48" Round Kitchen Table Build (1 Viewer)

[stonker]

Building a small 48" table mostly to gain experience in wrapping the rail. The table was purchased from craigslist.
I noticed how easily the paint was pealing off when routing so I decided to scrape the paint off.
I was hoping to use the ring I cut off the table for the lower rail but it fell apart in 6 pcs.
Progress pics to follow.

 

[stonker]

Painted the apron black
Glued two thicknesses of headliner
Stapled black outdoor fabric
Added iron on patches over rail mounting holes

 

[stonker]

Wrapped the rail in foam today
YAT 1', 65lb foam covered by headliner
The only thing left to do is wrap the rail in vinyl

 

[ledge4131]

What jig are you using for your router?

 

[stonker]

What jig are you using for your router?

It's a Lewin Router Compass

 

[Sprouty]

Nice work!

Following, I have a similar table in my basement that I plan on doing the same thing to.

 

[stonker]

Not sure if it was the vinyl that i used, the hot day or the addition of using a hot air gun but the rail turned out better than I have done before.

 

[DoubleEagle]

using a hot air gun

^^^ That