Wanted Milling Project (1 Viewer)

[Timo Wottka]

Hi there, i am looking for someone, who have 200 Paulson Chips with sharp edges, for milling and re - hotstamped them... There should be stamped 10 Ct on both sides like in my picture here...

Can anybody help me...???

 

[duffman]

Hi there, i am looking for someone, who have 200 Paulson Chips with sharp edges, for milling and re - hotstamped them... There should be stamped 10 Ct on both sides like in my picture here...

Can anybody help me...???

Is that @chkmte photo? May want to reach out to him to see if he still has those chips or something simular. Good luck.

 

[Timo Wottka]

Yeah it is this picture... The Chips are not available anymore...
Thank you...

 

[chkmte]

Yeah it is this picture... The Chips are not available anymore...
Thank you...

Timo, I've looked but I don't have 200 of any solid remaining. Sorry, good luck.

 

[Timo Wottka]

Thanks...

 

[Timo Wottka]

Up up...(y) :thumbsup:

 

[Timo Wottka]

Bump up...:

 

[duffman]

Do you need those exact same chips that Tim was selling? Does the hotstamp matter? Here are 100 white starbursts on eBay that could get you started...

http://www.ebay.com/itm/100-Paulson...f4abd4c&pid=100033&rk=3&rkt=3&sd=292080201181

 

[Jambine]

Do you need those exact same chips that Tim was selling? Does the hotstamp matter? Here are 100 white starbursts on eBay that could get you started...

http://www.ebay.com/itm/100-Paulson-Poker-Chips-Starburst/142334818386?_trksid=p2045573.c100033.m2042&_trkparms=aid=111001&algo=REC.SEED&ao=1&asc=20131017132637&meid=faba7e40d0a14b629eabd5312f4abd4c&pid=100033&rk=3&rkt=3&sd=292080201181

I wondered about that. Needs chips for a milling project but they must be hot-stamped 10 ct........?

 

[Timo Wottka]

@Jambine :

I want or need someone, who have 200 Chips from Paulson which he can milled for me and stamped a 10 Ct on both sides of the milled Chip... The 10 Ct in my Picture is an Example like i want to stamp them... The Chip should NOT colored:

White
Red
Blue
Yellow
Green

And the Chips should have sharp edges...

 

[T_Chan]

@Gear can do the milling for you, but not the hot stamping. He can make a clear label that looks like a hot stamp though if I remember correctly.

 

[Timo Wottka]

Hmmm okay, but if i Start this Project i would like to have real hotstamps
Or is this not possible to do???

 

[Timo Wottka]

Looking for someone, who has 200 Paulson Chips same colored and who can milled and re-stamped them... Is a Person like this in this Forum???