OP
OP
As soon as your pms open up let me know your shipping details and I will get you a quote
-
PCF is an eBay Partner. If you make a purchase through one of our links, we may earn a commission at no extra cost to you. Thank you for your support!
Preorder CHIPS* WEB, JESTER, GREEK, SUN, TANGIERS* MARCH 2026 (4 Viewers)
- Thread starter justincarothers
- Start date
SpikedHog
Sitting Out
Those monopoly ones are great, I might have to get some!
SpikedHog
Sitting Out
Looking at getting some cowboy themed ones, something like this, is there a way to customize what the denominations would be? Want to do either 5¢/1bit, 25¢, $1, $5 denoms.
Last edited:
OP
OP
Yes, you want the Binions labels?
SpikedHog
Sitting Out
I'll be tweaking these a bit (updated the picture), and might find another inlay (are there people that create inlays here?).
Also, what is a binion?
Also, what is a binion?
Labrat
Straight
Colquhoun
Straight Flush
Benny Binion, the man in the photo on those chips. Founded Binion's Horseshoe casino in Las Vegas, and the World Series of Poker, among many other things.
SpikedHog
Sitting Out
oh dang lol ok thanks
MrRandleMcMurphy
Waiting List
Hi Justin,
I'm split...more like torn between the Grand Casino (Greek Mold) and Treasure Islands (Web Mold) in 39mm.
I was leaning towards the Treasure Islands until I saw the image above, so do you have any photos of the Treasure Islands?
I'm looking to purchase a 300 chip set shipped to Denmark, but may buy 400 as I'd love to have a sample of all denoms.
Thanks,
Randle
OP
OP
We have never had the Treasure Islands made on a hybrid chip
MrRandleMcMurphy
Waiting List
Thanks Justin, that makes this even more interesting...do I take the chance and be the first
SpikedHog
Sitting Out
I notice the card molds are slightly cheaper than normal hybrids but more expensive than textured. Whats special about the card molds? Are they still hybrids? Do they still have an inlay sticker spot?
SpikedHog
Sitting Out
Ok thank you. So the "inlay" is not a sticker, but its printed on like the edge spots would be printed on? Bc I noticed the cowboy ones I wanted are not actually a hybrid, its listed with the cards/no molds. Would I still provide a sticker graphic that I wanted? Is there a tradeoff between sticker and printed? Also it has a cowboy themed horseshoe mold. Is that something that was custom, or can I order it like that? Are the horseshoes stamped in, or are those just printed and I'm tripping?
Labrat
Straight
Yes. Those you've posted above are textured no mold and the horseshoe around the chip is printed to look like a house mold.
SpikedHog
Sitting Out
Oh clever, TYSM. I think I prefer the actual molded hybrids, so i may just do a web or something generic for the rim
TheYeti
3 of a Kind
SpikedHog
Sitting Out
I know there is chipomatic, but it does not do some things I want to play around with, what do people use for modeling different chip options? Or do we have to just wait for chipomatic to ad more options. I don't want to wait more than a month or so to get an order in, but I do have some time. I saw @timinater but looks like he does not do mockups anymore.
GamingWithChips
Two Pair
There are a few different PCF's that are designers that can help with creating custom chips and inlays with Adobe Illustrator. I'm assuming your are looking for some custom edge spot options that aren't exactly what you need/want that Chipmatic currently offers? From what I've found from Chipmatic I can basically do anything I've seen from "real" poker chips and much more beyond that.
SpikedHog
Sitting Out
I wanted to see the different rim patterns (if that is the right name for them). I might want to go with something like the horseshoes that were printed on the textured ones. But wanted to try to visualize them in 3d first. I am working with a guy from here doing the labels, not sure if he could do that too. Also, I hate that if I play around with changes, its kinda difficult rn to get my originals back. I have a ton of gallery exports right now to compare, but I can't recall the colors even if I want to go back to them in chipmatic
Also curious, how involved/expensive is it to do a custom mold, or is that not even an option? Like if I wanted a hybrid with horseshoes in the molded rim pattern?
Also, TY everyone for all the input, I am starting to think I should create my own thread for this, don't want to fill up the order thread.
Also curious, how involved/expensive is it to do a custom mold, or is that not even an option? Like if I wanted a hybrid with horseshoes in the molded rim pattern?
Also, TY everyone for all the input, I am starting to think I should create my own thread for this, don't want to fill up the order thread.
The chip on the left is card mold, on the right is web mold hybrid. You can see how much more detailed the printing on the sticker is.
SpikedHog
Sitting Out
This is so very helpful thank you! the idea of the printed-on ones seems cool, but the sticker one is definitely sharper. Which one lasts longer in practice? Which do you prefer?
I ordered a hybrid mixed bag I think. I don't know if it comes with any textured or card mold versions though. That would be cool to be able to compare in person.
I prefer the hybrids. I'm still new enough to ceramics that I can't really comment on which last longer.
SpikedHog
Sitting Out
I see that they have different textures too. I think I need to order a sample of the non-hybrids too for myself. TY for this
26bigs
Sitting Out
KGB Panda - 39mm Web mold
$.50 (in $1000 color) - 50
$1 (in $.25 color) - 200
$5 - 225
$25 (in $100 color)- 25
$.50 (in $1000 color) - 50
$1 (in $.25 color) - 200
$5 - 225
$25 (in $100 color)- 25
jEarnhardt
Waiting List
Hi all - I'm a long time lurker, but finally signed up because these Tina chips are so interesting. I tried out the chipmatic tool with some existing artwork from an old progen 80 custom cash set I want to extend.
Looking at the 43mm web mold Tina hybrids and reading around the PCF, I think I'm understanding that the image in the center is truly a sticker, not a bonded inlay or part of the overall chip printing?
If it is a sticker, I'm also guessing that it will be centered when applied, but not rotationally aligned, so I shouldn't depend on the edge spots being aligned to any certian point on the sticker? For example, in the attached image, my pirate skull could have edge spots directly above his head, or blue space, or the asymetrical alignment shown - different for each chip, right?
sorry for the long first post - can't PM yet and I'm pumped about this group buy thing!
Looking at the 43mm web mold Tina hybrids and reading around the PCF, I think I'm understanding that the image in the center is truly a sticker, not a bonded inlay or part of the overall chip printing?
If it is a sticker, I'm also guessing that it will be centered when applied, but not rotationally aligned, so I shouldn't depend on the edge spots being aligned to any certian point on the sticker? For example, in the attached image, my pirate skull could have edge spots directly above his head, or blue space, or the asymetrical alignment shown - different for each chip, right?
sorry for the long first post - can't PM yet and I'm pumped about this group buy thing!
SpikedHog
Sitting Out
Oh good question about the sticker alignment. I can answer the part about it being a sticker. It is a sticker for hybrids, it is not a sticker for textured/card-molds.
jEarnhardt
Waiting List
Thanks!
Create an account or login to comment
You must be a member in order to leave a comment
Create account
Create an account and join our community. It's easy!
Log in
Already have an account? Log in here.
Similar threads
- Sticky
