For Sale 3D printed card/button holders, bridge/poker widths (defects, seconds and first runs) - 75+% off! (1 Viewer)

Status
Not open for further replies.

WedgeRock

Royal Flush
Joined
Feb 25, 2016
Messages
21,216
Reaction score
41,673
Location
America's High-Five
Rating - 100%
56   0   0
These are from @Sparkynutz's auction here; I grabbed what I wanted from the lot and I am selling off the rest. He described these items as "first runs, defects, 2nds, incomplete projects" and cautioned that there were "***No guarantees that any of these items are compatible with currently offered production products or items they were designed for***". If you want a guarantee on fit and finish, you can buy directly from @Sparkynutz here.

PXL_20241028_213437967~3.jpg


Shipping to CONUS by first class package of FRB, depending on size needed. Cost will be whatever is quoted on the USPS website at time of shipment.

I can hold your items if you want to buy more in later offerings and combine into one package. Pay for item now, pay for shipping when it goes out.

Payment by PPFF or Zelle.

SOLD Bridge size with double button holder (button shown is approximately 64mm), $8.25

SOLD Poker width double deck holder with button slots, $8, I believe this is intended to hold two 65mm x 12 mm dealer buttons. As you can see, the larger button (~12mm thick) fits very snugly; two 60mm dealer buttons (~6mm thick each) can also be squished in. If the fit is too tight for your taste, you might be able to open up with a light sanding.

SOLD Poker width double deck holder, with button slots (designed to be back lit with LEDs), $5. A little tight on the cards, causing them to sit at an angle rather than flat. You might be able to open up with a light sanding. Holds a Teddy KGB Oreo dealer button or three standard 60mm buttons.

Poker width double deck holder, with button slots (designed to be back lit with LEDs), $2. Very tight on the cards, causing them to sit at an angle rather than flat, same with the button slots (three buttons do not fit). You might be able to open up with a light sanding.

PXL_20241028_220937206.NIGHT~2.jpg
PXL_20241028_221110868~2.jpg
PXL_20241028_221120159.jpg


Add-ons:

These are partial 65mm x 5 single slot button holders. The arcs/ribs hold the button, separated by felt pieces. I checked with @Sparkynutz, and he cannot make replacement parts to make the usable as intended, so I am selling these off as misc items.

They are large enough to hold a deck of cards (poker or bridge), though not snugly. You could put a piece of cardboard on the bottom to cover the hole and use them to store misc items, card guards, dice for the horse racing game, etc. Or you could use them to store cut cards.

Shown with 8 poker width (note the wider cut cards at the bottom) and 21 bridge width with plenty of room for more cut cards.

PXL_20241031_140437149~2.jpg
PXL_20241031_140538666.jpg


The black box is no longer available, but the two orange boxes are available. $1 each to anyone who wants them. The curved ribs can be added for $1 for all four to anyone who buys a box (first come, first served -- only have 4; full box should have 5). Ribs fit both orange boxes.

PXL_20241029_023620962.jpg
PXL_20241029_024334439.jpg
PXL_20241029_024403329.jpg
PXL_20241029_024720812.jpg
 

Attachments

  • PXL_20241028_212848176~2.jpg
    PXL_20241028_212848176~2.jpg
    132.4 KB · Views: 108
  • PXL_20241028_212834591~2.jpg
    PXL_20241028_212834591~2.jpg
    211.6 KB · Views: 112
  • PXL_20241028_212816920~2.jpg
    PXL_20241028_212816920~2.jpg
    221.1 KB · Views: 88
  • PXL_20241028_214553848.jpg
    PXL_20241028_214553848.jpg
    201.1 KB · Views: 85
  • PXL_20241028_214640419~2.jpg
    PXL_20241028_214640419~2.jpg
    250.4 KB · Views: 91
  • PXL_20241028_220757794~2.jpg
    PXL_20241028_220757794~2.jpg
    97.3 KB · Views: 83
  • PXL_20241028_220725563.jpg
    PXL_20241028_220725563.jpg
    199 KB · Views: 86
  • PXL_20241028_220733783.jpg
    PXL_20241028_220733783.jpg
    143.4 KB · Views: 88
Last edited:
I'll take the blue Poker width double deck holder with button slots, $8, and the red Poker width double deck holder, with button slots (designed to be back lit with LEDs), $5, if still available.
 
Anyone who buys something from this sale gets a free 3D printed throw-in item.

PXL_20241028_225637098~2.jpg


The Skeletors' hands are messed up; only the small purple one had two middle fingers up.

The large duck has a lighter green head and the small ducks have lighter green tips of their heads. The medium duck seems to be all the same color.

Specify what you want with your order.
 
Bridge size with double button holder (button shown is approximately 64mm), $8.25 and the small, light (non-metallic purple-skeletor are SOLD.
 
OP updated with add-on:

These are partial 65mm x 5 single slot button holders. The arcs/ribs hold the button, separated by felt pieces. I checked with @Sparkynutz, and he cannot make replacement parts to make the usable as intended, so I am selling these off as misc items.

They are large enough to hold a deck of cards (poker or bridge), though not snugly. You could put a piece of cardboard on the bottom to cover the hole and use them to store misc items, card guards, dice for the horse racing game, etc. Or you could use them to store cut cards.

$1 each to anyone who wants them. The curved ribs can be added for $1 to anyone who buys a box (first come, first served -- only have 4; full box should have 5). Ribs fit all three boxes.

pxl_20241029_023620962-jpg.1411061

pxl_20241029_024334439-jpg.1411063

pxl_20241029_024403329-jpg.1411065

pxl_20241029_024646941-jpg.1411067

pxl_20241029_024720812-jpg.1411068
 
Bump, showing the 65mm x 5 single slot button holders, without ribs, used as a cut card box. Shown with 8 poker width (note the wider cut cards at the bottom) and 21 bridge width with plenty of room for more cut cards.

PXL_20241031_140437149~2.jpg
PXL_20241031_140538666.jpg


The black box is no longer available, but the two orange boxes are available. These are a steal at $1 each and if you need 4 ribs (5 ribs needed to hold 5 dealer buttons) and those on for $1 (first come first served).
 
Status
Not open for further replies.
Back
Top Bottom