Graded98
New Member
With these no mold chips is it still possible to have the Mr Burns label on it? Or are these non mold chips made different? Just trying to figure out a good long term set.
-
PCF is an Amazon Associate and an eBay Partner. If you make a purchase through one of our links, we may earn a commission at no extra cost to you. Thank you for your support!
Preorder CHIPS* WEB, JESTER, GREEK, SUN, TANGIERS* AUGUST 2025 (6 Viewers)
- Thread starter justincarothers
- Start date
OP
OP
No these come as is on a textured no mold chip. You would need custom art work if you wanted the Burns set modified and on a textured no mold chip
Unless there's a very specific reason you want no mold - you don't want no mold. Spend the little extra on the hybrids (would highly recommend the Web mold, but dealer's choice). You won't regret it.
What are your thoughts on Greek mold vs web mold? My samples should be coming in soon but I really like the look of both
I’m an expert by no means, Justin or more experienced members in the forum are a better resource than I am.
But IMO, the Greek mold looks INCREDIBLE and the art prints on it really well. But I find that I always lean towards the web mold for feel, overall look, and how they stack (less slippery imo) and shuffle.
Can’t go wrong with either, but all of my large 2,500+ chip sets are all web mold.
Best of luck!
But IMO, the Greek mold looks INCREDIBLE and the art prints on it really well. But I find that I always lean towards the web mold for feel, overall look, and how they stack (less slippery imo) and shuffle.
Can’t go wrong with either, but all of my large 2,500+ chip sets are all web mold.
Best of luck!
Graded98
New Member
I didn’t want to go full custom, I’ll probably make the decision on a web mold. Thanks guys.
I’ll probably go this route, I just was interested in the smooth finish but had my little doubts. Thank you
Yes, the 5c label will have the denom in pink and the 25c will have it in blue. I THINK it can be changed, but it would be a separate label fee from others getting that set.
OP
OP
Only one label fee
p0kerch1pf0rumrick
Waiting List
Apparently last month was the time a bunch of people ordered the Dunes of Arrakis set. I missed out, so I'll be paying at least part of the label fee, but I will definitely be ordering them this time. If anyone else missed out last month, I'd be thrilled to share the fee with you.
NickEvoX
Sitting Out
@justincarothers is it possible to do the Stardust labels on the tangiers chips and mold?
Last edited:
OP
OP
Yes
Clearly not as slick as the originals, but...DAMN! You clearly have to create a whole set of those denoms now, Cratty...
Yeah, I can pull the set together at some point and toss it out there for a future group buy if folks ever want it - wouldn't take too long to button up on my end, just need to find the time. That said, would love to see others make homage sets too for the mold!
Take your time - at the rate you're pumping out awesome new designs I'm going broke anyway lol
NickEvoX
Sitting Out
like this but keep stardust the mix up with stardust and tangiers is fine as it references tangiers at the actual stardust casino
Colquhoun
4 of a Kind
I have the Stardust set art already with denoms if you need
QuietMaple
Sitting Out
@Cratty, do you (or anyone else) have photoshop/illustrator versions of the various designs that I could use to play around with swapping some colors? In particular I'm interested in the various hybrid blank designs (AR series, BC series, v series, etc.) and the Big Top Poker set. (apologies if asking for that is considered a faux pas, I'm new to chipping 
)
Mostly I'm trying to generate some mockups / visuals akin to what you would get with the CPC Poker Chip Design Tool, but I want to be able to plug in any arbitrary color, not just the colors of clay that CPC carries.
)Mostly I'm trying to generate some mockups / visuals akin to what you would get with the CPC Poker Chip Design Tool, but I want to be able to plug in any arbitrary color, not just the colors of clay that CPC carries.
Colquhoun
4 of a Kind
If you have Adobe illustrator, you can use the chip template file in this post. It contains a bunch of edgespot designs. Just place your inlay art within a 24mm circle and you have a complete chip. Reach out to me via PM if you want a faux Greek or web mold Illustrator layer to add on top for mock-ups.@Cratty, do you (or anyone else) have photoshop/illustrator versions of the various designs that I could use to play around with swapping some colors? In particular I'm interested in the various hybrid blank designs (AR series, BC series, v series, etc.) and the Big Top Poker set. (apologies if asking for that is considered a faux pas, I'm new to chipping
Mostly I'm trying to generate some mockups / visuals akin to what you would get with the CPC Poker Chip Design Tool, but I want to be able to plug in any arbitrary color, not just the colors of clay that CPC carries.
QuietMaple
Sitting Out
Amazing! this is just the kind of thing I was looking for. Thanks so much.
@justincarothers my order I sent in with you is on this group buy, correct? Can I pay for air mail?
OP
OP
I have one order. So it would be down to $40 with your order
OP
OP
Current Label Splits:
Panda KGB- $0
BTP- $0
Billionaire Beach $80
Jokers Wild $40
Grand Casino- $80
Mirage V1- $80
Mr. Burns- $80
Panda KGB- $0
BTP- $0
Billionaire Beach $80
Jokers Wild $40
Grand Casino- $80
Mirage V1- $80
Mr. Burns- $80
Would I get to choose the 25¢ chip design or is the $0.25 design only card/no mold?
OP
OP
We could do either. Just make it clear on your order
NickEvoX
Sitting Out
Can I do the stardust white labels on the tangiers mold and chip colors. 39mm
$1 x 175
$5 x 300
$25 x 100
$100 x 25
600 chips total
$1 x 175
$5 x 300
$25 x 100
$100 x 25
600 chips total
drewbobby
Sitting Out
Is this an option?
Create an account or login to comment
You must be a member in order to leave a comment
Create account
Create an account and join our community. It's easy!
Log in
Already have an account? Log in here.
Similar threads
