Unnamed futuristic design for 43mm hybrid (1 Viewer)

4e5ad6eb0d2650fa31bc2c1b44e56261.jpg
 
Good advice thanks. Added some glow back but not as bright and some Tron accents to the accent line.
pcf1.png
 
I suspect this will be controversial but how about all black chips with just the lines in colour?

View attachment 197837

Only thing I would caution is to choose highlight colours that are easily distinguishable. In the mockup, the $1 and $25 are nearly identical to me. It took me about 10 sec or so to realize they were different.
 
It may be time to talk to a vendor and see if they can print in neon or very bright colours. It's not impossible...

10PCSLotNewArrivalUniqueCeramicMaterialFancyHandfeelPokerChipsUpscaleCasinoChipSetPokerstarsProfessionalGame-32457031426-240-500x500.jpg
 
After printing one of these on paper its clear they do need thicker lines etc. I'm going with progression on chips and will work on the edge spots next and then inlays. I might try adding a circular saw pattern to the inner edge or something else.
montoge2.png
 
Purple is light disc themed and .25 cents. The blue is the $1 and resembles the suits worn inside Tron. The red is the $5 and has shapes of recognizer. The green is the $25 and will be the of the light jet. The the orange is the 100 and will be the tank.
 
Here is the edge spots and the first inlay. The naming is still in question.
EDGEMONTOGE.png
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account and join our community. It's easy!

Log in

Already have an account? Log in here.

Back
Top Bottom