World Poker Tour Folding Table? (1 Viewer)

jahmot

Two Pair
Joined
Sep 28, 2019
Messages
322
Reaction score
665
Location
LA
Does anyone have experience with this table? Looking to get a cheap table for my home game of normally ~6 people. I've seen recommendations on here for the Barrington one from Walmart, but that might be a bit big for my apartment.
Found the table below for $60 on facebook marketplace which seems like an okay deal.

table.jpg
 
Ideally there should be 24in of circumference per player, but even less can be fine on a round table, mysteriously:)
 
I’ve had one of these- don’t spill anything on it. And if you think about recovering it it’s all riveted together, you’d have to drill out the rivets and replace with bolts.
For an occasional use table it’s good, I wouldn’t try to seat more than 5-6 at it though. It’s a good board game table size.
 
Don't know if you already decided on the table or not. I had this as my first poker table. It felt very small. And it was ruined by a single beer spilled on it, the felt bubbled up permanently. If you want a really comfy 4 person table, or a cramped 6 person table, it will work. I got mine new for $85 for the record.
 
Don't know if you already decided on the table or not. I had this as my first poker table. It felt very small. And it was ruined by a single beer spilled on it, the felt bubbled up permanently. If you want a really comfy 4 person table, or a cramped 6 person table, it will work. I got mine new for $85 for the record.
Ended up getting it for $50. So far I'm happy with it although the felt does feel cheap. Any idea if it would be possible to refelt it?
 
I never tried, I sold it at a garage sale to someone who planned to refelt it though. I can't recall from memory of the rail comes off easily.

I liked it well enough, it was used until the spill and sale. If I recall it doesn't really have any padding under the felt, so it was less comfortable to play on than something with a touch of cushion. If you refelt it, might as well add some! :)
 
No build photos??

Boo! :tdown:

Oops, sadly I didn't think to take any photos until the end.
Basically just unscrewed the vinyl edge and stapled the foam and new cloth over the old felt then reattached the vinyl. Next time though :)
 
Longshot, but do you know what type of foam you got and if you reused all the old hardware or if you had to get new screws?
This is the foam I used:
https://www.casinosupply.com/products/volara-poker-table-foam-padding-59-inches-wide-sold-per-foot-1

I reused the screws, but be careful because it is easy to strip the cheapy plastic that you are screwing them into. I also didnt screw in too many of the screws on the inner edge of the rail since it is easy to distort the foam/felt with the screws.
Also lots of staples.
 
This is the foam I used:
https://www.casinosupply.com/products/volara-poker-table-foam-padding-59-inches-wide-sold-per-foot-1

I reused the screws, but be careful because it is easy to strip the cheapy plastic that you are screwing them into. I also didnt screw in too many of the screws on the inner edge of the rail since it is easy to distort the foam/felt with the screws.
Also lots of staples.
Really appreciate the info! Will get some on order so I can get my table updated!
 
Just picked up the same table and Google'd, glad I did. Nice job! Gives me hope that the rails come off easier than expected. Outside material of the rail is a little ripped and the original felt is gross, looking forward to renewing it.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account and join our community. It's easy!

Log in

Already have an account? Log in here.

Back
Top Bottom