GB Completed December 2022 Cards Mold/No-Mold Group Buy (3 Viewers)

Status
Not open for further replies.
Bally’s came in today. The no mold, matte finish chips are really nice! Love the shaped inserts and faux-relief “Bally’s” mold.

Pics first, comments after.

7117A3B8-7851-4739-8CA0-9DCC8A68E9D9.jpeg

B3D4CA5B-7057-4ADF-95DA-8C3546402E2D.jpeg

F2B522E3-48B8-4C08-AD0A-ECC5D9DA09D7.jpeg

A8ECF5D0-75CF-46E3-972E-AD779A8A65F1.jpeg

0E7120CF-DD67-4F49-BCF5-E49469A19D68.jpeg

BD46C01C-49E7-4567-85A2-8714886A1F72.jpeg

23960AE8-CA05-4818-909E-59EA82A690A1.jpeg

76E9E966-8BBE-4D53-93DF-0DB7F6FE7F64.jpeg

CAAB2AD9-798A-4BE2-9A9F-6956A4F55051.jpeg

DD5950F8-A0F2-4FE2-9379-101C58EFAF3D.jpeg

6B66A873-781F-48EA-9A38-38855AF42129.jpeg


These particular chips are a bit “muted” in color, not bright or intense… not complaining, just explaining for those looking to order in the future. I’m not sure if that’s due to final color selection (by Tina) or the matte finish chip itself.
Note that the lines visible on super closeup can’t be seen when looking at them with the naked eye. You can get a very faint “zing” sound by rubbing the back of your fingernail across the chip (going across the edges).

Note: these chips are just a bit thicker than the cards mold chips (ie. my Aria tribute chips). A barrel of 20 chips measure out just over 67mm (67.2 - 67.4mm for mine)

Because of that they don’t fit well in the 66.7mm racks I use for the Arias. Sometimes I can get a row of 20 in tight, other times I’m 1 chip short (see pics). I’ll need to pick up some 67.7mm racks for these.

Very happy with these and looking forward to felting them. Thanks for all your hard work @justincarothers

Edit:
Also, I’ve got some extras if anyone is looking to fill out any small “add ons” to their order… if interested, PM me.

@SmockKnives @JJsCasino — you wanted to see some pics of these.
 
Last edited:
Bally’s came in today. The no mold, matte finish chips are really nice! Love the shaped inserts and faux-relief “Bally’s” mold.

Pics first, comments after.

View attachment 1091208
View attachment 1091209
View attachment 1091210
View attachment 1091212
View attachment 1091211
View attachment 1091213
View attachment 1091214
View attachment 1091215
View attachment 1091216
View attachment 1091217
View attachment 1091218

These particular chips are a bit “muted” in color, not bright or intense… not complaining, just explaining for those looking to order in the future. I’m not sure if that’s due to final color selection (by Tina) or the matte finish chip itself.
Note that the lines visible on super closeup can’t be seen when looking at them with the naked eye. You can get a very faint “zing” sound by rubbing the back of your fingernail across the chip (going across the edges).

Note: these chips are just a bit thicker than the cards mold chips (ie. my Aria tribute chips). A barrel of 20 chips measure out just over 67mm (67.2 - 67.4mm for mine)

Because of that they don’t fit well in the 66.7mm racks I use for the Arias. Sometimes I can get a row of 20 in tight, other times I’m 1 chip short (see pics). I’ll need to pick up some 67.7mm racks for these.

Very happy with these and looking forward to felting them. Thanks for all your hard work @justincarothers

Also, I’ve got some extras if anyone is looking to fill out any small “add ons” to their order… if interested, PM me.
View attachment 1091225


@SmockKnives @JJsCasino — you wanted to see some pics of these.
Thank you!! Love the textured look. I’m interested in doing a cash set of the Ballys at some point with the $20 instead of the $25. So if anyone has pics of the small denominations, I’d love to see those as well:)
 
Thank you!! Love the textured look. I’m interested in doing a cash set of the Ballys at some point with the $20 instead of the $25. So if anyone has pics of the small denominations, I’d love to see those as well:)

