Interest 60mm Ceramic Dealer Button Group Buy (1 Viewer)

[Himewad]

I have run quite a few dealer button group buys over the years, and I've been contacted by a few people about running another one, so I'm testing the waters to see how much other interest there is for 60mm ceramic dealer buttons produced by our go-to DB vendor BR Pro Poker.

Looking for new designs, or older designs that will have solid re-order quantities.

@DrunkleWade @menapamw32 @kaimat @Jacks

 

[kaimat]

I'd be in for 2 DBs.

 

[GrindstonePoker]

I’d be in for 4

 

[sebjag]

I'd be interested in 1-2 DBs - what designs do you have in mind? I'm looking at getting a DDLM set

 

[Himewad]

I'd be interested in 1-2 DBs - what designs do you have in mind? I'm looking at getting a DDLM set

I want people to bring new designs for the most part. But I will re-run designs that have been in previous DB group buys if there is enough interest.

 

[vulp1337]

I'd probably be in for a bunch. Summoning @rjdev7 for that SPW dealer button artwork.

 

[UniLover]

Simpson donut with hole in the middle.

 

[Himewad]

Simpson donut with hole in the middle.

those were custom made (and drilled) by @Colquhoun I believe. Check with him to see if he's interested in drilling those again.

 

[DrunkleWade]

My fellow Aussie Faro Dunes owner, @Newenne and I were chatting about how we'd prefer a larger ceramic DB over the supplied fat hat.

I assume some of the US Faro owners (and the DB collectors) may also want one or two of these in their kit. These offerings have the blessing of @TheChipVault.

Cash and Tourney logos.

 

[Baldeagle9]

interested, so not customs just pre-made designs?

 

[Himewad]

interested, so not customs just pre-made designs?

Customs are very welcome. Lots of people (including myself) collect customs. Just understand that if the minimum of 9 per design isn't reached, it won't get the rolling edge printed (it would be plain white). Sometimes, this doesn't matter, but sometimes it does.

 

[chippitydoodah]

I'd be interested in an MGM button

 

[Himewad]

I'd be interested in an MGM button

View attachment 1514858

I don't think they would make it since it's an active casino, unfortunately.

 

[ParrotHeadPA]

I’d love to get some “high hand” buttons made.

 

[JJDiamonds]

I'm interested

 

[Baldeagle9]

Customs are very welcome. Lots of people (including myself) collect customs. Just understand that if the minimum of 9 per design isn't reached, it won't get the rolling edge printed (it would be plain white). Sometimes, this doesn't matter, but sometimes it does.

meaning I would have to order at least 9 myself if others didn't want to buy any of my design, that correct?

 

[DrunkleWade]

meaning I would have to order at least 9 myself if others didn't want to buy any of my design, that correct?

If you want the edge printed, yes. But, there's a fair chance that the DB collectors might want a couple at least.

 

[Kentucky]

I’d love a Sunset Beach button whoever has the artwork for that.

 

[Nuhockey]

I'd offer up for my High Hand and All In Plaques to be made as I was asked about these. The MOQ is 12 need to be ordered of each to get made by BROPROPOKER. @Flopalopagus and @Tonystark137

 

[Flopalopagus]

I’m always down for more db’s! I have a few that if we could find the right people with the art work i bet several would be interested in. Regardless, if the right stuff is included I’m in!

 

[twosevenbluff]

i would be interested in 1-2 DB, and potentially more from friends

 

[TX_Golf_N_Poker]

I would love to create a new DB with my SRV design. I've tried reaching out to @Johnny5 but his account here is no longer active, and he has not responded yet to an email I sent a few days ago. I have some of his work, so I may need to get another designer to take over for him.

This is the chip inlay art - similar to what I use in my avatar.

 

[sonofneeway]

what would be the cost for these?

 

[DrunkleWade]

what would be the cost for these?

https://brpropoker.com/collections/...-60mm-2-3-inch-chips-large-dealer-button-size

 

[Jacks]

I would order like 10 assuming I can get artwork for existing ones.

 

[extreme517]

My fellow Aussie Faro Dunes owner, @Newenne and I were chatting about how we'd prefer a larger ceramic DB over the supplied fat hat.

I assume some of the US Faro owners (and the DB collectors) may also want one or two of these in their kit. These offerings have the blessing of @TheChipVault.

Cash and Tourney logos.

View attachment 1514793

I'm in for 2 ea. on 1, 2, and 3.

 

[Roslindale]

I'm interested in 2 Faro buttons.

One of each circled

 

[Himewad]

This isn't an official group buy thread yet. No need to place any orders at this time.

 

[Huskerchipper]

I will order some Faros Dunes.
I Would also be in for 3 of each of these if the artwork is available:

 

[kaimat]

I will order some Faros Dunes.
I Would also be in for 3 of each of these if the artwork is available:View attachment 1515259View attachment 1515260

I'd be buying the Star Line DBs too.