43 mm chips (1 Viewer)

[Zippity]

So this may be a stupid question, but I've never owned 43 mm chips until I recently picked up a half rack of 43 mm matsui zens. They don't really fit well in my acrylic racks and so I'm wondering how people store these. I'm trying to accumulate more of the higher denoms and so I'm projecting this to be an issue in the future.

Appreciate your input.

 

[Bloody Marvelous]

You can get 43mm chipracks from Spinetti's. They're 66.7mm wide racks though, specially suited for Paulsons, so you may only be able to fit 19 Matsui's per barrel iso 20.

 

[Zippity]

You can get 43mm chipracks from Spinetti's. They're 66.7mm wide racks though, specially suited for Paulsons, so you may only be able to fit 19 Matsui's per barrel iso 20.

Thanks so much! 19 is better than random stacks piled up in my room.

 

[Racer96]

Matsuis are 44mm.
ASM's are 44mm

Paulsons are 43mm.

It's only a mm, but it does make a difference. They'll fit in 43mm racks, but they won't quite touch the bottom of the rack. If you can get Matsui racks or B&G racks, they fit 44mm chips best.

Mike

 

[Zippity]

Matsuis are 44mm.
ASM's are 44mm

Paulsons are 43mm.

It's only a mm, but it does make a difference. They'll fit in 43mm racks, but they won't quite touch the bottom of the rack. If you can get Matsui racks or B&G racks, they fit 44mm chips best.

Mike

I've been trying to find Matsui racks but haven't had much luck online in stores. I'll put up a classified here in PCF and see if anyone wants to part with spares. I think if I don't get a response in a while, I might have to opt for paulsons just because of the supply.

 

[Tommy]

I picked up some 43mm (no name) racks off eBay a while back when I had some Crystal Park hundros. Slightly loose but the chips were not brand new either.

 

[Parrothedd]

I use Matsui racks for my Ritz. They fit a full barrel in a row, and fit in the standard birdcage. I put my 39mm and 43mm chips in the same racks. Here's a pic of some 43mm chips::

JT