For Sale Cut Cards (and Dealer Buttons!) for Imperial Pacific Saipan (IPS) (1 Viewer)

Status
Not open for further replies.
I’ve been really excited for the Imperial Pacific Saipan chips and plaques that @horseshoez and @davislane are selling (tomorrow!), so much so that I was inspired to create cut cards for the set:

IMG_1508.jpeg

(Only one design is available for each size, bridge and poker, but as I am wont to do, the design consists of different artwork on each side for max versatility!)

I designed and had them made on my own dime. These are not officially endorsed by David and Zaki. I did show them afterwards, and they are good with me offering them to the PCF community. Think of these as fan tributes for this new set!

The cut cards are $1.75 each.

Quantities are limited since I didn’t know how much demand there would be. I’d like to limit orders to 10 cut cards of each size (20 cut cards max), to allow the most # of people to get in on them. If demand is not very high, then I may open it up to larger quantities. (I know some folks like to get 10-20 of their preferred size.)

Shipping is as follows for U.S. members:

1-3 cut cards will be mailed in a stamped letter envelope, First Class service, without tracking, for $1.50.

4-6 cut cards will be mailed in a stamped letter envelope (with extra postage), First Class service, without tracking, for $2.

7-20 cut cards will be shipped in a padded envelope, Ground Advantage, with tracking, for $6.

(You can get tracking on 1-6 cut cards by paying for Ground Advantage, but it’s probably not worth it. Only reason I have to use GA for 7+ cut cards is because that many cards makes an envelope too rigid for First Class service.)

For international members: For 1-3 cut cards it's $2.50, for 4-6 cut cards it's $4 $5 (going over 1oz was more expensive than I originally estimated).

For higher quantities: I can probably ship up to 9 cut cards internationally for $10. No tracking for these though. And I can probably ship up to 20 cut cards internationally for $16 with tracking.

Please post how many of each size you'd like to order and I will PM you with payment info!

 
Last edited:
I'm essentially sold out of the bridge-size (have ~10 left and hadn't set any aside for myself yet), and I have maybe 2 dozen poker-size remaining. Been working on a couple other designs, expanding on the member card inspiration and making it look like a real member card complete with faux "magnetic" stripe on the back side:

View attachment 1523016

These are poker-size but I'd also offer bridge-size too if I run these. The back text is based on the real member card text. Close-up of the front/back:

View attachment 1523019
(As you can see, the faux Member # on the original design, and on these, was a little Easter Egg. That's the actual Imperial Club hotline number.)


Been also working on something based on the plaques in the set, and came up with a billion dollar "plaque" cut card design, same art on each side:

View attachment 1523020

Would anyone be interested in any of these cut cards? If so, please comment below with your interest, something like:

Green CC - 2 bridge, 2 poker
Red CC - 4 bridge, 2 poker
Purple CC - 8 bridge, 4 poker
Gold CC - 2 bridge, 2 poker
Plaque CC - 8 bridge, 8 poker

Since there are multiple designs, I doubt I'll get a high quantity of any particular one, so likely the cost might be a bit more than the original single design. Also, USPS is raising postage rates next month. So assume the cut cards will cost $2-2.50 each, and that shipping might be 50¢-$1 more.


Also, since the 60mm ceramic DB GB isn't running, I may try to order the IPS buttons myself directly from BR Pro:

View attachment 1523023

Please also comment with interest on # of DBs of each color, for example:

Black DB - 3
White DB - 3

We need at least 9 of a particular color to get the edge stripe printing. For pricing, let's say $9 per dealer button (we won't get the bulk discount from a big group order like we would have with the GB, and I am including a modest design fee) before shipping.

Again, not sure if any of these will go; been a little burnt out from shipping IPS and Faro Dunes cut cards as well as Dal Negro and Fournier decks. But if there's a lot of interest, after I take a small break, I'll seriously consider running them. So comment below with your interest, and we'll see!
 
[Not sure what happened to the images in my last post; apologies for the repost.]

