10/1 Update
Orders are continuing to come in, so thanks for joining in on the fun!
I’m waiting on some details from the vendor, so I’ll keep the order live for a little longer to give you a little more time to pull the trigger. I’ll leave it open a liiiiiiiiiitle longer until I get off work tomorrow around 1600 Central Time.
And we continue to creeeeeeep towards the 500 chip price break for 47mm chips. If we get another 12 chips ordered that add to that total, I’ll push us over the limit myself with the last 10.
9/30 Update
We are now officially in the 1000-2999 price tier for 43mm and less than 40 from the 500-999 tier for 47mm!!
9/29 Update
There are enough pledged orders to get us the cheapest rate on 39mm chips, and we are over half way to the 500 chip price break on both the 43mm and 47mm chip size. Will all this in mind, I am going to close orders on 9/30 at 23:59 Central Time as planned. So get your orders in now if you want to get in on this buy!
9/25 Update
After some significant initial interest, I’m going to officially switch this thread over to “taking orders”. With the order I have, and what interest has been expressed, we’re 80% of the way to the cheapest 39mm tier, and the 43mm and 47mm options are already at the second pricing tier. I will be placing an order for myself regardless of total interest, so if you were concerned about the buy not happening, you can chuck those worries out the window.
Please use the link below to look at the available chip options from @rjdev7.
PLEASE USE THIS SPREADSHEET FOR ORDER REFERENCE.
Once you figure out what you want, post in THIS THREAD using only the new identifier in format at the bottom of this post. For those of you that posted interest already, please post again with your official order breakdown in a new post, just to keep things neat and tidy. If anyone needs to make changes to their order, please create a new post and quote your initial order for reference
*Addition to the initial post: There have been questions in previous GB about plaques. All of the artwork for these chips is circular, and won’t transfer to a rectangular plaque. I am going to place a small order of 60mm chips as well to serve as de facto plaques, specifically the C22 option (Bowser $100). I will be ordering enough (10) to hit the minimum for the rolling edge printing. So if that sounds interesting to you, please feel free to hop on that train as well!
Below is the running total for each chip size so you know what price tier each is currently in:
39mm = 4821
43mm = 1208
47mm = 478
60mm = 35
*When figuring pricing, please use the charts below in this post under the heading 9/23 , NOT the charts on the BRpro website. I have rolled in the $0.06/chip royalty to be paid to the vendor for the design and use of the artwork files*
As stated in the interest post, I’ll handle all the reshipping for the orders. I won’t know what those costs will be yet, but I’ll be using flat rate boxes from the post office, so you should have a ballpark idea of what those costs will be when you place your order. If you have any questions about shipping cost, don't hesitate to ask. Once the order arrives, I will send out PMs to everyone requesting payment for reshipping costs. I’ll get shipping addresses at that time.
I’m going to take the leap and offer shipping options to those outside the CONUS. I haven’t done much of that yet, so please expect some questions along the way if you fall into this category. I promise to make it worth your time though!
There will be a minimum quantity of 25 for all chips for each design at each size. The minimum can be spread amongst all orders, so please don’t feel like you need to hit the minimum by yourself. When ordering is closed, I’ll touch base with anyone who has chips ordered that don’t meet the min quantity to give you the opportunity to raise your total or change to a different option.
For now, I’m going to leave to order open until 9/30 at 23:59 Central Time to ensure the best chance of everyone gets their chips in plenty of time for the holiday games that many people want to run. Once the order is closed, I’ll send out a PM with your total for the chips, taxes, and shipping from BRpro which will be prorated based on your % of the total order. Once all payments are made I’ll confirm the order with the vendor and we’ll be off to the races.
If anyone has any questions, or if any of this is unclear, please feel free to let me know and I’ll clarify.
Thanks in advance everyone! Let’s get this show on the Rainbow Road!
39mm
C1 x ___#___
C2 x ___#___
C3 x ___#___
Etc.
43mm
C1 x ___#___
C2 x ___#___
C3 x ___#___
Etc.
47mm
B1 x ___#___
B2 x ___#___
B3 x ___#___
B4 x ___#___
B5 x ___#___
B6 x ___#___
Etc.
60mm
C22 x ___#___
C23 x ___#___
Etc.
-----------------------------------------------
9/23
Hello PCFers!
I'm looking to add onto my current SPW sets since I under bought on the first group buy (They really were rookie numbers). I'm looking to add 500 - 700 chips, but I sure wouldn't mind trimming the cost per chip down a little bit by pooling a few orders together. I'm looking to get this order in quickly (hopefully before someone wakes up Billie Joe Armstrong), but I'm willing to be flexible depending on how much interest is out there.
One thing I would like to venture towards is a 43mm option. I've confirmed with @rjdev7 that the artwork for this set is all vector based, so it should scale without issue. I would also consider placing an order of 47mm chips if there's enough interest (I'm thinking specifically the All in/Rebuy/Show 'em/Bounty etc. options). So if you recognize yourself below, this may be the buy for you.
The pricing below was pulled from the BRpro website on 9/22. I've included the royalty fees in the listed prices to give you a better idea of your prospective total. This does not include any taxes or shipping, however.
*Of note, there are No more Chipco blanks left, so these will be printed on the standard blanks only*
If any of this piques your interest, post below with your order!
I'm not going to commit to shipping internationally just yet since I don't know how many interested parties there will be, but I don't want to slam that door just yet either.
Thanks everyone!
Orders are continuing to come in, so thanks for joining in on the fun!
I’m waiting on some details from the vendor, so I’ll keep the order live for a little longer to give you a little more time to pull the trigger. I’ll leave it open a liiiiiiiiiitle longer until I get off work tomorrow around 1600 Central Time.
