Wooden chip trays II

T_Chan

Full House
Site Vendor
Joined
Apr 25, 2013
Messages
3,588
Reaction score
8,453
Location
Vancouver
I'm building a second set of wood chip trays. My first set was built using the wood whisperer method of clamping 2 blanks together and drilling out the holes to create 2 trays. They turned out alright, but there were minor inconsistencies since I couldn't get my spacing perfect. I also wasn't able to mill some grooves on the underside to make them stackable. I'm now taking another stab at them, but this time I'm using a 40mm cove bit and a CNC router to make them. Today I tried it with 5 racks and the results look promising.

1st batch from last year




New batch using CNC. They still need to be sanded and trimmed to size as well as get the side pieces added on.


These ones have grooves on the underside
 

BUBBLE

3 of a Kind
Joined
Apr 5, 2013
Messages
647
Reaction score
137
Location
ontario
Will you be selling these and taking custom orders say I wanted twenty four hundred chip trays made that we're like a serving tray ( handle at each end )
 

T_Chan

Full House
Site Vendor
Joined
Apr 25, 2013
Messages
3,588
Reaction score
8,453
Location
Vancouver
Yes I will. I'm just working on my first set to make sure I can make them really nice before I start taking any orders. I figure with my CNC I can make racks and trays no problem.
 
Top Bottom