The Official Mail Showcase Thread (poker related) (474 Viewers)

[maxim_666666]

View attachment 1664131

By the way, right now, anyone who receives a package can buy this awesome thing... It's been certified by all chip manufacturers.
What a Deal!!!!
https://www.pokerchipforum.com/threads/chiper-3000.142379/

 

[BNads86]

Inplay add-on!

 

[BKisback]

Thanks @Timmah - the kids approve

 

[GreatWhiteDope]

I'm not sure if I am proud or ashamed that one stupid comment of mine has turned into an actual habit and with related product offerings.

 

[AK Chip]

Impulse buy. No idea what I can use these for.

 

[bernielomax]

Impulse buy. No idea what I can use these for.
View attachment 1664294

@toothpic

 

[AK Chip]

@toothpic

Didn’t think about that, perfect!

 

[GoJo_Dingo]

Cali Fracs!

 

[GreatWhiteDope]

Impulse buy. No idea what I can use these for.
View attachment 1664294

Do I see some black HHR's in there? If so, I need a small handful of those if you are interested.

 

[smashed_potato]

Stella package @GoJo_Dingo

 

[AK Chip]

Do I see some black HHR's in there? If so, I need a small handful of those if you are interested.

They are yours. PM your address

 

[GoJo_Dingo]

Stella package @GoJo_Dingo

Thank you sir, I'm trying to figure out the best Cali colors, mixed set.

 

[elPadroni]

Thank you sir, I'm trying to figure out the best Cali colors, mixed set package

I'm trying to figure out the same now also! So far, I got Cache Creek $1's, Outpost San Ramon $5's and Capital Casino $20's. Still need to figure out a frac and $100s...

 

[GoJo_Dingo]

I'm trying to figure out the same now also! So far, I got Cache Creek $1's, Outpost San Ramon $5's and Capital Casino $20's. Still need to figure out a frac and $100s...

This post is useless without pics!
jk

 

[Jacks]

@maxim_666666 ???? lmao

 

[Jacks]

View attachment 1664330

@maxim_666666 ???? lmao

The coupon for $50 is a nice touch.

 

[Pippa]

Small found on FB marketplace ( seller are a PCF member at the end…)

Thanks to @TheJestyr for the extra chips and @JMC9389 for the Dal Negro cards
Stiff but playable

 

[GreatWhiteDope]

Small found on FB marketplace ( seller are a PCF member at the end…)
View attachment 1664433
Thanks to @TheJestyr for the extra chips and @JMC9389 for the Dal Negro cards
Stiff but playable

You don't see many brown theme sets done this well. Kudos!

 

[Max D]

Got some cards!!! Can’t wait to try them.

 

[GoJo_Dingo]

For Cali Colors Mixed set.

 

[GoJo_Dingo]

View attachment 1664658

So, best way to remove the gold inked cancellation stamp?

Is there a way to remove the embossed cancellation stamp?

 

[maxim_666666]

Small found on FB marketplace ( seller are a PCF member at the end…)
View attachment 1664433
Thanks to @TheJestyr for the extra chips and @JMC9389 for the Dal Negro cards
Stiff but playable

What a find!!

 

[sleepy595]

poker chips

didnt get any edge printing on the plaques which kinda sucks. also dont think the game will ever play big enough to use very many of them

 

[maxim_666666]

So, best way to remove the gold inked cancellation stamp?

Is there a way to remove the embossed cancellation stamp?

Acetone... (but there's concern it might affect the chip itself) Or caustic soda + ultrasonic machine! In my case, this worked fine, though on different chips. These chips are completely covered in plastic, so there's no need to worry about damaging the front part.

I also did this right now using the same caustic soda, a melamine sponge, and my fingers. Soak for 1 minute. It's a bit tedious to do by hand, so I used an ultrasonic cleaner. If any stamps remained, I cleaned them off manually.
Naturally you need to try it on 1 chip.
I did this for you right now...

This is a pair of chips that I cleaned in an ultrasonic bath using a caustic soda solution. Essentially, it’s the same alkaline solution (many people use metasilicate), but caustic soda is several times cheaper and easier to obtain—while still giving us the same alkalinity.

The stamp has worn down part of the cross-hatching—essentially flattening it—but otherwise it’s barely noticeable and doesn’t affect the chips’ functionality at all. Honestly, I’m very pleased that it worked out.

 

[maxim_666666]

View attachment 1664330

@maxim_666666 ???? lmao

Okay, you've got me figured out. I was just trying to cash in on the knife craze.

 

[MatrixExplosion]

Acetone... (but there's concern it might affect the chip itself) Or caustic soda + ultrasonic machine! In my case, this worked fine, though on different chips. These chips are completely covered in plastic, so there's no need to worry about damaging the front part.

I also did this right now using the same caustic soda, a melamine sponge, and my fingers. Soak for 1 minute.
I also did this right now using the same caustic soda, a melamine sponge, and my fingers. Soak for 1 minute. It's a bit tedious to do by hand, so I used an ultrasonic cleaner. If any stamps remained, I cleaned them off manually.
Naturally you need to try it on 1 chip.
I did this for you right now...
View attachment 1664771View attachment 1664772View attachment 1664773View attachment 1664774View attachment 1664775View attachment 1664776View attachment 1664777

This is a pair of chips that I cleaned in an ultrasonic bath using a caustic soda solution. Essentially, it’s the same alkaline solution (many people use metasilicate), but caustic soda is several times cheaper and easier to obtain—while still giving us the same alkalinity.
View attachment 1664779View attachment 1664780View attachment 1664781View attachment 1664782View attachment 1664783View attachment 1664784

The stamp has worn down part of the cross-hatching—essentially flattening it—but otherwise it’s barely noticeable and doesn’t affect the chips’ functionality at all. Honestly, I’m very pleased that it worked out.

Thank you for this, I was worried about damaging the chip inlay so didn’t try

 

[grandmeme]

I have no cancellation stamp chips, but I wonder if using an alcohol instead of a ketone could do the job. Maybe isopropanol or methanol? They would be a lot gentler.

 

[maxim_666666]

Thank you for this, I was worried about damaging the chip inlay so didn’t try

Well, someone had to try it. I was also worried about the labels (I even saw the liquid seeping into them), since caustic soda is quite aggressive and needs to be applied to a surface you don't mind ruining, like an old table. However, I didn't notice any changes to the label. And it really did work in my case.

 

[maxim_666666]

I have no cancellation stamp chips, but I wonder if using an alcohol instead of a ketone could do the job. Maybe isopropanol or methanol? They would be a lot gentler.

I don't know about ketone. But it's gentler than the acetone you get at the supermarket. Alcohol didn't work much for me, though. Scrubbing with a sponge was more effective.
Regular acetone has a VERY HIGH (I'D EVEN SAY 100%) CHANCE OF DAMAGING THE CHIP'S BODY. It's effective, but you have to be very careful when using it. I have samples from Apache where this happened. I'll send you a photo this evening.

 

[Mushmanchuman]

These “HOT” TRK chips are cool and have a rad backstory. Nothing like getting your wig twisted back in your own club!

Credit: Chipguide