Lighted raised rail - diffuser (1 Viewer)

Jake14mw

Flush
Joined
Oct 5, 2015
Messages
2,269
Reaction score
1,941
Location
Connecticut
Hi all,

How do people build their raised rail tables with lights? I built one about 10 years ago, and I think I just used an extra layer of 3/4 ply, set back. For the diffuser, I used a plastic wall corner guard material from Home Depot (pictured below, wow, you never realize how dirty your table is until you take extreme, well lit closeups!). Simple installation because it was in an L shape, and I could just nail it to the rail. What does everybody use today? I see people talking about buying plexiglass. How much does that generally cost? How is it installed? I like the milky white consistent look of them. Any other things people use for the diffuser material? Thanks for the help.
diffuser.jpg
 
I used a company online called tap plastics. They will cut to width and length (max 94” I think) also they have several frosted to white to chose from depending on how much light you want to be seen or how much you want the light diffused. The more diffusing the less you’ll see the individual led’s inside and also the more distance from the diffuser the less you’ll see the led’s. It wasn’t that expensive, maybe $35-$45 for 3 strips plus a little for shipping.
As for the way to build it. There are good pics and instructions on here. Just search led rails. I copied how T Chan does it. And most people who build them do it basically the same. I’ll try to find it and add the link. You need two pieces of ply and plywood spacers or any wood spacers really that will hold screws.
 

Attachments

  • 9F1E7824-F789-4D5B-A945-B31F2AD4770C.jpeg
    9F1E7824-F789-4D5B-A945-B31F2AD4770C.jpeg
    335.6 KB · Views: 435
  • 39D0A661-B919-490D-AF00-B55CE8E15E96.jpeg
    39D0A661-B919-490D-AF00-B55CE8E15E96.jpeg
    313.4 KB · Views: 428
  • BEAD8BF7-E133-470E-96B9-3ABF3DFCB816.jpeg
    BEAD8BF7-E133-470E-96B9-3ABF3DFCB816.jpeg
    117 KB · Views: 462
  • 528368C4-9D79-4E0A-9117-4A2F39AF9957.jpeg
    528368C4-9D79-4E0A-9117-4A2F39AF9957.jpeg
    120.8 KB · Views: 476
  • 00733D6E-06DE-4C97-99B2-06F306420461.jpeg
    00733D6E-06DE-4C97-99B2-06F306420461.jpeg
    249.1 KB · Views: 466
  • A74909C8-4D4A-4DD3-A0BF-4F1B61ACA426.jpeg
    A74909C8-4D4A-4DD3-A0BF-4F1B61ACA426.jpeg
    407.1 KB · Views: 520
Last edited:
Last edited:
Hi all,

How do people build their raised rail tables with lights? I built one about 10 years ago, and I think I just used an extra layer of 3/4 ply, set back. For the diffuser, I used a plastic wall corner guard material from Home Depot (pictured below, wow, you never realize how dirty your table is until you take extreme, well lit closeups!). Simple installation because it was in an L shape, and I could just nail it to the rail. What does everybody use today? I see people talking about buying plexiglass. How much does that generally cost? How is it installed? I like the milky white consistent look of them. Any other things people use for the diffuser material? Thanks for the help.View attachment 333499
If you want a cheap alternative, or something to hold you over. 3/8" poly tubing from Home Depot does the trick. I'll try to post a close-up pic later.
 
I used a strip of 1/8" thick clear acrylic as a window. It works great, and allows me to keep the rail very low - I don't like high rails. The LEDs are running on rechargeable battery packs that are stored under the table - this is to avoid having an extension cord running around people's feet. The batteries are great, they run all night long. However, the LEDs aren't quite as bright as they might be if I could have powered them from a wall outlet. That's why I kept the clear acrylic clear - I wanted to allow as might light as possible to pass through, plus the acrylic would have had more glare if it had been sandblasted.

@stevea mentioned Tap Plastics. They're an excellent source for acrylic sheet. EPlastics.com is good too.

Clear polycarbonate is a good material as well. It is more flexible than acrylic and *much* more durable (it won't crack like acrylic can). Just be very careful when you're working with polycarbonate. You can cut it with power tools, but spinning or rotating tools can grab the polycarbonate, rip it out of the your hands, and could result in all sorts of chaos and woe and gnashing of teeth. Also, acrylic is more resistant to scratches than polycarb.

@Darson - those dice are a really cool idea!!
 

Attachments

  • Rail Section.jpg
    Rail Section.jpg
    68.4 KB · Views: 218

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account and join our community. It's easy!

Log in

Already have an account? Log in here.

Back
Top Bottom