Help on materials

DeusEx

Two Pair
Supporting Member
Joined
May 11, 2021
Messages
272
Reaction score
313
Location
In Orbit
So I'm looking at YAT and .. not sure on what materials I want. I plan to have a shuffler but I want to be able to shuffle with easy, however I want to have supporting padding to support chips stacked 40 high.

What would be the best option or what is the cons on this ?

Looks like there is only one option on the rail padding. Should I put a headliner on the rail and then vinyl or just vinyl, what would be the pros for adding a headliner first?

Thanks!
 

xdan

Straight
Joined
Nov 8, 2014
Messages
963
Reaction score
1,062
Location
Australia
So I'm looking at YAT and .. not sure on what materials I want. I plan to have a shuffler but I want to be able to shuffle with easy, however I want to have supporting padding to support chips stacked 40 high.

What would be the best option or what is the cons on this ?

Looks like there is only one option on the rail padding. Should I put a headliner on the rail and then vinyl or just vinyl, what would be the pros for adding a headliner first?

Thanks!
6mm or 1/4” for the playing surface
25mm or 1” for the rail

that’s what I use.
No issues stacking the chips.
 

PARADOX

Pair
Joined
Jan 17, 2021
Messages
122
Reaction score
116
Location
US
There is a really good post detailing the difference in playing surfaces. I think if you search playing surface comparisons it should show up.

I have 1/4 neoprene on mine and haven't had any complaints.
 
Top Bottom