doing the same.
A few of these lined up in a drawer filled with a huge button collection would look pretty killer IMO.
Style A:
- These are made of titanium with a smooth, raw finish
- 10-3/4" x 7-1/2" x 2" including handle; 9-1/2" long tray section only
- middle row: buttons fit such that they are supported on the two sides with about an 1/16-1/8" gap at the bottom (varies tray to tray)
- outer rows: fit varies such that buttons either rest on the bottom with a slight wiggle between the sides, or rest on the sides and just barely do not touch the bottom
- there is a "No-Pb" stamp in the middle of each row, but doesn't really affect how the buttons sit
- condition varies from new to used with minor blemishes and some tape residue on sides/ends; new ones go to first dibs
Style B:
- these are probably stainless steel but may be Ti, and have a lightly textured surface
- 11-11/16" x 7-1/2" x 2" with integrated sheet metal handle
- most middle rows fit with buttons resting on the sides with small gap at bottom (some variation tray to tray)
- most outer rows fit with buttons just touching the bottom with very little wiggle (some variation tray to tray)
- brand new condition (some fingerprints and manufacturing blemishes)
Offered for the price of shipping to US. They are, unfortunately, quite awkward to ship. Any combination of four will fit in a LFRB. Any combination of two will fit in a MFRB.
Dibs in thread only, please. I'm quite busy so if you don't hear back during the day, I will catch up with all interest in the evenings.
Edit: dealer buttons for showing fit only, they are not included.
These were destined for the scrap metal pile so I thought I'd see if there was any interest in them here before returning them there.
Two styles of metal trays that fit 60mm (OWPS-style) dealer buttons pretty nicely. Each style will hold 90 buttons per tray in three rows of 30. I'm keeping a couple and plan to line them with felt to better protect the buttons, and would definitely recommend doing the same.
A few of these lined up in a drawer filled with a huge button collection would look pretty killer IMO.
Style A:
- These are made of titanium with a smooth, raw finish
- 10-3/4" x 7-1/2" x 2" including handle; 9-1/2" long tray section only
- middle row: buttons fit such that they are supported on the two sides with about an 1/16-1/8" gap at the bottom (varies tray to tray)
- outer rows: fit varies such that buttons either rest on the bottom with a slight wiggle between the sides, or rest on the sides and just barely do not touch the bottom
- there is a "No-Pb" stamp in the middle of each row, but doesn't really affect how the buttons sit
- condition varies from new to used with minor blemishes and some tape residue on sides/ends; new ones go to first dibs
Style B:
- these are probably stainless steel but may be Ti, and have a lightly textured surface
- 11-11/16" x 7-1/2" x 2" with integrated sheet metal handle
- most middle rows fit with buttons resting on the sides with small gap at bottom (some variation tray to tray)
- most outer rows fit with buttons just touching the bottom with very little wiggle (some variation tray to tray)
- brand new condition (some fingerprints and manufacturing blemishes)
Offered for the price of shipping to US. They are, unfortunately, quite awkward to ship. Any combination of four will fit in a LFRB. Any combination of two will fit in a MFRB.
Dibs in thread only, please. I'm quite busy so if you don't hear back during the day, I will catch up with all interest in the evenings.
Edit: dealer buttons for showing fit only, they are not included.
