• PCF is an eBay Partner. If you make a purchase through one of our links, we may earn a commission at no extra cost to you. Thank you for your support!

Wanted Micro sets .5-5$ (1 Viewer)

13 0 0
Status
Not open for further replies.
Looking for options on a good micro cash set. Can’t seem to find anything good or when I try to make orders for a custom one I get pulled around forever just to not have anything available or to be created... if I can’t find anything I might be going with the murder custom option but would like to see what’s out now

Edit:
Needs are 5c 25c $1 $5

Generally don’t get a lot on the table just nice night of cards to bs with some friends. Maybe $100-$200 at most
 
126 0 0
Where you looking for 5¢ through $5 or were you looking at 50¢ as your lowest value chip?

What about this BCC FoC (Fan of cards) set?


BCC-foc-set.jpg


BCC-foc-red-chip.jpgBCC-foc-25cent-chip.jpgBCC-foc-1-chip.jpgBCC-foc-5-chip.jpg
 
13 0 0

Attachments

  • 0FCCAB48-D223-42B3-AAF5-BA160E2DEFC7.jpeg
    0FCCAB48-D223-42B3-AAF5-BA160E2DEFC7.jpeg
    66.8 KB · Views: 108
56 0 0
Theluckyhand2 said:
5$ lowest value I’ve thought about these ones but kinda want something that’s gonna match my table a little bit more.
Click to expand...
Probably the only way you will really match your table is with full customs. That can be fairly pricey (CPC) or pretty reasonable if you go with cards mold. Plus other options in between like relabels. What is your preferred chip style (clay, ceramic, plastic, china clay) and your price range? That will help us make better suggestions.
 
13 0 0
TX_Golf_N_Poker said:
Probably the only way you will really match your table is with full customs. That can be fairly pricey (CPC) or pretty reasonable if you go with cards mold. Plus other options in between like relabels. What is your preferred chip style (clay, ceramic, plastic, china clay) and your price range? That will help us make better suggestions.
Click to expand...
I prefer clay. And at the moment don’t have a set range to pay. I’be thought about relabeling but I’d have to find someone who knows how to drill them and get some designs made up. Unfortunately I’m not exactly artistic or computer savvy
 
31 0 0
Theluckyhand2 said:
I prefer clay. And at the moment don’t have a set range to pay. I’be thought about relabeling but I’d have to find someone who knows how to drill them and get some designs made up. Unfortunately I’m not exactly artistic or computer savvy
Click to expand...
How about Key West, they had ready stock denomination from 5c

@dennis63 is one of our site vendor

all-denom.png
 
54 0 0
Theluckyhand2 said:
5$ lowest value I’ve thought about these ones but kinda want something that’s gonna match my table a little bit more.
Click to expand...
Dude! Nice friggin table and chairs.

Just to clarify, your thread title says micro set .5 to $5. Then you say smallest denom wanted is $5.

Did you mean to put 5 cents?

Are you looking for
5c, 25c, $1, $5 chips?

Also, how much money do you normally have on the table at the end of the night?

That may help determine set size.
 
69 0 0
Theluckyhand2 said:
5$ lowest value I’ve thought about these ones but kinda want something that’s gonna match my table a little bit more.
Click to expand...
Definitely a purdy table buddy... but typically don't you want the chips to contrast with the table... keep us partially color blind players in mind! Don't want chips getting lost on the table or left out of pots kinda philosophy.

Original "casino used" or "real clay" anything options for micro (down to the nickle) are quite limited. Obviously if you mean Fiddy centers... then your options grow quite a bit. Otherwise your options are really ceramics or customs.

Good luck with the Hunt!!
 
13 0 0
GenghisKhan said:
Dude! Nice friggin table and chairs.

Just to clarify, your thread title says micro set .5 to $5. Then you say smallest denom wanted is $5.

Did you mean to put 5 cents?

Are you looking for
5c, 25c, $1, $5 chips?

Also, how much money do you normally have on the table at the end of the night?

That may help determine set size.
Click to expand...
Yea that was my bad. Lowest denom is 5c highest $5. Really not sure how much get on the table probably around 100-200$. I’ll edit post
 
13 0 0
Ben8257 said:
Definitely a purdy table buddy... but typically don't you want the chips to contrast with the table... keep us partially color blind players in mind! Don't want chips getting lost on the table or left out of pots kinda philosophy.

Original "casino used" or "real clay" anything options for micro (down to the nickle) are quite limited. Obviously if you mean Fiddy centers... then your options grow quite a bit. Otherwise your options are really ceramics or customs.

Good luck with the Hunt!!
Click to expand...
I appreciate it I do love my table lol. I have had a few chips from samples get down right invisible so I’m thinking rn custom is what I’ll have to go with all around. Do you know how chips from sunfly are by chance??
 
69 0 0
Theluckyhand2 said:
I appreciate it I do love my table lol. I have had a few chips from samples get down right invisible so I’m thinking rn custom is what I’ll have to go with all around. Do you know how chips from sunfly are by chance??
Click to expand...
We only own 1 sunfly set... obviously nothing like Paulsons or anything else for that matter. But I do love them when not compared to clay chips. If that makes sense. Also you can get them in 43mm which is awesome! I have a few samples of their 39mm hybrid chips and not really a fan, but the 43s are bad ass!
20210517_170114.jpg

20210517_180532.jpg

20200908_161101.jpg

Seems like most go with cards molds nowadays mostly because of Price but really these are much better IMO as you still get an inlay rather than a printed on image.

Just played ours a couple weeks ago and still love em! But again these are 43mm
20211114_034711.jpg


If you mean their standard ceramic semi custom chips, I really have no experience with those buddy. But I would suggest this type of Sunfly chips.
 
56 0 0
Theluckyhand2 said:
Are they a plastic or ceramic. To me that’s what they look like
Click to expand...
Cards mold are ceramic, but to me they are very different from most ceramic, which I personally don't care for. They are very similar to Sun-Fly chips they call Polyclay. Ceramic chips made to emulate clay chips with a debossed mold image. Even if you don't like most ceramics, you should get your hands on a few of these and judge for yourself. MANY here on PCF who thought they would hate them, find that they like them once they handled them. Especially at their price point which is cheaper than Apache China clays. PM me if you'd like to buy a shuffle stack of samples.

Here's a write up where I describe them in detail and compare why I actually like them better than the more expensive Sun-Fly version.
https://www.pokerchipforum.com/threads/sunfly-polyclay-poker-chips.77029/post-1566675
 
Status
Not open for further replies.

Similar threads

C
  • Locked
  • Wanted Wanted
Wanted Micro Cash Set
Replies
7
Views
658
Machine
Machine
Baron_Von_Chipper
  • Locked
  • Wanted Wanted
Canceled Apache Sample sets Dunes and Pharoahs
Replies
0
Views
161
Baron_Von_Chipper
Baron_Von_Chipper
E
Optimal cash game set for $5 to $50 buyins?
Replies
3
Views
397
bruh
bruh
Elio
200 Chip Set for 4 players — $5 Buy In
Replies
13
Views
773
Colquhoun
Colquhoun
RansomWest
Hello from Nebraska!
Replies
16
Views
636
ScallyWagers
ScallyWagers
Back
Top Bottom