-
PCF is an Amazon Associate and an eBay Partner. If you make a purchase through one of our links, we may earn a commission at no extra cost to you. Thank you for your support!
For Sale Cut Cards (and Dealer Buttons!) for Imperial Pacific Saipan (IPS) (3 Viewers)
- Thread starter TheOffalo
- Start date
twosevenbluff
Sitting Out
3 poker sized please!
twosevenbluff
Sitting Out
Got mine today! quick turnaround!
Got mine yesterday. More stunning in person! Thank you!
- Joined
- Jan 18, 2021
- Messages
- 1,537
- Reaction score
- 2,249
Faster than expected from the other side of the world. Looks great feels great! Thanks for doing this @TheOffalo !
Pokerdogs10
Sitting Out
2 Poker and 1 Bridge….Please.
Jeevansluck
Royal Flush
OP
OP
Not too bad with the postal strike!
Pokerdogs10
Sitting Out
Just got it and really nice cut cards! I’m giving thumb up !
OP
OP
I'm essentially sold out of the bridge-size (have ~10 left and hadn't set any aside for myself yet), and I have maybe 2 dozen poker-size remaining. Been working on a couple other designs, expanding on the member card inspiration and making it look like a real member card complete with faux "magnetic" stripe on the back side:
View attachment 1523016
These are poker-size but I'd also offer bridge-size too if I run these. The back text is based on the real member card text. Close-up of the front/back:
View attachment 1523019
(As you can see, the faux Member # on the original design, and on these, was a little Easter Egg. That's the actual Imperial Club hotline number.)
Been also working on something based on the plaques in the set, and came up with a billion dollar "plaque" cut card design, same art on each side:
View attachment 1523020
Would anyone be interested in any of these cut cards? If so, please comment below with your interest, something like:
Green CC - 2 bridge, 2 poker
Red CC - 4 bridge, 2 poker
Purple CC - 8 bridge, 4 poker
Gold CC - 2 bridge, 2 poker
Plaque CC - 8 bridge, 8 poker
Since there are multiple designs, I doubt I'll get a high quantity of any particular one, so likely the cost might be a bit more than the original single design. Also, USPS is raising postage rates next month. So assume the cut cards will cost $2-2.50 each, and that shipping might be 50¢-$1 more.
Also, since the 60mm ceramic DB GB isn't running, I may try to order the IPS buttons myself directly from BR Pro:
View attachment 1523023
Please also comment with interest on # of DBs of each color, for example:
Black DB - 3
White DB - 3
We need at least 9 of a particular color to get the edge stripe printing. For pricing, let's say $9 per dealer button (we won't get the bulk discount from a big group order like we would have with the GB, and I am including a modest design fee) before shipping.
Again, not sure if any of these will go; been a little burnt out from shipping IPS and Faro Dunes cut cards as well as Dal Negro and Fournier decks. But if there's a lot of interest, after I take a small break, I'll seriously consider running them. So comment below with your interest, and we'll see!
View attachment 1523016
These are poker-size but I'd also offer bridge-size too if I run these. The back text is based on the real member card text. Close-up of the front/back:
View attachment 1523019
(As you can see, the faux Member # on the original design, and on these, was a little Easter Egg. That's the actual Imperial Club hotline number.)
Been also working on something based on the plaques in the set, and came up with a billion dollar "plaque" cut card design, same art on each side:
View attachment 1523020
Would anyone be interested in any of these cut cards? If so, please comment below with your interest, something like:
Green CC - 2 bridge, 2 poker
Red CC - 4 bridge, 2 poker
Purple CC - 8 bridge, 4 poker
Gold CC - 2 bridge, 2 poker
Plaque CC - 8 bridge, 8 poker
Since there are multiple designs, I doubt I'll get a high quantity of any particular one, so likely the cost might be a bit more than the original single design. Also, USPS is raising postage rates next month. So assume the cut cards will cost $2-2.50 each, and that shipping might be 50¢-$1 more.
Also, since the 60mm ceramic DB GB isn't running, I may try to order the IPS buttons myself directly from BR Pro:
View attachment 1523023
Please also comment with interest on # of DBs of each color, for example:
Black DB - 3
White DB - 3
We need at least 9 of a particular color to get the edge stripe printing. For pricing, let's say $9 per dealer button (we won't get the bulk discount from a big group order like we would have with the GB, and I am including a modest design fee) before shipping.
Again, not sure if any of these will go; been a little burnt out from shipping IPS and Faro Dunes cut cards as well as Dal Negro and Fournier decks. But if there's a lot of interest, after I take a small break, I'll seriously consider running them. So comment below with your interest, and we'll see!
OP
OP
[Not sure what happened to the images in my last post; apologies for the repost.]
I'm essentially sold out of the bridge-size (have ~10 left and hadn't set any aside for myself yet), and I have maybe 2 dozen poker-size remaining. Been working on a couple other designs, expanding on the member card inspiration and making it look like a real member card complete with faux "magnetic" stripe on the back side:
These are poker-size but I'd also offer bridge-size too if I run these. The back text is based on the real member card text. Close-up of the front/back:
(As you can see, the faux Member # on the original design, and on these, was a little Easter Egg. That's the actual Imperial Club hotline number.)
