SOLD MILLED THC SOLID RACKS

Status
Not open for further replies.

ChaosRock

4 of a Kind
Supporting Member
Joined
May 5, 2013
Messages
5,188
Reaction score
8,113
Location
Pure Michigan
Rating - 100%
34   0   0
Hello everyone,

Up for sale are a few racks of MILLED THC SOLIDS. Prices reflect my cost to have them milled.

1 3 x 100 DAY BLUE - $140/rack - Good condition. One small problem, I would not advise one person buying all racks since there's a wee difference in the chips size. Nothing major, maybe a 1/10 of a mm but just want to be upfront about it. The racks were picked so that the chips close to their sizes are together - ONE RACK SOLD TO @Regularjohn ONE RACK SOLD to @MaxB

1 x 100 ROYAL RED - $130/rack - Good edge condition with some color variation. One of the chips is an outlier and has a different shade of red altogether

1 2 x 100 CHERRY RED - $130/rack - Good edges but more color variation. Slight variance in diameter. ONE RACK SOLD to @Regularjohn

1 x 100 DARK GREEN - $150/rack - Mint but since they are old, they are a bit dirty.

2 x 100 BLACK - $150/rack - Mint but since they are old, they are a bit chalky, better than the green imo

Prices are FIRM and shipping will be added to them.

I'm adding a label in one of the chips to give you an idea of the milled recess, 7/8s (maybe a little more than that)

Thanks for looking guys,

Paulo-


IMG_0225.jpeg
IMG_0226.jpeg
IMG_0227.jpeg
IMG_0228.jpeg
IMG_0229.jpeg
IMG_0230.jpeg
IMG_0231.jpeg
 
Last edited:

OlNoiShi

3 of a Kind
Supporting Member
Joined
Apr 7, 2019
Messages
654
Reaction score
1,522
Location
FRANCE
Rating - 100%
24   0   0
I'm adding a label in one of the chips to give you an idea of the milled recess, 7/8s.

A tiny bit larger than 7/8s. Gears label fits in really well. Not super, super tightly bit with room enough so that applying the labels are not a nightmare.

7/8s is different than 7/8"?

A 7/8" is 22,2mm and look like this :

1595675134740.png


Yours look much bigger.
 

ChaosRock

4 of a Kind
Supporting Member
Joined
May 5, 2013
Messages
5,188
Reaction score
8,113
Location
Pure Michigan
Rating - 100%
34   0   0
7/8s is different than 7/8"?

A 7/8" is 22,2mm and look like this :

View attachment 497590

Yours look much bigger.

I do not have a caliper on hand to measure but the milling is a bit larger than 7/8s as I mentioned above. The label used on the green chip is from GEAR and meant for label-over on a THC. It fits perfectly and the CNC settings were tailored for those labels. That label seems to be a bit larger than 7/8s and the recess is even a little larger than that. Using a ruler, it seems like a 15/16s.

That's why I posted pictures of both the face and the recess with the label.
 

TheWhat

Two Pair
Joined
Apr 23, 2020
Messages
482
Reaction score
371
Location
MB, Canada
Rating - 100%
1   0   0

Attachments

  • Screenshot_20200725-100139_Samsung Internet.jpg
    Screenshot_20200725-100139_Samsung Internet.jpg
    50.2 KB · Views: 17
Status
Not open for further replies.
Top Bottom