I brought the table out of storage and setup it back up....thought I would share some pics of the assembly....took about 40 minutes start to finish.
The legs are about 60lbs each so relatively easy to move around. The table base holder do-hicky has wheels...it's just narrow enough to fit through standard doorways so I rolled it right out of the storage closet.
Another angle of the table base and the do-hicky. Table is bolted to the holder using 4 bolts.
Here is the table base resting on the legs.
This is a solo job. Not much lifting required to get it all the way onto the legs.
Unscrew the 4 bolts and do-hicky comes off.
Here are rails in the closet hanging on a couple of hooks.
I bolted on 2 pieces of scrap wood to the rails...that's where I looped a little piece of wire to hang into the hooks on the walls.
The rails are really light....take the scrap wood off and goes right on the table. I attach to the table using bolts.
And the table is back together in about 30-40 minutes. No help needed from anyone else. Taking it apart takes a little less time.
I do need to build a topper so I don't have to put it away as often. But, that space is also used for a ping pong table and other kid stuff, so I would have to put it away in the closet a couple of times a year minimum. I hope that's helpful to anyone that is customizing their own table!