wonderpuddle
Full House
Those look nice with the Jacks. Planning on Jack fracs? Quarter or 50c?
Kash Casino / Full Tilt chip PRON here (1 Viewer)
- Thread starter rimmerryan
- Start date
Going with 25c. Gear inlays have been ordered!
Last edited:
At first I was doing 3 drops and letting it sit for 30 seconds. It clearly didn't soak into the edges. The last one I did was probably closer to 90 seconds after dragging the dropper around the inlay so it was uniformly wet damp looking.
So I haven't done enough to understand yet, but it looks like the purples reaction to the nail polish remover makes it pale. Or that could be my scraping. I'll oil these three that I finished and see how they turn look.
The paleness is likely from the NPR. The whole chip will lighten after cleaning which oil will fix, but it wont fix the paleness.
Do you have any high denom Jack? I was wondering how the $500 would work as a Jack $500? Maybe not so well with the primary $1k.
Can you put one of the $500 between 2 of the 100 primary? And vice versa? Thx.
Thank you very much! Looks like the 500 would get lost in the 100s pretty easily.
uclaure
Flush
I only got a measly 20 chips from this sale...had to make them count. These are my first oversized Paulsons. Already murdered. Don’t know how they’ll be used yet. Kill first, ask questions later
RainmanTrail
Straight Flush
40 down. 60 more to go... Well, until I acquire more that is.
Johnblue
Flush
Man! And to think Jim sold these as “value” chips!
Starting stacks for my next game in a week. I am very interested to see how these chips are to play with, the extra mm and the 10g weight do give them a presence. Too bad the T50s are so worn, all of the other chips came out great after a bath. Just a warning, they do smell bad. It did lessen after the ultrasonic, I also moved them to new boxes (tight fit due to size) and put a fabric softner in each box lid. It seems to have helped a lot.
I'm surprised that nobody mentioned the smell, seems worse on the Paulson $50s.
I'm surprised that nobody mentioned the smell, seems worse on the Paulson $50s.
You pay for the chips, the smell is a bonus.....
Did take labels off a rack of the 50s the other day. Labels come off very easy but adhesive on the original inlays is “lifting” at about a 10% clip
When it separates I remove the laminate from the inlay as it’s slightly raised and otherwise water will be trapped after washing. It does do a small amount of damage to the FT inlay.
In other words, if this is a potential issue for buyers I’m willing to buy your 50s
When it separates I remove the laminate from the inlay as it’s slightly raised and otherwise water will be trapped after washing. It does do a small amount of damage to the FT inlay.
In other words, if this is a potential issue for buyers I’m willing to buy your 50s
Hundreds do that really bad as wellDid take labels off a rack of the 50s the other day. Labels come off very easy but adhesive on the original inlays is “lifting” at about a 10% clip
When it separates I remove the laminate from the inlay as it’s slightly raised and otherwise water will be trapped after washing. It does do a small amount of damage to the FT inlay.
In other words, if this is a potential issue for buyers I’m willing to buy your 50s
View attachment 421467
TikiKingKing
High Hand
Attachments
warewulf
Full House
Did take labels off a rack of the 50s the other day. Labels come off very easy but adhesive on the original inlays is “lifting” at about a 10% clip
When it separates I remove the laminate from the inlay as it’s slightly raised and otherwise water will be trapped after washing. It does do a small amount of damage to the FT inlay.
In other words, if this is a potential issue for buyers I’m willing to buy your 50s
Same here. Oddly the Full Tilt inlay seems to end up with more damage.
These are really nice, just need to be murdered, cleaned, labeled. Definitely nice if you're willing to put in the work. I like that they're nicely broken in without being too worn.
I do really wonder what is the story behind these. Maybe Full Tilt was having them made and got shut down before they were shipped.
TikiKingKing
High Hand
Should I remove the laminate if I want to label over with an unlaminated Gear label?
Thanks!
Thanks!
The updated lineup. Thinking a cash set along these lines:
.25 - green
1.00 - black
5.00 - ??? Hoped blues I think thewill cause dirty stack issues with the blacks
Open to suggestions. I may need to trade off some of these chips to find something that works.
.25 - green
1.00 - black
5.00 - ??? Hoped blues I think thewill cause dirty stack issues with the blacks
Open to suggestions. I may need to trade off some of these chips to find something that works.
Did take labels off a rack of the 50s the other day. Labels come off very easy but adhesive on the original inlays is “lifting” at about a 10% clip
When it separates I remove the laminate from the inlay as it’s slightly raised and otherwise water will be trapped after washing. It does do a small amount of damage to the FT inlay.
In other words, if this is a potential issue for buyers I’m willing to buy your 50s
View attachment 421467
FortyMorty
3 of a Kind
Where is the best place to find non acetone NPL? Any brands better than another?
warewulf
Full House
Got mine at a drug store, CVS. They had the droppers too
FortyMorty
3 of a Kind
Oh sweet, do you personally use two or three drops?
jeff123
Pair
top care grocery store brand has been the only npr that has worked for me. tried a few others with no success. with these particular chips I did a full thin layer or npr. and sometimes would have to go back with seconds for some stubborn strips left over that I couldn’t get off during first go around
FortyMorty
3 of a Kind
I've got some serious work to do, thanks for the advise!
Let's see how many chips formerly known as Kash, wait Full Tilt, 50s it would take to get @Ronoh to give me a Pieces of Eight!
Kash 50s with labels removed, washed (mistake to do it here), GooGone to remove adhesive, washed again (could have just done this one, duh), Gear labels applied and oiled. Result is fracs for my Roadhouse chips. The chips were in far better shape than I had any right to expect, with the exception of a single grievously wounded soldier.
Kash 50s with labels removed, washed (mistake to do it here), GooGone to remove adhesive, washed again (could have just done this one, duh), Gear labels applied and oiled. Result is fracs for my Roadhouse chips. The chips were in far better shape than I had any right to expect, with the exception of a single grievously wounded soldier.
Great application! Love them as Roadhouse fracs.Let's see how many chips formerly known as Kash, wait Full Tilt, 50s it would take to get @Ronoh to give me a Pieces of Eight!
Kash 50s with labels removed, washed (mistake to do it here), GooGone to remove adhesive, washed again (could have just done this one, duh), Gear labels applied and oiled. Result is fracs for my Roadhouse chips. The chips were in far better shape than I had any right to expect, with the exception of a single grievously wounded soldier.
View attachment 426007
Unlabel them and make me an offerLet's see how many chips formerly known as Kash, wait Full Tilt, 50s it would take to get @Ronoh to give me a Pieces of Eight!
View attachment 426007
Create an account or login to comment
You must be a member in order to leave a comment
Create account
Create an account and join our community. It's easy!
Log in
Already have an account? Log in here.
Similar threads
- Locked
