Exclusive PCF Member Specials (40 Viewers)

We just listed on the website this 520 Casino de Isthmus City Paulson chip set that tributes the 1999 James Bond movie License to Kill.

Known as one of the most popular Paulson chips that were not used in a real casino, the CDI chips are some of the favorites among the chip collecting community.

Our 520 chip set includes the following:

200 $1 Chips
200 $5 Chips
100 $25 Chips
10 $100 Chips
10 $500 Chips

You can find more information about the set and purchase it by clicking the link below:

https://spinettisgaming.com/products/520-casino-de-isthmus-city-paulson-used-chip-set

Please note that we only have this one set.

CDI_1.jpg


CDI_3.jpg



CDI_6.jpg


@BearMetal @FordPickup92 @RocAFella1 @JeepologyOffroad @justincarothers @i'm nobody @AWenger @PGA PRO @BearMetal @guyfleegman @HaRDHouSeiNC @David O @cpac54 @ovo @Rbonus012 @mathewsarcher83 @SurfCity USA @pacmartine @ReallyGoodUsername @upNdown @Don Clay @davislane @RowdyRawhide @TKEUofM @Rieguy @juankay20 @Bluegrass Poker @cpac54 @72o @Josh Kifer @Irish @ADS Aviator @Ben8257 @sbp8984 @moordb @Pinkdan @MilouPilou1 @Grandmasturkey @RivieraDanny @dp68094 @pipdenny @DoubleBarrel @Squakmix @Stufflymcstuff @AK Chip @GianThaMan @upNdown @twonky @Mongoose @DMZ @RichMahogany @Feneck84
 

Attachments

  • CDI_6.jpg
    CDI_6.jpg
    208.9 KB · Views: 63
Last edited:
We just listed on the website this 520 Casino de Isthmus City Paulson chip set that tributes the 1999 James Bond movie License to Kill.

Known as one of the most popular Paulson chips that were not used in a real casino, the CDI chips are some of the favorites among the chip collecting community.

Our 520 chip set includes the following:

200 $1 Chips
200 $5 Chips
100 $25 Chips
20 $100 Chips
20 $500 Chips

You can find more information about the set and purchase it by clicking the link below:

https://spinettisgaming.com/products/520-casino-de-isthmus-city-paulson-used-chip-set

Please note that we only have this one set.

View attachment 849036

View attachment 849037


View attachment 849039

@BearMetal @FordPickup92 @RocAFella1 @JeepologyOffroad @justincarothers @i'm nobody @AWenger @PGA PRO @BearMetal @guyfleegman @HaRDHouSeiNC @David O @cpac54 @ovo @Rbonus012 @mathewsarcher83 @SurfCity USA @pacmartine @ReallyGoodUsername @upNdown @Don Clay @davislane @RowdyRawhide @TKEUofM @Rieguy @juankay20 @Bluegrass Poker @cpac54 @72o @Josh Kifer @Irish @ADS Aviator @Ben8257 @sbp8984 @moordb @Pinkdan @MilouPilou1 @Grandmasturkey @RivieraDanny @dp68094 @pipdenny @DoubleBarrel @Squakmix @Stufflymcstuff @AK Chip @GianThaMan @upNdown @twonky @Mongoose @DMZ @RichMahogany @Feneck84
Either your count is wrong or your picture is wrong. 520 chips pictured. 540 chips listed
 
BC Wills via Burt Co. They are light at about 8.4 g each, but feel amazing and make a great addition to a vintage themed set:

I see you have these Sahara chips in a mixed set with LGKs. How do they compare to each other in thickness and diameter? In your third pic they appear to be a little taller.

I'm looking for a chip to make into a nickel in my LGK Dragonara Palace set. These would work well in my set color wise. My LGKs are just under 9 grams so weight should be good. Also, do you think these would take a 7/8ths mill without damaging any of the mold design?
 
I see you have these Sahara chips in a mixed set with LGKs. How do they compare to each other in thickness and diameter? In your third pic they appear to be a little taller.