Excuse the shadow, but here's a look at the lower denoms

oenP9NsOgFJBR8fx-M8VTa_1seWHI1GEPad1nBB2g6KJgioG6qKia6Is-JAzXhMsJ--gSLIBbrPkdhsIksCwEEfO4y6DWRfOmNZJl48tsokygmpnUFTirKqTt7Xu1A-oqvT8Ia6GruPIUTboX2wlMwTIxsca_9sJDnvbjQ9bq5t95KCNwGVu4zvb4m1g3bl_eC9R7W6A1zn-DpTrCKpP5_Ok2rGCWHOEPYcoJ1WkJHwBS0Bhj7CNyIroYnpV9FK6e5Hr1ngbVaLeexKRuZ8hO9t6TWU1ud_zc1Uuft1Vx0leK2W4TBC3Vyo6rz6PHCw0oBNW2S1iHkyq0ee8TkdLKIeZ1RMk5M4BFRubesi9FrPtVi6YW5ga2m1A2NEbaqyyaMYFe7Rg7tZQ0-pw8GVfM3jNNyWYrhSjEAhtCACujFimS4M0AdvZs5Ua1TFC5SQ2ZDLWCgQlRhJm9t1e2MYewnv_-V8zHoMW4FGy6qk1vIZ7Mj1ixdDfXGw789zMi0z-4nHmSOCQXgynZNumOvafDru373N9CiiJbQEyQjhi8DN_oe9fRk-kSdKsvIkumeB9U3IKMK1oaCCcJ-nDxXAJsvDG71SFneKCg6CqylqEbtZmOvFe05xgmDxHHArnNdq5RejB-W22WK4a4aRWuf2UM00MuUO62jmnqxwCpS5jv6zIdpmmM4Ajv0qZN2mJbe_o5xZYKem0SrFvQFOj_IQGx2ZgdWLTBdGGhNRsBBhjWhTdj3c-4tsUOqbtFpgpmGh610PYdlGXafohPMIel_pE8AFECX59oqOaKFgrrDmkcL-uhMuCGfLqjDAaQJ0x8mXpTfGtpsHp7tw-Nr0UwquVEAhV0BmZSTx0rwlw17e1iFFMGMeKU-cuF_ZB4Z0O4hN0Ls6p088G8AaCrqtY21X3jUArCkdRmTnlQeSXRDzIroeUp4JrZnOY-FJui7BFSZ1_k35ZUbFrc3ofQiJiK_vU0xiLq2LkR9BeDLj4KE7A3lct5w=w1730-h1297-no
 
1677828775966.png

1677829295766.png


4486FF17-F6CA-4AAC-96FB-4AD640C66785.jpeg

Happy birthday to me!! I absolutely love the Flamingo chips, the colors pop so nicely! And the Sunset Beach are beautiful too. I will say if you are unsure between cards mold and no mold, go with the cards mold - they stack beautifully and the no-mold have many more spinners. The Mirage and Bally's also look great, I just think the cards mold are feel much better. Would absolutely buy these again, thank you for making it all happen @justincarothers!!
 
Bally’s came in today. The no mold, matte finish chips are really nice! Love the shaped inserts and faux-relief “Bally’s” mold.

Pics first, comments after.

View attachment 1091208
View attachment 1091209
View attachment 1091210
View attachment 1091212
View attachment 1091211
View attachment 1091213
View attachment 1091214
View attachment 1091215
View attachment 1091216
View attachment 1091217
View attachment 1091218

These particular chips are a bit “muted” in color, not bright or intense… not complaining, just explaining for those looking to order in the future. I’m not sure if that’s due to final color selection (by Tina) or the matte finish chip itself.
Note that the lines visible on super closeup can’t be seen when looking at them with the naked eye. You can get a very faint “zing” sound by rubbing the back of your fingernail across the chip (going across the edges).

Note: these chips are just a bit thicker than the cards mold chips (ie. my Aria tribute chips). A barrel of 20 chips measure out just over 67mm (67.2 - 67.4mm for mine)

Because of that they don’t fit well in the 66.7mm racks I use for the Arias. Sometimes I can get a row of 20 in tight, other times I’m 1 chip short (see pics). I’ll need to pick up some 67.7mm racks for these.

Very happy with these and looking forward to felting them. Thanks for all your hard work @justincarothers

Also, I’ve got some extras if anyone is looking to fill out any small “add ons” to their order… if interested, PM me.
View attachment 1091225


@SmockKnives @JJsCasino — you wanted to see some pics of these.
Thanks, just got mine yesterday. I'm a little on the fence about the color. I may or may not keep them.
 
Status
Not open for further replies.
Back
Top Bottom