Cancelled 180 Elite poker chips- price reduced (1 Viewer)

Status
Not open for further replies.

ad119

Pair
Joined
Mar 1, 2018
Messages
242
Reaction score
294
Location
New jersey
Rating - 100%
24   0   0
selling 180 elite chips, 20 of each denomination shown. Asking $160 shipped CONUS, PayPal F&F.

Thanks for looking
 

Attachments

  • 2281A79F-CF9F-4C4F-AC95-010B5C7D27A5.jpeg
    2281A79F-CF9F-4C4F-AC95-010B5C7D27A5.jpeg
    142.3 KB · Views: 312
  • 987F5075-A799-4188-A6BD-05818F6A7731.jpeg
    987F5075-A799-4188-A6BD-05818F6A7731.jpeg
    156.5 KB · Views: 342
  • BF85A8A2-FE68-482C-8AA7-F07503AC785C.jpeg
    BF85A8A2-FE68-482C-8AA7-F07503AC785C.jpeg
    150.1 KB · Views: 234
Last edited:
I figured that much. Their colors and how much they pop would make incredible seat buttons but unfortunately just not possible.
 
Would it be possible to mill the whole face off and then put a label recess in these? There’s no mold imprint to worry about and they are pretty minty thick.
 
Would it be possible to mill the whole face off and then put a label recess in these? There’s no mold imprint to worry about and they are pretty minty thick.

Once the label is off, the chip has two levels of recess. Are you saying the mill the outer recess to match the inner recess? It would work, but the result is going to look quite strange...
 
Once the label is off, the chip has two levels of recess. Are you saying the mill the outer recess to match the inner recess? It would work, but the result is going to look quite strange...
Two recesses! So a laminated label and then a foil glitter ring?
 
  • Like
Reactions: ttt
Here is an example of an oversized inlay that has been removed to show the two recesses.

1587010670337.png
 
  • Like
Reactions: ttt
The lammer mold Elites will look much better than RHC molds with giant inlays removed, since there won't be any cut-off hats (essentially turning it into a half-hat & cane mold once relabeled, lol).

Best way to fill the dual-depth recesses imo is to first put down a label in the inner recess, then cover it with a bigger diameter inlay sized to fit the larger recess. Makes the final product both heavier and more uniform, without a concave dip or recess edge showing underneath the label.
 
Status
Not open for further replies.
Back
Top Bottom