I'm looking for a chip to make into a nickel in my LGK Dragonara Palace set. These would work well in my set color wise. My LGKs are just under 9 grams so weight should be good. Also, do you think these would take a 7/8ths mill without damaging any of the mold design?
The Sahara chips are new old stock, so they are crisp and minty. Meanwhile, the LGKs and diamond molds have seen a bit of use. I think that's the difference in the stack sizes that you're seeing.

Thickness is roughly the same at 3.3mm for both the LGKs and SGK's. For diameter, the SGKs are about 0.3mm smaller clocking in at 39.3mm compared to the 39.6mm of the LGKs. However, I don't find this very noticeable when I'm handling them. There's definitely a much larger difference between say my C&J chips which are 40 mm compared to Paulson's at 39 mm.

Weight wise, yes if you are hovering just under 9g, then the Sahara should fit right in since they weigh in at about 8.3g.

As far as milling, the inside ring is roughly 1 1/32" in diameter. The stamp is definitely smaller than 7/8 of an inch, so I think that is 7/8 inch mill might work:

PXL_20220120_035624094.MP.jpg
 
The Sahara chips are new old stock, so they are crisp and minty. Meanwhile, the LGKs and diamond molds have seen a bit of use. I think that's the difference in the stack sizes that you're seeing.

Thickness is roughly the same at 3.3mm for both the LGKs and SGK's. For diameter, the SGKs are about 0.3mm smaller clocking in at 39.3mm compared to the 39.6mm of the LGKs. However, I don't find this very noticeable when I'm handling them. There's definitely a much larger difference between say my C&J chips which are 40 mm compared to Paulson's at 39 mm.

Weight wise, yes if you are hovering just under 9g, then the Sahara should fit right in since they weigh in at about 8.3g.

As far as milling, the inside ring is roughly 1 1/32" in diameter. The stamp is definitely smaller than 7/8 of an inch, so I think that is 7/8 inch mill might work:

View attachment 849124
Thanks for all the details! If you still have your caliper out, what's the height of a barrel of the Saharas? My 25 cent LGK chips are excellent to near mint and a barrel measures 67.5mm. So might be even closer in height than your well used LGKs.
 
Thanks for all the details! If you still have your caliper out, what's the height of a barrel of the Saharas? My 25 cent LGK chips are excellent to near mint and a barrel measures 67.5mm. So might be even closer in height than your well used LGKs.
The first barrel gave me a measurement of 67.5 mm, another barrel measured 68.0 mm.
 
Some of you have recently inquired about our remaining $5 Dunes uncirculated warped chips.

Here is a picture of what we have in remaining inventory below.

We have sold a few from the last week and that's why the quantity is higher.

The remaining quantity is 42.

If any of you are interested in buying any, they can be purchased at the link below. This is the end of an era for us on the $5 chips for uncirculated condition:

https://spinettisgaming.com/product...chip-uncirculated?_pos=8&_sid=0ba53aed0&_ss=r



IMG_8318.jpg


@BearMetal @FordPickup92 @RocAFella1 @JeepologyOffroad @justincarothers @i'm nobody @AWenger @PGA PRO @BearMetal @guyfleegman @HaRDHouSeiNC @David O @cpac54 @ovo @Rbonus012 @mathewsarcher83 @SurfCity USA @pacmartine @ReallyGoodUsername @upNdown @Don Clay @davislane @RowdyRawhide @TKEUofM @Rieguy @juankay20 @Bluegrass Poker @cpac54 @72o @Josh Kifer @Irish @ADS Aviator @Ben8257 @sbp8984 @moordb @Pinkdan @MilouPilou1 @Grandmasturkey @RivieraDanny @dp68094 @pipdenny @DoubleBarrel @Squakmix @Stufflymcstuff @AK Chip @GianThaMan @upNdown @twonky @Mongoose @DMZ @RichMahogany @Feneck84
 
We know you guys love starbursts!

Just added two new colors to the website. Very nice condition chips, they may have some glue/tape residue on the sides. Get them while you can!

View attachment 884710View attachment 884711

https://spinettisgaming.com/products/paulson-light-blue-color-starburst-chip

https://spinettisgaming.com/products/paulson-royal-red-color-starburst-chip
Would it be possible to get a pic of the blues in a rack showing the edge condition.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account and join our community. It's easy!

Log in

Already have an account? Log in here.

Back
Top Bottom