Paulson 66.7 racks + CPC MD-50 chips (2 Viewers)

[Puggy]

Just a simple question:

Paulson 66.7 racks + CPC MD-50 chips, match or not?

All of my racks are Paulson 66.7 racks and I want to stick to the same chip racks, if possible.
Does MD-50 chips sit in well to these racks?

Thanks for the info.

-Puggy

 

[abby99]

You'll need 67.7 racks. I bought a bunch of these for my MD-50's and they're perfect:

http://www.casinodiscountsupplies.com/1067mmcastch.html

Their shipping is expensive, and I don't know whether they ship to Europe. These racks are well worth the price, IMO. These are the only racks I've seen that IMO are comparable to Paulson racks in terms of weight, thickness of the material, and overall quality. Highly recommended.

 

[Puggy]

Thanks Marsha. When I posted I thought you would be the best expert to answer for this question

 

[Puggy]

I tried to contact the company and never got any reply. Now the site seems to be closed: http://www.casinodiscountsupplies.com/
Can't connect. Any other place I could try to get them racks for me?

 

[manamongkids]

what about ordering racks right thru CPC?

 

[abby99]

I tried to contact the company and never got any reply. Now the site seems to be closed: http://www.casinodiscountsupplies.com/
Can't connect. Any other place I could try to get them racks for me?

That's a shame. Those are the best racks ever, and I haven't seen them offered for sale anywhere else. Good luck in your search.

 

[Toby]

Is this the same place?

http://www.casinosupply.com/clear-acrylic-poker-chip-rack-67-7mm-5-row-100-chip/

Similar name...

 

[Toby]

"Casino Supply currently only ships to the The United States (including Hawaii and Alaska) and Canada"

 

[BNM]

I got my CPC racks from Dennis at Key West. Perfect fit, but I have Circle-Square chips.

 

[abby99]

Is this the same place?

http://www.casinosupply.com/clear-acrylic-poker-chip-rack-67-7mm-5-row-100-chip/

Similar name...

It's not the same place. Without a photo of the bottom of the rack, it's impossible to tell whether it's the same as the racks that I bought. It has circles on the bottom center along with the numbers 67.7. The stamping is done such that it doesn't cause the rack to rock.

 

[Puggy]

Thanks again. Methinks I just have to find 67.7 mm racks. At least they should fit to those racks.

 

[Toby]

Does anyone else sell the racks that @abby99 mentions, anyone know?

 

[abby99]

I finally took a photo if the markings. These racks are great -- no rocking.

I also bought some from discount casino gear years ago. If anybody finds them . . . ya never know when I might be in the market for moar CPC chips.

 

[Gear]

The Chip Room is having a sale at the blue site right now, that includes some of these racks. They're not shiny and new but they are 67.7 mm.

 

[Toby]

The Chip Room is having a sale at the blue site right now, that includes some of these racks. They're not shiny and new but they are 67.7 mm.

Yeah - saw that. No international shipping...

 

[stocky]

what about ordering racks right thru CPC?

This??

 

[Puggy]

Yeah - saw that. No international shipping...

I am sure Jim will ship internationally, if asked nicely. If he has new 67.7 racks I can hop in with 12 racks,
if you want to pump the possible order up and then re-ship them to Finland to me.

 

[Puggy]

I can also ask David @ CPC if he has racks.

 

[Toby]

Does anyone know who sells the racks new recommended by @abby99 ?

It's the 67.7mm ones with the circle underneath:

@Puggy these were the ones

 

[Puggy]

Does anyone know who sells the racks new recommended by @abby99 ?

It's the 67.7mm ones with the circle underneath:

@Puggy these were the ones

Ok, thanks. Thomas has some PGI racks. I might try those first since they are in Europe already. If they don't fit, I'll get a bunch of these.

 

[Puggy]

I've been too lazy with these....

 

[Toby]

I've not been able to find them... : (

 

[slisk250]

There is an eBay seller who has boxes of 60 racks. I'll have to look him up. I think it is prismelectonics. I took a chance and they fit all of my Amold perfect with the exception of the bounties. That spot must have been just a hair too thick. Those racks are very tight, just how I like them. Don't know what shipping could be to the Arctic Circle but it is a potential option.

 

[Puggy]

Thanks. I'll look it up too later today.

 

[phaze12]

be careful with prisim electronics. i bought a lot and they were defective. the injection spot in the middle was raised. rendering the middle barrel useless.

 

[k9dr]

My new CPC MD-50's fit nice and tight in the PGI Chipco racks. The fracs from ASM Vegas are a little thicker and require a different rack.

 

[Puggy]

My new CPC MD-50's fit nice and tight in the PGI Chipco racks. The fracs from ASM Vegas are a little thicker and require a different rack.

Thanks. This is great info. I am about to get 10 PGI racks

 

[ChaosRock]

Thanks. This is great info. I am about to get 10 PGI racks

I hope your set fits well in those racks Pasi...

I gotta say my CPC sets do NOT fit in 67.7/Chipcos... To be more specific, some denoms DO and some don't... The same happens with my MD-50s, CIRSQRs, B-Diamond and H-Mold sets unfortunately... So not necessarily a matter of a particular mold... So 67.7 are bit too small for some denoms... Hopefully after some play they will fit well... I had to use some inexpensive racks for those sets... I cannot fit ANY CPC barrels in Paulson racks by the way (66.7) as expected...

Now, that doesn't mean the difference in barrel height is large, they are not, they are very small... However, the barrels that fit, fit really snuggly and those that do not, they do not by a very small margin...

 

[Puggy]

Yepp. That I noticed also with Paulson racks. Time to start shuffling.

 

[k9dr]

My new $5's, $20's, and $100's fit well. Some barrels were tighter than others, so I did a splash pot and mixed them up and they fit better.