I'm essentially sold out of the bridge-size (have ~10 left and hadn't set any aside for myself yet), and I have maybe 2 dozen poker-size remaining. Been working on a couple other designs, expanding on the member card inspiration and making it look like a real member card complete with faux "magnetic" stripe on the back side:

1750184257871.png


These are poker-size but I'd also offer bridge-size too if I run these. The back text is based on the real member card text. Close-up of the front/back:
1750184413038.png



(As you can see, the faux Member # on the original design, and on these, was a little Easter Egg. That's the actual Imperial Club hotline number.)


Been also working on something based on the plaques in the set, and came up with a billion dollar "plaque" cut card design, same art on each side:
1750184445693.png


Would anyone be interested in any of these cut cards? If so, please comment below with your interest, something like:

Green CC - 2 bridge, 2 poker
Red CC - 4 bridge, 2 poker
Purple CC - 8 bridge, 4 poker
Gold CC - 2 bridge, 2 poker
Plaque CC - 8 bridge, 8 poker

Since there are multiple designs, I doubt I'll get a high quantity of any particular one, so likely the cost might be a bit more than the original single design. Also, USPS is raising postage rates next month. So assume the cut cards will cost $2-2.50 each, and that shipping might be 50¢-$1 more.


Also, since the 60mm ceramic DB GB isn't running, I may try to order the IPS buttons myself directly from BR Pro:
1750184507697.png


Please also comment with interest on # of DBs of each color, for example:

Black DB - 3
White DB - 3

We need at least 9 of a particular color to get the edge stripe printing. For pricing, let's say $9 per dealer button (we won't get the bulk discount from a big group order like we would have with the GB, and I am including a modest design fee) before shipping.

Again, not sure if any of these will go; been a little burnt out from shipping IPS and Faro Dunes cut cards as well as Dal Negro and Fournier decks. But if there's a lot of interest, after I take a small break, I'll seriously consider running them. So comment below with your interest, and we'll see!
 
Green CC - 1 bridge, 1 poker
Red CC - 1 bridge, 1 poker
Purple CC - 1 bridge, 1 poker
Gold CC - 1 bridge, 1 poker
Plaque CC - 2 bridge, 2 poker

Black DB - 1
White DB - 1
 
Green CC - 2 bridge, 2 poker
Red CC - 2 bridge, 2 poker
Purple CC - 2 bridge, 2 poker
Gold CC - 2 bridge, 2 poker

Black DB - 2
White DB - 2
 
Green CC - 2 bridge, 2 poker
Red CC - 2 bridge, 2 poker
Purple CC - 2 bridge, 2 poker
Gold CC - 2 bridge, 2 poker
Plaque CC - 2 bridge, 2 poker

Black DB - 4
White DB - 4
 
Green CC - 1 bridge, 1 poker
Red CC - 1 bridge, 1 poker
Purple CC - 1 bridge, 1 poker
Gold CC - 1 bridge, 1 poker

Black DB - 1
White DB - 1
 
Green CC - 1 bridge, 1 poker
Red CC - 1 bridge, 1 poker
Purple CC - 1 bridge, 1 poker
Gold CC - 2 bridge, 2 poker
Plaque CC - 2 bridge, 2 poker

Black DB - 2
White DB - 2
 
Green CC - 2 bridge, 2 poker
Red
CC - 2 bridge, 2 poker
Purple
CC - 2 bridge, 2 poker
Gold
CC - 2 bridge, 2 poker
Plaque
CC - 2 bridge, 2 poker

Black DB - 2
White DB - 2

All my Best Jeff :)
 
FYI - For those who'd prefer the 80mm acrylic, I'll be making this double-sided design available in Justin's latest GB: https://www.pokerchipforum.com/thre...giant-80mm-x-20mm-acrylic-august-2025.134044/

1751561775390.png


And I will be moving forward with getting the 60mm ceramic buttons in black and in white (same design on each side) made soon. Those should take less than a month, so I should be able to get them in your hands in August (as opposed to the 80mm acrylic DB GB won't close until August and then it'll take another 2.5-3 months for them to be made/shipped/reshipped, so probably not until October).

For the folks who commented with # of white and/or black DBs, if you want to adjust your numbers down on the 60mm ceramic DBs due to the acrylic option (or just from changing your mind), please comment! I'll order the ceramic ones based on the numbers in this thread.
 
Status
Not open for further replies.

Seller

Joined
Messages
6,284
Location
Los Angeles, CA

More ads from TheOffalo

Back
Top Bottom