And we continue to creeeeeeep towards the 500 chip price break for 47mm chips. If we get another 12 chips ordered that add to that total, I’ll push us over the limit myself with the last 10.
9/30 Update
We are now officially in the 1000-2999 price tier for 43mm and less than 40 from the 500-999 tier for 47mm!!
9/29 Update
There are enough pledged orders to get us the cheapest rate on 39mm chips, and we are over half way to the 500 chip price break on both the 43mm and 47mm chip size. Will all this in mind, I am going to close orders on 9/30 at 23:59 Central Time as planned. So get your orders in now if you want to get in on this buy!
9/25 Update
After some significant initial interest, I’m going to officially switch this thread over to “taking orders”. With the order I have, and what interest has been expressed, we’re 80% of the way to the cheapest 39mm tier, and the 43mm and 47mm options are already at the second pricing tier. I will be placing an order for myself regardless of total interest, so if you were concerned about the buy not happening, you can chuck those worries out the window.
Please use the link below to look at the available chip options from @rjdev7.
PLEASE USE THIS SPREADSHEET FOR ORDER REFERENCE.
Once you figure out what you want, post in THIS THREAD using only the new identifier in format at the bottom of this post. For those of you that posted interest already, please post again with your official order breakdown in a new post, just to keep things neat and tidy. If anyone needs to make changes to their order, please create a new post and quote your initial order for reference
*Addition to the initial post: There have been questions in previous GB about plaques. All of the artwork for these chips is circular, and won’t transfer to a rectangular plaque. I am going to place a small order of 60mm chips as well to serve as de facto plaques, specifically the C22 option (Bowser $100). I will be ordering enough (10) to hit the minimum for the rolling edge printing. So if that sounds interesting to you, please feel free to hop on that train as well!
Below is the running total for each chip size so you know what price tier each is currently in:
39mm = 4821
43mm = 1208
47mm = 478
60mm = 35
*When figuring pricing, please use the charts below in this post under the heading 9/23 , NOT the charts on the BRpro website. I have rolled in the $0.06/chip royalty to be paid to the vendor for the design and use of the artwork files*
As stated in the interest post, I’ll handle all the reshipping for the orders. I won’t know what those costs will be yet, but I’ll be using flat rate boxes from the post office, so you should have a ballpark idea of what those costs will be when you place your order. If you have any questions about shipping cost, don't hesitate to ask. Once the order arrives, I will send out PMs to everyone requesting payment for reshipping costs. I’ll get shipping addresses at that time.
I’m going to take the leap and offer shipping options to those outside the CONUS. I haven’t done much of that yet, so please expect some questions along the way if you fall into this category. I promise to make it worth your time though!
There will be a minimum quantity of 25 for all chips for each design at each size. The minimum can be spread amongst all orders, so please don’t feel like you need to hit the minimum by yourself. When ordering is closed, I’ll touch base with anyone who has chips ordered that don’t meet the min quantity to give you the opportunity to raise your total or change to a different option.
For now, I’m going to leave to order open until 9/30 at 23:59 Central Time to ensure the best chance of everyone gets their chips in plenty of time for the holiday games that many people want to run. Once the order is closed, I’ll send out a PM with your total for the chips, taxes, and shipping from BRpro which will be prorated based on your % of the total order. Once all payments are made I’ll confirm the order with the vendor and we’ll be off to the races.
If anyone has any questions, or if any of this is unclear, please feel free to let me know and I’ll clarify.
Thanks in advance everyone! Let’s get this show on the Rainbow Road!
39mm
C1 x ___#___
C2 x ___#___
C3 x ___#___
Etc.
43mm
C1 x ___#___
C2 x ___#___
C3 x ___#___
Etc.
47mm
B1 x ___#___
B2 x ___#___
B3 x ___#___
B4 x ___#___
B5 x ___#___
B6 x ___#___
Etc.
60mm
C22 x ___#___
C23 x ___#___
Etc.
-----------------------------------------------
9/23
Hello PCFers!
I'm looking to add onto my current SPW sets since I under bought on the first group buy (They really were rookie numbers). I'm looking to add 500 - 700 chips, but I sure wouldn't mind trimming the cost per chip down a little bit by pooling a few orders together. I'm looking to get this order in quickly (hopefully before someone wakes up Billie Joe Armstrong), but I'm willing to be flexible depending on how much interest is out there.
One thing I would like to venture towards is a 43mm option. I've confirmed with @rjdev7 that the artwork for this set is all vector based, so it should scale without issue. I would also consider placing an order of 47mm chips if there's enough interest (I'm thinking specifically the All in/Rebuy/Show 'em/Bounty etc. options). So if you recognize yourself below, this may be the buy for you.
The pricing below was pulled from the BRpro website on 9/22. I've included the royalty fees in the listed prices to give you a better idea of your prospective total. This does not include any taxes or shipping, however.
*Of note, there are No more Chipco blanks left, so these will be printed on the standard blanks only*
39 mm | ||
---|---|---|
500-999 | 0.96 | |
1000-2999 | 0.86 | |
3000+ | 0.81 |
43 mm | ||
---|---|---|
25-99 | $1.91 | |
100-499 | $1.21 | |
500-999 | $1.06 | |
1000-2999 | $.96 | |
3000+ | $.91 |
47 mm | ||
---|---|---|
25-99 | $2.21 | |
100-499 | $1.51 | |
500-999 | $1.36 |
60 mm | |
---|---|
1-24 | $7.06 |
25-99 | $6.31 |
100+ | $5.31 |
If any of this piques your interest, post below with your order!
I'm not going to commit to shipping internationally just yet since I don't know how many interested parties there will be, but I don't want to slam that door just yet either.
Thanks everyone!
Last edited: