Thanks to Jim @TheChipVault for getting the ball rolling in this thread: https://www.pokerchipforum.com/threads/rancho-agave-dealer-buttons.135512/. But I figure I'd start a new thread, so that I can update the OP (to track actual interest/orders), and I can also change the "tag" (Interest, Taking Orders, etc.) on the post.
This is for bridge-size and poker-size cut cards (except for the original poker-size black background sparkly-gold lettering cut cards, which Jim will have and include in sold sets--not sure if he'll sell extras individually to people who aren't getting sets) as well as 60mm ceramic dealer buttons to be made by @BR Pro Poker.
Pricing is slightly higher than my recent DB and cut card GBs, at $2.25 per cut card (being made overseas and expecting at least 10% tariff + "brokerage" fees by UPS) and $7.75 per dealer button (have to pay ~11% in tax since BR Pro and I are both in CA). If we get a lot of demand, prices may go down, but please make your decision based on these costs.
UPDATE: Thanks to @Himewad joining the GB with the designs he's offering, we now qualify for better pricing on the DBs. So instead of $7.75/button, they are now $7/button!
Here are the 60mm ceramic DBs I am offering:
The individual A, B, C, or D choices have the same artwork on each side. A particular design must have at least 10 orders to have the edge stripe printed.
Note: I will not have a design made unless it gets at least 10 orders for the rolling edge printing. So vote by expressing interest in the design(s) you like most!
UPDATE: Since button designs A, B, C, and AB all use the same edge stripe artwork, I asked BR Pro if they could just combine the quantities and get rolling edge printing (which is done in a separate process from the printing on the faces of the buttons) on all four of these designs even if some don't meet the MOQ individually, and they said they are willing to do that!
I will also make these designs available to Justin's next 65mm or 80mm acrylic DB GB!
For the cut cards, here are my offerings:
All cut cards have the same artwork on each side.
I do not plan on offering the poker-size OG design, since Jim is including those in the sold sets. I don't know how many he's including per-set, nor do I know if he's going to sell the cut cards individually. If he's not, and there's demand for it (indicate that in your comment below), then I may accept orders for the poker-size OG design too.
Express your interest like so...
DB-A: 3
DB-B: 3
DB-C: 2
DB-D: 5
DB-AB: 5
Poker-A: 3
Poker-B: 3
Poker-C: 5
Bridge-OG: 5
Bridge-A: 5
Bridge-B: 5
Bridge-C: 8
Again pricing is slightly higher than before, at $2.25 per cut card (being made overseas and expecting at least 10% tariff + "brokerage" fees by UPS) and $7.75 per dealer button (have to pay ~11% in tax since BR Pro and I are both in CA). If we get a lot of demand, prices may go down, but please make your decision based on these costs.
Since the chips haven't even gone out yet, I'll likely keep orders open for about two weeks. After orders are placed, it may take up to a month to receive the products, so reshipping out to you should start mid-to-late October.
This is for bridge-size and poker-size cut cards (except for the original poker-size black background sparkly-gold lettering cut cards, which Jim will have and include in sold sets--not sure if he'll sell extras individually to people who aren't getting sets) as well as 60mm ceramic dealer buttons to be made by @BR Pro Poker.
Pricing is slightly higher than my recent DB and cut card GBs, at $2.25 per cut card (being made overseas and expecting at least 10% tariff + "brokerage" fees by UPS) and $7.75 per dealer button (have to pay ~11% in tax since BR Pro and I are both in CA). If we get a lot of demand, prices may go down, but please make your decision based on these costs.
UPDATE: Thanks to @Himewad joining the GB with the designs he's offering, we now qualify for better pricing on the DBs. So instead of $7.75/button, they are now $7/button!
Here are the 60mm ceramic DBs I am offering:
Note: I will not have a design made unless it gets at least 10 orders for the rolling edge printing. So vote by expressing interest in the design(s) you like most!
UPDATE: Since button designs A, B, C, and AB all use the same edge stripe artwork, I asked BR Pro if they could just combine the quantities and get rolling edge printing (which is done in a separate process from the printing on the faces of the buttons) on all four of these designs even if some don't meet the MOQ individually, and they said they are willing to do that!
I will also make these designs available to Justin's next 65mm or 80mm acrylic DB GB!
* * *
For the cut cards, here are my offerings:
All cut cards have the same artwork on each side.
I do not plan on offering the poker-size OG design, since Jim is including those in the sold sets. I don't know how many he's including per-set, nor do I know if he's going to sell the cut cards individually. If he's not, and there's demand for it (indicate that in your comment below), then I may accept orders for the poker-size OG design too.
Express your interest like so...
DB-A: 3
DB-B: 3
DB-C: 2
DB-D: 5
DB-AB: 5
Poker-A: 3
Poker-B: 3
Poker-C: 5
Bridge-OG: 5
Bridge-A: 5
Bridge-B: 5
Bridge-C: 8
Again pricing is slightly higher than before, at $2.25 per cut card (being made overseas and expecting at least 10% tariff + "brokerage" fees by UPS) and $7.75 per dealer button (have to pay ~11% in tax since BR Pro and I are both in CA). If we get a lot of demand, prices may go down, but please make your decision based on these costs.
Since the chips haven't even gone out yet, I'll likely keep orders open for about two weeks. After orders are placed, it may take up to a month to receive the products, so reshipping out to you should start mid-to-late October.
| Username | DB-A | DB-B | DB-C | DB-D | DB-AB | Poker-A | Poker-B | Poker-C | Bridge-OG | Bridge-A | Bridge-B | Bridge-C |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| @DrunkleWade | 1 | 1 | 2 | 2 | 2 | |||||||
| @AK Chip | 2 | 2 | 2 | |||||||||
| @pocketJs | 1 | 1 | 1 | |||||||||
| @TheBigTater | 2 | 3 | 3 | |||||||||
| @CraigT78 | 1 | 1 | ||||||||||
| @Nuhockey | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||
| @Himewad | 1 | 1 | ||||||||||
| @MrCatPants | 1 | |||||||||||
| @Schmendr1ck | 1 | 1 | ||||||||||
| @extreme517 | 2 | 3 | 3 | 3 | 3 | 3 | ||||||
| @Newenne | 1 | 1 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | |||
| @shorticus | 1 | 1 | ||||||||||
| @Suited Connector | 1 | 1 | ||||||||||
| @p5woody | 2 | |||||||||||
| @FestiveKnight | 1 | 1 | 1 | |||||||||
| @Shorn | 1 | 1 | ||||||||||
| @TheCollector25 | 1 | 1 | 1 | 1 | 1 | |||||||
| @Tonystark137 | 1 | 4 | 2 | |||||||||
| @grandmeme | 1 | |||||||||||
| @Jackstraw | 1 | 1 | 1 | 4 | ||||||||
| @Justin Olson | 2 | 2 | 2 | 4 | 2 | 2 | 2 | 2 | ||||
| @doughboy63 | 1 | 2 | ||||||||||
| @Flopalopagus | 1 | 1 | ||||||||||
| @JMC9389 | 2 | 4 | 4 | 4 | ||||||||
| @TheOffalo | ||||||||||||
| Total | 9 | 3 | 7 | 21 | 17 | 7 | 5 | 12 | 29 | 11 | 13 | 15 |
| DB-A | DB-B | DB-C | DB-D | DB-AB | Poker-A | Poker-B | Poker-C | Bridge-OG | Bridge-A | Bridge-B | Bridge-C |
Last edited:
I should have mentioned that!