Been also working on something based on the plaques in the set, and came up with a billion dollar "plaque" cut card design, same art on each side:
Would anyone be interested in any of these cut cards? If so, please comment below with your interest, something like:
Green CC - 2 bridge, 2 poker
Red CC - 4 bridge, 2 poker
Purple CC - 8 bridge, 4 poker
Gold CC - 2 bridge, 2 poker
Plaque CC - 8 bridge, 8 poker
Since there are multiple designs, I doubt I'll get a high quantity of any particular one, so likely the cost might be a bit more than the original single design. Also, USPS is raising postage rates next month. So assume the cut cards will cost $2-2.50 each, and that shipping might be 50¢-$1 more.
Also, since the 60mm ceramic DB GB isn't running, I may try to order the IPS buttons myself directly from BR Pro:
Please also comment with interest on # of DBs of each color, for example:
Black DB - 3
White DB - 3
We need at least 9 of a particular color to get the edge stripe printing. For pricing, let's say $9 per dealer button (we won't get the bulk discount from a big group order like we would have with the GB, and I am including a modest design fee) before shipping.
Again, not sure if any of these will go; been a little burnt out from shipping IPS and Faro Dunes cut cards as well as Dal Negro and Fournier decks. But if there's a lot of interest, after I take a small break, I'll seriously consider running them. So comment below with your interest, and we'll see!
I'm essentially sold out of the bridge-size (have ~10 left and hadn't set any aside for myself yet), and I have maybe 2 dozen poker-size remaining. Been working on a couple other designs, expanding on the member card inspiration and making it look like a real member card complete with faux "magnetic" stripe on the back side:
These are poker-size but I'd also offer bridge-size too if I run these. The back text is based on the real member card text. Close-up of the front/back:
(As you can see, the faux Member # on the original design, and on these, was a little Easter Egg. That's the actual Imperial Club hotline number.)
Been also working on something based on the plaques in the set, and came up with a billion dollar "plaque" cut card design, same art on each side:
Would anyone be interested in any of these cut cards? If so, please comment below with your interest, something like:
Green CC - 2 bridge, 2 poker
Red CC - 4 bridge, 2 poker
Purple CC - 8 bridge, 4 poker
Gold CC - 2 bridge, 2 poker
Plaque CC - 8 bridge, 8 poker
Since there are multiple designs, I doubt I'll get a high quantity of any particular one, so likely the cost might be a bit more than the original single design. Also, USPS is raising postage rates next month. So assume the cut cards will cost $2-2.50 each, and that shipping might be 50¢-$1 more.
Also, since the 60mm ceramic DB GB isn't running, I may try to order the IPS buttons myself directly from BR Pro:
Please also comment with interest on # of DBs of each color, for example:
Black DB - 3
White DB - 3
We need at least 9 of a particular color to get the edge stripe printing. For pricing, let's say $9 per dealer button (we won't get the bulk discount from a big group order like we would have with the GB, and I am including a modest design fee) before shipping.
Again, not sure if any of these will go; been a little burnt out from shipping IPS and Faro Dunes cut cards as well as Dal Negro and Fournier decks. But if there's a lot of interest, after I take a small break, I'll seriously consider running them. So comment below with your interest, and we'll see!
Green CC - 2 bridge, 2 poker
Red CC - 2 bridge, 2 poker
Purple CC - 2 bridge, 2 poker
Gold CC - 2 bridge, 2 poker
Plaque CC - 2 bridge, 2 poker
Black DB - 4
White DB - 4
Red CC - 2 bridge, 2 poker
Purple CC - 2 bridge, 2 poker
Gold CC - 2 bridge, 2 poker
Plaque CC - 2 bridge, 2 poker
Black DB - 4
White DB - 4
Green CC - 2 bridge, 2 poker
Red CC - 2 bridge, 2 poker
Purple CC - 2 bridge, 2 poker
Gold CC - 2 bridge, 2 poker
Plaque CC - 2 bridge, 2 poker
Black DB - 2
White DB - 2
All my Best Jeff
Red CC - 2 bridge, 2 poker
Purple CC - 2 bridge, 2 poker
Gold CC - 2 bridge, 2 poker
Plaque CC - 2 bridge, 2 poker
Black DB - 2
White DB - 2
All my Best Jeff
OP
OP
FYI - For those who'd prefer the 80mm acrylic, I'll be making this double-sided design available in Justin's latest GB: https://www.pokerchipforum.com/thre...giant-80mm-x-20mm-acrylic-august-2025.134044/
And I will be moving forward with getting the 60mm ceramic buttons in black and in white (same design on each side) made soon. Those should take less than a month, so I should be able to get them in your hands in August (as opposed to the 80mm acrylic DB GB won't close until August and then it'll take another 2.5-3 months for them to be made/shipped/reshipped, so probably not until October).
For the folks who commented with # of white and/or black DBs, if you want to adjust your numbers down on the 60mm ceramic DBs due to the acrylic option (or just from changing your mind), please comment! I'll order the ceramic ones based on the numbers in this thread.
And I will be moving forward with getting the 60mm ceramic buttons in black and in white (same design on each side) made soon. Those should take less than a month, so I should be able to get them in your hands in August (as opposed to the 80mm acrylic DB GB won't close until August and then it'll take another 2.5-3 months for them to be made/shipped/reshipped, so probably not until October).
For the folks who commented with # of white and/or black DBs, if you want to adjust your numbers down on the 60mm ceramic DBs due to the acrylic option (or just from changing your mind), please comment! I'll order the ceramic ones based on the numbers in this thread.
Create an account or login to comment
You must be a member in order to leave a comment
Create account
Create an account and join our community. It's easy!
Log in
Already have an account? Log in here.
Similar threads
