Vendor Sale RACKS* Justin Chip RACKS (3 sizes) *IN STOCK* (4 Viewers)

So simple question....is one rack considered one piece or two? For example in a standard 1000 chip birdcage in a stacked design with top and bottom of each rack stacked on top of each other is that ten(10) racks or twenty(20) racks? Just for clarity?
Considering how to organize my mess-o-chips.

Is this 10 or 20 racks?
PXL_20230504_020911149.jpg

(Picture stolen courtesy of me from @BearMetal 's previous post)
 
So simple question....is one rack considered one piece or two? For example in a standard 1000 chip birdcage in a stacked design with top and bottom of each rack stacked on top of each other is that ten(10) racks or twenty(20) racks? Just for clarity?
Considering how to organize my mess-o-chips.

Is this 10 or 20 racks?
View attachment 1131313
(Picture stolen courtesy of me from @BearMetal 's previous post)
That is 10 racks
 
I’ll pm you for 5 more racks. These things fit so right. Try them once and you’ll never buy the old ones again. I’ll be doing a complete overhaul of my racks in the next month to these racks. They fit easily together and the material is not so stiff and brittle that I need to worry about cracking or chipping of the rack. 11 thumbs up on this find!
 
I'll take 20 x 40mm

I’ll pm you for 5 more racks. These things fit so right. Try them once and you’ll never buy the old ones again. I’ll be doing a complete overhaul of my racks in the next month to these racks. They fit easily together and the material is not so stiff and brittle that I need to worry about cracking or chipping of the rack. 11 thumbs up on this find!

I need 40 more 40 racks, got them? How many fit in the original box? 50? Might need 50 then.
I will fill these orders tomorrow. Will also count inventory after that. Still have a few left and have 2000 more that are on the way here
 
In Stock!! Acrylic Chip Racks

40 mm- $2.90 each
(current inventory: 850)
43 mm- $2.95 each (current inventory: 250)
50 mm- $4.75 each (current inventory: 35)

Shipping rates:


1-10 racks- $9.75
11-20 racks- $14.75
21-30 racks- $18.00
31-40 racks- $25.50
41-? racks- TBD

Prices good for continental US. Other locations shipping TBD

Chips in pictures for reference only and are not included


These work great with Cards Mold and Paulson chips.

They do have notches so they interlock when stacked on top of each other.

40 mm racks will fit 10 to a standard birdcage

43 mm racks will fit 8 to a standard birdcage




Please post your quantity here and I will PM you an invoice. Orders filled in order of payment

40MM

View attachment 1128546
View attachment 1128547View attachment 1128548View attachment 1128549View attachment 1128550View attachment 1128551View attachment 1128552View attachment 1128562View attachment 1128563

43 MM

View attachment 1128553

View attachment 1128554View attachment 1128555View attachment 1128556View attachment 1128557View attachment 1128558View attachment 1128559

50 MM

View attachment 1128560View attachment 1128561
I need 30 40mm
 
Inventory counts as of 05-08

40 mm- 145
43 mm- 100
50 mm- 23

More to arrive in the next couple of weeks
 
Any thoughts on how to get that tiny bit of wiggle room needed for a barrel that’s too snug? I have a LGK set that is so close to fitting.

I’ve been trying to think of a good way to remove the tiny vertical bars on the sides?
 
Any thoughts on how to get that tiny bit of wiggle room needed for a barrel that’s too snug? I have a LGK set that is so close to fitting.

I’ve been trying to think of a good way to remove the tiny vertical bars on the sides?
Looks like those vertical bars are flush with the inside walls of the rack. So even if you remove them, you wont gain any more space.
 
Looks like those vertical bars are flush with the inside walls of the rack. So even if you remove them, you wont gain any more space.
Dang. Haven’t really studied them close yet. Any ideas? I was really hoping to switch all my racks over to these
 
The only way I have ever seen is a VERY light sanding. Sounds crazy, and I personally wouldnt do it, but it has been done by a few folks.
https://www.pokerchipforum.com/thre...-chips-to-fit-in-over-sized-chip-racks.69192/
So I took a chisel to the little vertical bars on one slot in one rack, scraping away 8 little bars. Worked quite well but looks quite ugly.

I’m gonna to look around and see if I can find a neater way. Might try a relatively high grit sand paper and some elbow grease.

1B816F66-C844-43F6-BF34-E4095F50A02A.jpeg


A64EF355-392E-4576-9146-75D6D9AC42A7.jpeg
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account and join our community. It's easy!

Log in

Already have an account? Log in here.

Back
Top Bottom