• PCF is an eBay Partner. If you make a purchase through one of our links, we may earn a commission at no extra cost to you. Thank you for your support!

Barrington Poker table at Costco (3 Viewers)

Chipandchair said:
Topper coming Friday. Chips I have too many of. This is the garage table
Click to expand...
Right, but do you have a set to match this table, including the torn vinyl?
Think About It GIF by Identity
 
ef28 said:
Did you go too fast when drilling or did it rip when inserting the holder?
Click to expand...
Too fast, pushed down too hard right at the last second, went through the foam and just barely snagged the vinyl. I was able to preserve the foam in about 4 of the holes. It really helps because it holds the cup holder in very snugly. On the few where I removed all of the foam, the cup holders are looser so I am going to remedy that by filling in with foam
 
The old Costco cup holders fit perfectly into the new cup holders. Can I use them somehow? Ashtray??
IMG_7659.jpeg
 
Has anyone figured out a solution to (mostly) get rid of the gap in the middle of this table? I have leveled the table and put two toppers over it and I can still see it (barely, but I know it is there and I can definately feel it)! The closest I have gotten is running a shoestring down the gap. It is probably my OCD, but it drives me crazy...
 
fsupolo said:
Has anyone figured out a solution to (mostly) get rid of the gap in the middle of this table? I have leveled the table and put two toppers over it and I can still see it (barely, but I know it is there and I can definately feel it)! The closest I have gotten is running a shoestring down the gap. It is probably my OCD, but it drives me crazy...
Click to expand...
The princess and the pea
 
fsupolo said:
Has anyone figured out a solution to (mostly) get rid of the gap in the middle of this table? I have leveled the table and put two toppers over it and I can still see it (barely, but I know it is there and I can definately feel it)! The closest I have gotten is running a shoestring down the gap. It is probably my OCD, but it drives me crazy...
Click to expand...

I use a black piece of construction paper that the kids use for school. Two sheets so they cover the gap and then put the topper on top of that. No more line.
 
JackJack said:
Yes I got the dimmer in this thread.
Click to expand...

I tried to locate it. Which is the recommended dimmer?

And is it still the recommended one? Has anyone found a better one?

I'm a little disappointed a dimmer wasn't built into the table as the lights are quite bright. I honestly think the brightness needs to go down to 20 to 30% of the default level. I want to play a full game with them but my guests ask for them to be turned off within 10 minutes.

Anyone else feel the same way? Seems silly to have this feature we paid for and not be able to use it.
 
Last edited:
Styleman said:
I tried to locate it. Which is the recommended dimmer?

And is it still the recommended one? Has anyone found a better one?

I'm a little disappointed a dimmer wasn't built into the table as the lights are quite bright. I honestly think the brightness needs to go down to 20 to 30% of the default level. I want to play a full game with them but my guests ask for them to be turned off within 10 minutes.

Anyone else feel the same way? Seems silly to have this feature we paid for and not be able to use it.
Click to expand...
https://a.co/d/fi2mFUj
 
I have 3 of these tables and they are awesome! I am looking to try and make the cup holders a tad larger to accommodate larger drinks!
 
Teach42 said:
2) I believe that is correct. Regardless of whether they're metal or not, you're going to want deeper ones. The shallow ones are awful.
3) 8 is comfortable. 10 is tight but doable. I wouldn't recommend buying this for 10. But if your 8 player game had a few extras for a night, it would work.
Click to expand...
Can you point me to the deeper cup holders? Are people drilling the bottoms out of the table for the cup holders?
 
Kudos37 said:
Can you point me to the deeper cup holders? Are people drilling the bottoms out of the table for the cup holders?
Click to expand...
@Colquhoun got you hooked up with directions. Yes, you need to drill some holes, and you also likely need to cut some of the table leg supports down a bit so it still folds. Not the leg itself, but rather where it attaches to the table. Just need to take like an inch off of it if I remember correct.
 
Teach42 said:
@Colquhoun got you hooked up with directions. Yes, you need to drill some holes, and you also likely need to cut some of the table leg supports down a bit so it still folds. Not the leg itself, but rather where it attaches to the table. Just need to take like an inch off of it if I remember correct.
Click to expand...
The newer Barringtons dont require a support cut....maybe they were following the threads here and updated? ;)
 
Chipandchair said:
Here is a photo from a video. Cards glide across it like an air hockey table.
Fits almost perfectly.
View attachment 1628263
Click to expand...
Love it. I believe Ill be making my purchase soon. Costco table I think is the way to go. I wanted a Gutshot table or a bbo table but both shipped to hawaii is in the mid $1500’s. I dont play a lot but would like something nice for monthly home games. So I think costco table with a custom mat is the way to go. Thanks!
 
Avi8Caliber said:
Love it. I believe Ill be making my purchase soon. Costco table I think is the way to go. I wanted a Gutshot table or a bbo table but both shipped to hawaii is in the mid $1500’s. I dont play a lot but would like something nice for monthly home games. So I think costco table with a custom mat is the way to go. Thanks!
Click to expand...
Just a heads up, Costco is selling these currently for $399 shipped which is quite expensive, considering they had them on clearance for $99 and Walmart recently had the similar LED Barrington on sale for $169 delivered. You may want to wait for the next Walmart deal.
 
Colquhoun said:
Just a heads up, Costco is selling these currently for $399 shipped which is quite expensive, considering they had them on clearance for $99 and Walmart recently had the similar LED Barrington on sale for $169 delivered. You may want to wait for the next Walmart deal.
Click to expand...

Online price. They recently updated their app to check nearby Costco warehouse stock to see if the item is available in store or not. If it is, definitely cheaper.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account and join our community. It's easy!

Register

Log in

Already have an account? Log in here.

Similar threads

Remin1100
Barrington table - dolly ideas
Replies
7
Views
572
Forty4
Forty4
B
Barrington Custom Rail
Replies
0
Views
311
bean
B
meatshield
Pai gow poker mat from Costco
Replies
2
Views
322
FlunkGG
F
I
Barrington LED Table Fix
Replies
0
Views
320
Ipuntchips
I
V
Vaider Foldable Poker Table
Replies
6
Views
786
ShervinS
ShervinS
Back
Top Bottom