Wanted to provide everyone with a quick update on the current status of milling as well as any new info that has been updated since my first post back in April! Happy to say that things have been running smoothly and happy that the community has been so receptive. After a few months under my belt I wanted to provide a list of updated service and as well potential upcoming things in the works.
I have been milling a variety of new chips outside of just Paulsons and the results have been great thus far. I'm available to mill other manufacturers and if I see any potential issues I will always let you know before shipment or mill process begins.
Pricing will remain the same for milling of any chips at $0.50/chip which will include a quick rinse after to help remove as much residue as possible from the milling.
Current leadtime is still 1-2 weeks turnaround once I receive the chips.
Some disclaimers I wanted to mention in regards to certain chips that I've ran across thus far that you should be aware of:
- Starburst THC chips will not always mill off completely clean due to the misalignment of the stamps and chip tolerances. Some will come off completely clean while others might have specs leftover near the edges. I can provide photo examples if needed.
- Other manufactured chips (like Greek Keys) are a bit more brittle than your standard Paulson. I managed to mill quite a large quantity but would estimate that there is a typical loss of chips of about 1% due to them snapping in half during the process.
- Milling inlayed chips. These are really case by case bases. They are a bit tricky as due to the hardness of the inlay they are more prone to damage as well as leaving leftover inlay. Some are easier than others so please reach out to discuss and if you are ok with the risks we can proceed.
Additional Services:
Applying Your Labels - $20/rack
Chip Flattening - $15/rack
(Coming Soon) Deep Ultrasonic Chip Cleaning - working on getting a Vevor to help provide any deep cleaning for those interested. Should have by end of the month.
I get many questions too about inlay removal services. Currently I do not plan on adding this service due to the time and headaches endured thus far in my attempts. Perhaps in the future but as of now I do not have plans to.
And as always, the same typical disclaimers as the beginning repeated below
Return shipping costs will be required, I can provide real time quotes after milling for expedite or standard shipping (plus insurance if necessary)
I will not be held responsible for lost packages by the postal service so please insure if you're worried about the big bad postman
I will not be held responsible for any chips damaged during my milling process. If any damage does occur I will promptly reach out to discuss continuation of service and assess any damage. I know how much we love and care for our chips so I promise to do everything I can to mitigate these types of issues. Also make sure that you're sending me chips that you indeed want milled and nothing more.
Any unpaid orders 45 days after completion will be sold to help recoup costs.
Thanks to everyone who has given me a chance and even helped me learn along the way!
I have been milling a variety of new chips outside of just Paulsons and the results have been great thus far. I'm available to mill other manufacturers and if I see any potential issues I will always let you know before shipment or mill process begins.
Pricing will remain the same for milling of any chips at $0.50/chip which will include a quick rinse after to help remove as much residue as possible from the milling.
Current leadtime is still 1-2 weeks turnaround once I receive the chips.
Some disclaimers I wanted to mention in regards to certain chips that I've ran across thus far that you should be aware of:
- Starburst THC chips will not always mill off completely clean due to the misalignment of the stamps and chip tolerances. Some will come off completely clean while others might have specs leftover near the edges. I can provide photo examples if needed.
- Other manufactured chips (like Greek Keys) are a bit more brittle than your standard Paulson. I managed to mill quite a large quantity but would estimate that there is a typical loss of chips of about 1% due to them snapping in half during the process.
- Milling inlayed chips. These are really case by case bases. They are a bit tricky as due to the hardness of the inlay they are more prone to damage as well as leaving leftover inlay. Some are easier than others so please reach out to discuss and if you are ok with the risks we can proceed.
Additional Services:
Applying Your Labels - $20/rack
Chip Flattening - $15/rack
(Coming Soon) Deep Ultrasonic Chip Cleaning - working on getting a Vevor to help provide any deep cleaning for those interested. Should have by end of the month.
I get many questions too about inlay removal services. Currently I do not plan on adding this service due to the time and headaches endured thus far in my attempts. Perhaps in the future but as of now I do not have plans to.
And as always, the same typical disclaimers as the beginning repeated below
Return shipping costs will be required, I can provide real time quotes after milling for expedite or standard shipping (plus insurance if necessary)
I will not be held responsible for lost packages by the postal service so please insure if you're worried about the big bad postman
I will not be held responsible for any chips damaged during my milling process. If any damage does occur I will promptly reach out to discuss continuation of service and assess any damage. I know how much we love and care for our chips so I promise to do everything I can to mitigate these types of issues. Also make sure that you're sending me chips that you indeed want milled and nothing more.
Any unpaid orders 45 days after completion will be sold to help recoup costs.
Thanks to everyone who has given me a chance and even helped me learn along the way!
Last edited:
